58 Jobs: Job Vacancies for Bayan Baru Area
Sr Analog Circuit Design Engineer (High-Speed I/O)ID:59652
10,000 MYR ~ 22,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
We are seeking a Circuit/Analog Design Engineer to develop high-performance analog/mixed-signal IPs from architecture through tapeout and silicon bring-up. The candidate should have specialized expertise in High-Speed I/O as described below. Seniority level to be determined by experience.Key Responsibilities• Design TX/RX, analog front-end, serializers/deserializers, high-speed level shifters, predrivers/drivers, and termination/impedance calibration blocks.• Equalization: Feed-Forward Equalization (FFE), DFE, CTLE and related adaptation/control loops.• Clocking support for links (e.g., CDR interactions, low-jitter clock generation/distribution as needed by PHY).• SI analysis and creation/validation of IBIS/IBIS-AMI models; channel characterization (insertion loss, return loss, crosstalk) and eye diagram margin assessment.• Own end-to-end block/IP delivery: architecture studies, specification, transistor-level design, simulation, post-layout sign-off, and silicon bring-up/characterization.• Build verification test benches; validate performance across PVT corners, mismatch/Monte Carlo (as applicable), and post-extraction parasitics.• Work closely with layout/mask designers: floorplanning guidance, layout reviews, and ensuring LVS/DRC clean implementation and parasitic awareness.• Support interface integration and sign-off: PPA optimization, reliability checks (e.g., EM/IR, aging/overstress), and timing closure collaboration.• Support IP integration on to Testchip as well as post-silicon evaluation including correlation with simulation and root-cause analysis for first-silicon bring-up.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementSr Analog Circuit Design Engineer (Pure Analog)ID:59651
10,000 MYR ~ 22,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
We are seeking a Circuit/Analog Design Engineer to develop high-performance analog/mixed-signal IPs from architecture through tapeout and silicon bring-up. Seniority level to be determined by experience.Key Responsibilities• Reference generation: bandgap, bias circuits, reference voltages/currents; high-accuracy, low-noise design techniques.• Low offset / low-noise voltage regulators (LDO) and stability/compensation networks; PSRR and transient response optimization.• Voltage and power monitoring circuits: droop detection, voltage detectors, PowerGood and POR generation, analog sensing, and housekeeping blocks.• Power-management components, linear and/or switching-adjacent blocks, charge pumps, as applicable to the SoC/PHY environment.• Design/support ADC/DAC blocks and associated analog support circuits (sampling, references, amplifiers/comparators, clocking).• Voltage and temperature sensor design and characterization. Bandgap and PTAT-based temperature sensing; process corner detection circuits. Sensor readout, digitization, and calibration techniques.• Own end-to-end block/IP delivery: architecture studies, specification, transistor-level design, simulation, post-layout sign-off, and silicon bring-up/characterization.• Build verification test benches; validate performance across PVT corners, mismatch/Monte Carlo (as applicable), and post-extraction parasitics.• Work closely with layout/mask designers: floorplanning guidance, layout reviews, and ensuring LVS/DRC clean implementation and parasitic awareness.• Meet quality and reliability requirements (e.g., EM/IR, aging/overstress); contribute to robust design methodology and sign-off checklists.• Support IP integration on to Testchip as well as post-silicon evaluation including correlation with simulation and root-cause analysis for first-silicon bring-up.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly Increment[ Penang ] Business Development Senior Executive (Specialty Metal)ID:59579
8,000 MYR ~ 10,000 MYRTanjung Tokong, Tanjung Bungah, Gelugur, Georgetown, Jelutong, Air Itam, Bayan Lepas, Bayan Baru, Batu Maung, Bukit Jambul, Perai, Sebarang Jaya, Butterworth, Bukit Mertajam, Simpang Ampat, Juru, Nibong Tebal, Bukit Minyak, Batu KawanJob Description
< About the Role >We are looking for an experienced Business Development Assistant Manager to lead sales initiatives in Malaysia.The successful candidate will have a strong network in the specialty metals and precision machining industries, and will be tasked with identifying new business opportunities, maintaining client relationships, and driving sales growth.< Key Responsibilities >• Identify and pursue new business opportunities across Malaysia• Maintain strong relationships with key clients and decision-makers• Achieve monthly and annual sales targets• Conduct market research and competitive analysis• Develop proposals, quotations, and pricing strategies• Negotiate and close deals, ensuring timely payment collection• Prepare sales reports and track performance metrics• Collaborate with the Sales Director and Singapore HQ• Travel extensively within Malaysia (and occasionally to Singapore)• Report regularly via digital tools (email, Google Sheets, CRM)
Benefit
・Total Salary = RM 8,000 ~ RM 10,000
・Transportation expenses within Malaysia and Mobile Phone expenses will be a fixed monthly allowance.
・Traveling out of Malaysia will be on a reimbursement basis e.g. to Singapore.
・EPF and Socso will be provided.
・Commission Scheme: Performance-based, up to 20% of base salary
・Other benefits packages are open to be discussed during interviewProduct Specialist (Penang) (PN & EN)ID:59552
3,500 MYR ~ 5,000 MYRTanjung Tokong, Tanjung Bungah, Gelugur, Georgetown, Jelutong, Air Itam, Bayan Lepas, Bayan Baru, Batu Maung, Bukit Jambul, Perai, Sebarang Jaya, Butterworth, Bukit Mertajam, Simpang Ampat, Juru, Nibong Tebal, Bukit Minyak, Batu Kawan, Kota Damansara/Petaling JayaJob Description
• Responsible for achievement of the assigned territory’s Sales Budget • Maintain, cultivate and expand existing customers in line with Company’s growth strategies • Organize and conduct CME (Continuing Medical Education) activities to promote the specific product assigned • Maintain an updated comprehensive and classified list of physicians, hospitals and paramedical contacts • Regular reporting of market intelligence
Benefit
【Benefits】
- Annual Leave
- Medical Leave
- EPF Contribution
- SOCSO
- Entertainment Claims
- Company Team Building
- Insurance Coverage
- Medical Claims
- Optical & Dental Claims
- Performance Bonus
- Incentive Upon Hitting KPI
- Flexible Work Arrangement
- Fully Work From Home (WFH)
- Vehicle/ Transport AllowanceSr Memory Circuit Design EngineerID:59447
10,000 MYR ~ 22,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
We are seeking a Memory Circuit Design Engineer to design and verify high-performance, low-power SRAM and/or multi-port Register Files (RF) macros for integration into Memory Compiler software. You will own transistor-level design and simulations from specification through silicon correlation.Key Responsibilities• Design SRAM and/or multi-port Register Files (RF) circuits at transistor level (bitcell and periphery). • Define memory architecture/topology to meet power, performance, area, yield and Vmin targets.• Run schematic capture & SPICE simulations across PVT corners & Monte Carlo to close read/write margins.• Analyze & optimize critical paths (decoders, wordline drivers, sense amps, write drivers, IO) for speed & robustness.• Create concise margin/performance reports & track design closure metrics.• Drive post-layout verification with extraction & sign-off simulations; partner with layout for pitch- matched arrays.• Work with Design Automation/Software Team/EDA vendor• To integrate Memory circuits into Memory Compiler system• To automate/generate collateral views & timing/power models (Liberty/LEF/Verilog or equivalent)• Support silicon bring-up, characterization and simulation-to-silicon correlation.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementSenior Silicon Validation EngineerID:59446
8,000 MYR ~ 19,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
We are seeking a Silicon Validation Engineer to lead silicon bring-up and post-silicon characterization of new Testchips. This hands-on lab role drives test development, automation, data analysis, and cross-team debug closure from power-on to characterization sign-off.Key Responsibilities• Lead Day-0/Day-1 bring-up: safe power-up, clocks/resets, basic access, and smoke tests on first silicon.• Define and execute post-silicon validation/characterization plans with clear milestones and pass/fail criteria. • Develop and deploy silicon tests (bare-metal/low-level software) and maintain repeatable test procedures. • Build automation for test execution, data capture, and regression (Python preferred).• Collect and analyze characterization data (e.g., performance, power, voltage/temperature margins); summarize trends and anomalies.• Triage and debug silicon failures; drive root-cause with design/verification/firmware teams and validate fixes/workarounds.• Improve debug efficiency by proposing/leveraging on-chip observability (registers, counters, logs) and lab measurement methods.• Document lab setup, test methods, results, and silicon errata; create silicon reports; communicate status, risks, and recommendations.• Define specifications for eval/char boards.
Benefit
- Annual Leave
- Medical Leave
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementSenior Staff IP Logic Design EngineerID:59445
8,000 MYR ~ 15,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
The Senior IP Logic Design Engineer will be responsible for the design and implementation of logic design, microarchitecture definition, RTL coding, IP releases, high speed timing convergence, and collaboration with cross-functional teams to meet project specifications. Tasks also functional validation through black box and white box validation, FPV validation, functional validation as well as emulations.Key Responsibilities:1. IP Design Responsibility• Define and design Unit Level / Layer Level IP Design that able to converge timing at high end process node, with high frequency requirements.• Ability to produce testplans to cover design requirement2. IP Quality Responsibility• Ability to execute design validations, FPV, lintra, CDC and etc tools3. IP Releases• Owning the IP Releases for customer release depending on the assignment
Benefit
- Annual Leave
- Medical Leave
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementSenior/Staff/Principal Engineer, Circuit DesignID:59444
6,500 MYR ~ 8,500 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
• Design and implement high speed interfaces and complex mixed-signal circuits using cutting-edge CMOS tech and EDA tools.• Design block IO blocks such as compensation circuit, reference voltage, transmitters and receivers.• Sub blocks include and not confined to , high speed serializers and deserializers, high speed levelshifters , predrivers , drivers , Feed Forward Equalization , DFE , CTLE.• Block to pass rigorous quality and reliability like EM-IR , Aging , Overstress• Run initial SI analysis and IBIS/IBIS-AMI creations.• Timing closure using Prime-Time or equivalent methods.• Work on serial and parallel interfaces.• Work closely with mask designers to deliver the physical design and assist with silicon evaluation.• Perform architecture studies, circuit designs & simulations, floor-planning, instructing mask designers, reliability verifications and silicon bring-up.
Benefit
- Annual Leave
- Medical Leave
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementNoC Senior Design EngineerID:59416
8,000 MYR ~ 15,000 MYRBayan Lepas, Bayan BaruJob Description
Role Overview We are seeking Senior Design Engineer specializing in Network-on-Chip (NoC) to join our cutting-edge semiconductor team. This role involves architecting, designing, and optimizing NoC interconnect solutions for high-performance chips. You will work closely with architects, verification engineers, and software teams to deliver scalable, efficient, and low-latency interconnect designs. Job Description: • NoC Architecture/Micro-architect & Design: Develop and optimize high-performance, scalable, and low-latency NoC solutions for SoCs and multi-core processors. • Performance Analysis: Conduct traffic modeling, simulation, and bottleneck analysis to optimize NoC throughput and latency. • Verification & Validation: Collaborate with verification teams to develop testbenches, ensure functional correctness, and debug issues. • Power & Area Optimization: Optimize NoC designs for low-power and area-efficient implementations, working closely with physical design teams. • Integration & Customization: Work on custom NoC configurations, integrating third-party IPs, and tailoring interconnect solutions for specific applications. • Tool & Flow Development: Enhance NoC design methodologies by developing scripts, automation flows, and performance monitoring tools. • Cross-functional Collaboration: Work with chip architects, backend engineers, and software teams to define NoC requirements and optimize for real-world workloads.
Benefit
- Annual Leave
- Medical Leave
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementSenior RTL Design EngineerID:59415
10,000 MYR ~ 20,000 MYRBayan Lepas, Bayan BaruJob Description
Role DescriptionThis is a full-time on-site role based in Penang for a Senior RTL Design Engineer specializing in Memory PHY and Controller IP.. The engineer will take ownership of logic sub-blocks within the PHY, contributing to RTL implementation, functional verification, and timing/power constraint definition. The role requires close collaboration with design verification (DV), firmware, and physical design teams to ensure high-quality, high-speed RTL that meets power, performance, and area (PPA) goals.The candidate should have a strong foundation in RTL design, timing analysis, and design methodology best practices, and be capable of driving design closure through disciplined debugging, scripting, and continuous flow improvements.Key Responsibilities1. Block Ownership and RTL Design Implementation• Take ownership of assigned logic sub-blocks within the Memory PHY or Controller IP.• Contribute to RTL design, code review, and integration in collaboration with PHY and full-chip design teams.• Ensure compliance with architecture specifications and coding guidelines.• Understand PHY–Firmware interaction for training, calibration, and initialization sequences.• Develop local testbenches to functionally verify assigned PHY sub-blocks.• Collaborate with DV engineers to debug simulation failures, analyze waveforms, and identify root causes for corner-case issues.2. Behavioral Modeling and Verification Support• Develop and maintain behavioral models for PHY sub-blocks.• Ensure equivalence between behavioral models and schematics through established equivalence-check (LEC/FEV) flows.• Provide model updates to align with design and architectural changes.3. Constraint and Power Intent Definition• Participate in the creation and validation of SDC (timing) and UPF (power intent) files for sub-blocks and/or the top-level PHY.• Validate constraint correctness and ensure smooth handoff to STA and physical design teams.4. Static Verification (Lint / CDC / RDC)• Run Lint, CDC, and RDC checks for sub-blocks and top-level PHY.• Review and debug violations, provide waivers with technical justification.• Support and guide the design team in interpreting and resolving RDC-related issues.5. Code Coverage and Waivers• Support DV team in achieving code coverage closure, reviewing unhit regions, suggesting test scenarios, and writing justified waivers.• Participate in coverage reviews and track closure progress toward sign-off.
Benefit
- Annual Leave
- Medical Leave
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly Increment
