11 Jobs: Job Vacancies for Production/Manufacturing Technology Development Positions
Instrumentation Engineer (Bentong) (Fresh Grads OK)ID:60327
4,000 MYR ~ 10,000 MYRPahangJob Description
Position SummaryThe Instrumentation Engineer is responsible for ensuring the reliability, accuracy, and integrity of all instrumentation, control systems, and automation equipment used across company's rubber thread production facilities. The role supports continuous operations by maintaining, troubleshooting, calibrating, and improving sensors, analyzers, PLC/SCADA systems, and process-monitoring devices throughout the compounding, extrusion, , drying, curing, effluent-treatment, water-treatment, and utilities areas.The ideal candidate has experience in a manufacturing environment, preferably within latex, rubber, polymer, or chemical processing industries, and possesses strong analytical, diagnostic, and problem-solving capabilities.Key Responsibilities1. Instrumentation Maintenance & Troubleshooting- Perform routine inspection, calibration, tuning, and preventive maintenance of all instrumentation devices, including:- Level, flow, pressure, temperature, and pH sensors- Load cells, viscosity meters, thermocouples, RTDs- Dosing-pump controllers, flow meters, and pressure transmitters- Process analyzers in compounding, acid baths, water-bath monitoring, drying ovens, and curing ovens- Diagnose failures and ensure timely corrective actions to minimize downtime in production lines.2. Control Systems & Automation- Knowledgeable in handling and programming Siemens TIA Portal- Support PLC, HMI, and SCADA system troubleshooting, modifications, and improvements (Siemens, Omron, Allen-Bradley or equivalent).- Assist in programming logic corrections, alarm settings, and process-parameter tuning for extrusion control, oven temperature control, talcum-powdering systems, curing profiles, and festooning equipment.- Ensure proper integration of sensors and control elements with mechanical and electrical systems.3. Process Stability & Quality Assurance- Monitor key production parameters- Ensure accuracy of instrumentation data used by Chemical Lab and Physical Lab for QC testing and product-spec verification.- Proactively identify instrumentation-related issues that could impact thread quality (e.g., diameter variations, coagulation inconsistencies, humidity defects, ribboning temperature deviations).4. Project Implementation & Continuous Improvement- Execute instrumentation upgrades, line expansions, and new equipment commissioning.- Recommend improvements for sensor selection, data-logging systems, predictive-maintenance tools, and automation enhancements.- Work closely with mechanical, electrical, chemical, and production teams on reduction of breakdowns and optimization of energy usage.5. Documentation & Compliance- Maintain accurate calibration records, loop drawings, wiring diagrams, and PM schedules.- Prepare technical reports, root-cause analyses, and failure-mode documentation.- Ensure compliance with internal safety procedures, OEM specifications, and industry standards.
Benefit
- Annual Leave 12 days
- 13th months salary
- Accommodation provided
- Higher than industry average performance bonus
- Outpatient Medical (including spouse and dependent) and Dental benefit (Employee only)
- Group hospitalization (including spouse and dependent) and Group Personal Accident (Employee only)
- Public holiday falls on a Saturday, one day is credited to the leave credits【Japanese Speaker】 Production ManagerID:60315
6,000 MYR ~ 13,000 MYRMalaccaJob Description
We are hoping to employ an experienced Production Manager (Japanese speaker) who will organize and oversee the manufacturing of products. They willbe responsible for the safe and effective running of all production lines including the quality of output, cost control, and health and safety & environment• Overseeing manufacturing and production processes.• Creating and executing daily, weekly, monthly, and annual production schedules.• Resource management such as 4M optimization.• Striving to reduce expenses and increase productivity across all product lines.• Maintaining safe working environment for both employees and the production facility itself.• Implementing all the company’s procedures, policies and process rules.• Communicating any problems or obstacles to senior management.• Monitoring productivity rates, standards, and quality control.• Training and coaching employees such as Operators and Leaders.• Implementing safety, health, environment, and quality requirements.
Benefit
Salary: ~RM6K - RM13K
AL: Starting from 8 days
SL: 14 / 18 / 22 days
<Other benefits>
• Performance bonus - depends on company and individual performance
• Medical coverage
• Personal insuranceASSISTANT ENGINEER / ENGINEER (PRODUCTION)ID:60314
3,000 MYR ~ 4,600 MYRShah AlamJob Description
- To ensure production runs smoothly.- To ensure production meets target and consistent quality output.- To supervise team of technician and operators in the Section.- To monitor, follow up and improve production operation and process while complying to quality, environment, safety and RBA.
Benefit
-Salary: RM3,000 - 4,600
- 5 days of work
- Annual Leave (14 days)
- Medical Leave (14 days)
- Medical Cover for Family
- Hospitalizations Insurance
- Personal Accident Insurance
- Monthly Performance Incentives
- Free Parking
- Free Uniform
- Subsidize Meal
- Health Care
- Course Subsidies for Self-Developments
- Retirement Benefits
- Training & Developments
- Dental Care
- Plus other BenefitsProduction ManagerID:60282
10,000 MYR ~ 18,000 MYRNibong TebalJob Description
• Oversee daily production activities to ensure production targets, quality standards, and delivery schedules are achieved.• Monitor production performance and implement improvements to increase productivity and efficiency.• Coordinate manpower, machines, and materials to ensure smooth production flow.• Ensure proper implementation of production plans and work instructions.• Identify opportunities for process improvement and cost reduction in manufacturing operations.• Implement preventive measures to reduce defects, downtime, and operational risks.• Work with engineering and quality teams to optimize manufacturing processes.• Investigate customer complaints or findings related to production issues.• Lead root cause analysis and implement corrective and preventive actions (CAPA).• Ensure corrective actions are effectively implemented and monitored.• Ensure compliance with company EHS policies and procedures.• Promote a safe working environment and enforce safety practices in the production area.• Support safety initiatives, audits, and incident investigations.• Supervise production supervisors and operators.• Provide guidance, coaching, and training to improve team performance.• Monitor staff attendance, discipline, and performance.• Participate in Lean Manufacturing, 5S, and continuous improvement activities.• Analyze production data and recommend improvement actions.• Support new product introduction and process implementation.
Benefit
- Annual Leave 10 days
- Medical Leave 14 days
- Meal Allowance
- Yearly Bonus
- Salary Increment
- Medical Benefit and Insurance
- Maternity and Paternity LeaveProcess Engineer (Fresh Grads OK)ID:60000
3,860 MYR ~ 6,360 MYRBukit MinyakJob Description
- Developing, optimising and improving manufacturing processes to enhance productivity, quality and safety.- Identifying and implementing process improvements to reduce costs, minimise waste and increase efficiency- Collaborating with cross-functional teams to ensure smooth integration of new processes, technologies and equipment.- Monitoring and analysing process data, identifying trends and proposing solutions for process improvement continuously- Performing process capability studies, statistical analysis and data-driven decision-making t achieve operational excellence and meet production targets- Maintain procedures, control plan and record- Handle customer audit- Support quality team in any customer feedback
Benefit
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performanceEquipment Engineer (Fresh Grads OK)ID:59834
3,860 MYR ~ 5,360 MYRBukit MinyakJob Description
1. Troubleshoot and repair machine to ensure minimum downtime.2. Work on preventive measure to eliminate unplan downtime.3. Continuous improvement to reduce machine scrap and improve yield.4. Analyse machine rejection and propose solution.5. Ensure analyse and inform quality team if rejection related to incoming component.6. Support quality team to reply customer feedback if any.7. Spare part inventory control. Maintain min and max inventory and review if changes needed.8. Work with vendor to develop new equipment when needed.
Benefit
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performanceProcess Improvement/Yield Engineer ID:59807
3,500 MYR ~ 7,000 MYRMalaccaJob Description
• Develop and implement manufacturing processes and procedures to optimize production efficiency, quality, and safety.• Collaborate with cross-functional teams, including design engineering, production, and quality assurance, to develop and implement new products or processes.• Drive continuous improvement initiatives and lean manufacturing principles to enhance productivity, reduce waste, and improve overall operational performance.• Monitor and analyze production data and metrics to identify areas for improvement and implement corrective actions as needed.• Ensure compliance with company policies, regulatory requirements, and industry standards to maintain a safe and environmentally friendly work environment.• Manage and oversee in engineering terms the implementation of new equipment, technologies, and automation systems to enhance manufacturing capabilities and efficiency.• Develop and manage the manufacturing line in terms of engineering, ensuring optimal allocation of resources and cost control.• Collaborate with suppliers and vendors to source and evaluate new technologies, materials, and equipment to improve manufacturing processes and reduce costs.• Provide technical support and guidance to resolve complex manufacturing issues, troubleshoot problems, and optimize production output.
Benefit
Salary: ~RM3.5K - RM7K
AL: Starting from 8 days
SL: 14 / 18 / 22 days
<Other benefits>
• Performance bonus - depends on company and individual performance
• Medical coverage
• Personal insurance【Japanese Speaker】 Automation Engineer (Office Automation dept)ID:59621
4,300 MYR ~ 4,800 MYRShah AlamJob Description
1) Auto Inspection handling (programming, teaching and trouble shoot)2) Window person with KD (sister company at ShenZhen, China); cross technology transfer (quality)3) Automation creative4) New models development
Benefit
Salary: RM 4,300 - 4,800 (depending on working experiences)
(Basic Salary: RM3,500 - 4,000)
- RM 800 (Language allowance) will be provided with N2 or above certificate
※This will be assessed and decided by the client during the interview.
- AL/YEAR: Less than 2y of svc = 8 days, 2y- 5y of svc = 12, more than 5y svc = 16days
- MC/YEAR: Less than 2y of svc = 14 days, 2y- 5y of svc = 18, more than 5y svc = 22 days
- EPF,SOCSO,EIS
- Medical Allowance
- Insurance
- Commuting expenses covered
- Health check
- Housing / Car Subsidy ShcemeTool Maker (Stamping)ID:59553
3,000 MYR ~ 4,500 MYRBukit MinyakJob Description
- Maintaining stamping dies in good productive condition.- Analyze problem and repair tooling for corrective action.- Make improvement and propose corrective and preventive action.- Understand and read engineering drawing.- Setup and follow-up on die setup and minor trouble-shooting on press machine.- Assemble new tooling and modification / upgrading.- Operate surface grinding machine for fabrication, resurface and modification.- Completes routine die report for traceability / improvements and communicates effectively through detail information.- Control spare part inventory.- Conduct test runs with completed tools or dies to ensure that parts meet specifications; make adjustments as necessary.- File, grind, shim, and adjust different parts to properly fit them together.- Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.- Inspect finished dies for smoothness, contour conformity, and defects.- Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.- Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.- Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.- Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.- To handle other tasks and duties as and when requested by superior.
Benefit
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Medical RM200/year & Dental RM300/year
- Toll claimable (Candidate from Island only)
- Mobile allowances (Depend)
- Individual bonus - 1month fixed
- Increment every year (July) -Rate based on performanceR&D Director (Aluminium)ID:56559
20,000 MYR ~ 35,000 MYRKlangJob Description
・Develop and implement the R&D strategy aligned with the company's vision and market demands for coated fin.・Stay updated on industry trends, technologies, and competitor developments to maintain a competitive edge particularly, in the microelectronics sector, where new technological developments are occurring continuously specifically in paint coating technology.・Deliver & re-engineer process flow to ensure new products (paint) are cost competitive & consistently staying ahead of market.・Lead new product development activities from inception to product launch and customer acceptance including overseeing the design, testing, and production of new aluminium/coating related products.・Provide leadership and guidance for non-routine problems requiring substantial judgment in the independent evaluation, selection and adaptation of standard engineering techniques, procedures and criteria.・Work closely with cross-functional teams, including production, sales, and marketing, to ensure alignment of R&D projects with business objectives.・Track project schedules in conjunction with product management preparing to manage the R&D budget, ensuring cost-effective utilization of resources.・Take charge in the internal communication – to discuss the current issues in operations, daily and weekly and external communication – to experiment /develop new type of coating. Review feedback for continuous improvement on paint for added value.・Ensure all products and processes comply with local and international regulations and implement rigorous quality control and assurance practices.・Responsible to oversee and manage Customer Service department, including monitoring and reporting metrics such as productivity, response speed and any metric which affect the quality of service.
Benefit
・Basic Salary = RM 20,000 ~ RM 35,000
・Mobile Allowance = RM215/m
・AL: <2Y 20d, 2~5Y 22d, >5Y 24d
・MC: <2Y 14d, 2~5Y 18d, >5Y 22d
・EPF 15% after 2 years service
・Panel Clinic (unlimited)
・Hospitalization Coverage = RM 100k/y
**Covering children below 21 yo, spouse who is not working
・Dental Claim (Pay & Claim, RM 200/y)
・Insurance - Group PA, Group TL = 36 months salary
・All business travel claimable
・Variable bonus averagely 3 months per year
