85个职位: 招聘信息工程师(机械)

Senior Quality EngineerID:59076
5,000 MYR ~ 7,000 MYRSimpang Ampat, Bukit Minyak
工作内容
Responsibility:- Lead in assigned new project and transfer project qualification QA related activities. Responsible on Inspection Instruction establishment, preparation, first article inspection, capability study, measurement system analysis and PPAP packages.- Establish Training Need Analysis (TNA) and new or refresher training to quality technicians and inspectors on new and current inspection methods and criteria.- Compile, drive and lead nonconforming product control and failure analysis and follow-up corrective and continuous improvement plan.- Compile and drive Quality report and lead the internal and customer quality review meeting.- Handle and drive customer complaint and conduct failure analysis. Response and follow up on customer corrective action and improvement plan.- Coordinate and drive improvement on RMA activities and sorting / rework activities with supplier and customer.- Responsible for customer process audit, NPI qualification audit and customer system audit.- Responsible on Engineering change order, coordinate purging activities and monitor on documentation revising.- Responsible on supplier quality management.- To ensure RBA, Supplier Code of Conducts requirements are being met.- Other responsibilities are subject to the arrangement of the immediate superior/managementAuthority:- Establish and update the decision on new and current product inspection criteria.- To stop production or shipment when defective products are found in shortage time possible with immediate containment action.
福利制度
- Annual Leave:
0-2 years: 16 days
2-5 years: 20 days
5 years above: 23 days
- Medical Leave
0-2 years: 14 days
2-5 years: 18 days
5 years above: 22 days
- Company Insurance
- Medical Claim: RM 1,500 / year
- 13 months Bonus (December)
- Performance Bonus (before CNY)
- Transport Allowance: RM10/day
- Phone & Internet Allowance: RM100
- OT Claims
- Mileage: RM 0.80 / km
Heat Treatment Manager (Klin Drying & Thermal Modification)ID:59072
10,000 MYR ~ 12,000 MYRPahang
工作内容
<Key Responsibilities>1. Stacking Standards & Material Preparation • Develop and enforce correct stacking methods for different species and dimensions • Ensure even sticker spacing, airflow paths, board alignment, and load stability• Train stacking teams to minimize: warping, twisting, surface checking, inconsistent drying• Inspect all loads before they enter the kilns/thermal chambers 2. Heat Treatment Cycle Management (KD & Thermal)• Plan, run, and optimize heat-treatment cycles for all species• Ensure accurate control of: temperature ramps, humidity schedules, airflow • Adjust cycles based on board thickness, MC content, grain orientation, and defects• Monitor and analyze live data from sensors and probes• Maintain accurate documentation for every cycle 3. Defect Prevention & Quality Control During Treatment• Conduct QC checkpoints:- Pre-loading moisture content- Mid-cycle sampling- Final MC checks- Visual grading post-treatment• Reduce reject rates caused by:- Warping/bending- Inconsistent MC- Honeycombing- Internal/surface checks- Color inconsistency• Perform root-cause analysis and implement corrective action4. Machine, Kiln & Equipment Reliability • Oversee daily inspection and function checks for:- Kilns- Thermal modification chambers- Fans/blowers- Sensors - Moisture meters • Work closely with engineering to minimize downtime from:- Faulty sensors- Boiler pressure drops- Air leaks- Fan failures- Temperature inconsistencies• Implement preventive maintenance schedule (weekly/monthly)• Ensure calibration of all instruments and controls 5. Continuous Improvement & Yield Optimization • Analyze data to improve recovery %, reduce cycle duration, and lower energy usage• Optimize: - Airflow patterns- Chamber loading capacity- Energy consumption • Lead small trials to improve: - Thermal modification performance - Deeper colour penetration - Durability performance • Set and tract KPIS:- Net Recovery Rate- Reject Rate- Cycle Efficiency - Cost/M(3) Treated 6. Training and Team Competency• Train kiln/thermal operators in proper control, safety, and QC• Build strong discipline for SOPs and documentation• Improve operator understanding of wood behaviour during drying
福利制度
Salary range: ~RM10,000 - RM12,000

<Leaves>
AL: Starting from 16 days
SL: 14 / 18 / 22 days

<Other benefits>
• GPA 24x7 coverage
• GHS coverage up to RM50K/per annum
• Performance/KPI linked bonus
• Production output incentives
• Medical claims for GP treatment
Quality Assurance EngineerID:59030
5,000 MYR ~ 7,000 MYRBangsar
工作内容
< POSITION SUMMARY >This role is key in maintaining existing regulatory, quality systems and standards within the facilities in Malaysia and Philippines, reporting directly to the Country Manager and Regional QA Manager as functional line.Ensuring Business Unit (BU) compliance with corporate and BU procedures and establishing key performance indicators and metrics to successfully manage and improve performance is core to this role.< ESSENTIAL DUTIES AND RESPONSIBILITIES >・Assist with the establishment of a BU quality management system and ensuring compliance with all relevant Quality Standards, Directives and Regulations and ensure compliance in sites with regards to corporate policies and procedures.・Maintain records and files on all registrations of all existing products in the territories. These include Medical Device, Food Supplement and Cosmetic product registrations.・Liaise with all competent authorities and registration bodies as required with regards to Medical Device, Food Supplement and Cosmetic product regulations.・Assist in the maintenance of and ensure compliance with the current and future quality systems in line with current and any changes or updates to regulatory requirements and industry best practices on a global basis.・Develop and deliver key training programs to enhance quality & regulatory awareness throughout the BU internal and contract facilities as required.・Liaise with BU facilities and keep informed of registration status and resulting on going requirements.・Manage document change order process for both internal and contract distribution organizations.・Actively support all design activities from initiation to full product release as per regulatory requirements.・Assist and participate in Internal / External Audit system and support in preparation and hosting of Third Party Audits including audit training, control room setup, general audit readiness throughout the business and post audit follow up.・Advise on the requirements of post market surveillance to relevant QMS / ISO system.・Drive / Participate / Support in quality improvement projects/activities.・Compile data for management reviews.・Support and manage vendors as required.・Perform other duties and responsibilities as assigned.
福利制度
・Salary = RM 5,000 ~ RM 7,000
・AL: <2Y 16 days, 2~5Y 18 days, >5Y 20 days
・MC: <2Y 14 days, 2~5Y 18days, >5Y 22 days
・Monthly Phone Allowance ＝ RM150
・Monthly Staff Entitlement Product (Can claim 6 products per month)
・Medical, health insurance coverage
・Bonus (discretional)
・Company Activities: Team Gathering, Annual Dinner, Welcome Lunch
・No OT pay, working on Sat, Sun or Public Holiday will be entitled a replacement leave
[ Terengganu ] Advanced Manufacturing Engineering (AME) EngineerID:59043
3,000 MYR ~ 4,500 MYRTerengganu
工作内容
< ROLE OVERVIEW >To lead the development and implementation of advanced manufacturing technologies and processes, ensuring innovation, efficiency, and scalability for new product introductions and continuous improvement initiatives.< RESPONSIBILITIES AND DUTIES >Advanced Process Development Design and implement cutting-edge manufacturing processes for new products. Evaluate and integrate automation, robotics, and Industry 4.0 solutions.Technology Assessment & Implementation Research emerging manufacturing technologies and assess feasibility. Drive adoption of advanced tools such as additive manufacturing, smart sensors, and digital twins.New Product Introduction (NPI) Collaborate with design and R&D teams to ensure manufacturability. Develop process flow, tooling, and equipment for new product launches.Continuous Improvement Lead projects to enhance productivity, reduce cycle time, and improve quality. Apply Lean, Six Sigma, and advanced analytics for process optimization.Cost & Efficiency Conduct ROI analysis for new technologies and equipment. Optimize resource utilization and reduce operational costs.Compliance & Safety Ensure all advanced processes meet safety, environmental, and regulatory standards
福利制度
・All-in Salary = RM 3,000 ~ RM 4,500 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 Months
[ Rawang ] Customer Service TechnicianID:59042
2,000 MYR ~ 3,000 MYRRawang
工作内容
Support the Customer Service Engineer at the Customer Production Line Ensure customer line is supported at all times. Support Customer Service Engineer to resolve any issues at the customer end in a timely manner. To feedback to Customer Service Engineer accurate & timely information on all issues at the customer plant.Support all change implementation To support Customer Service Engineer for SQE to evaluate changes made by supplier and carry out fitment at the customer end.Follow up on Engineering Changes & Permits Support Customer Service Engineer for assurance engineering changes & permits are implemented in accordance to accepted procedures. Monitor the cut off for changes is done correctly and effectively.Support Customer Service Engineer in Monitor Quality System Involve in all rework or reprocessing at the Customer plant Control of non-conforming products.Ensure that material respect is followed at all times. Assist in the identification, development and implementation of new work instructions.Problem Solving Participate in problem solving teams.
福利制度
・All-in Salary = RM 2,000 ~ RM 3,000 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 Months
[ Tanjung Malim ] Customer Service TechnicianID:59041
2,000 MYR ~ 3,000 MYRPerak
工作内容
Support the Customer Service Engineer at the Customer Production Line Ensure customer line is supported at all times. Support Customer Service Engineer to resolve any issues at the customer end in a timely manner. To feedback to Customer Service Engineer accurate & timely information on all issues at the customer plant.Support all change implementation To support Customer Service Engineer for SQE to evaluate changes made by supplier and carry out fitment at the customer end.Follow up on Engineering Changes & Permits Support Customer Service Engineer for assurance engineering changes & permits are implemented in accordance to accepted procedures. Monitor the cut off for changes is done correctly and effectively.Support Customer Service Engineer in Monitor Quality System Involve in all rework or reprocessing at the Customer plant Control of non-conforming products.Ensure that material respect is followed at all times. Assist in the identification, development and implementation of new work instructions.Problem Solving Participate in problem solving teams.
福利制度
・All-in Salary = RM 2,000 ~ RM 3,000 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 Months
[ Terengganu ] Material PlannerID:59039
3,000 MYR ~ 4,500 MYRTerengganu
工作内容
・Plan, manage, and coordinate the flow of production-related materials to ensure continuous support for manufacturing activities.・Collaborate closely with the Warehouse and Production Planning teams to monitor material status and verify accurate consumption, minimizing the risk of production downtime.・Maintain inventory levels at or below target thresholds, while actively managing and reducing obsolete stock.・Establish and regularly update safety stock levels based on the production schedule and demand forecast.・Monitor and control inbound logistics costs, including efforts to reduce premium freight expenses.・Execute tasks and responsibilities in accordance with instructions and plans provided by the immediate superior.
福利制度
・All-in Salary = RM 3,000 ~ RM 4,500 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 Months
[ Putrajaya ] Design Release EngineerID:59038
3,500 MYR ~ 4,500 MYRPutrajaya/Cyberjaya
工作内容
1. Product Design Development & Implementation a. 3D Design in Vehicle level wiring harness packaging b. Routing Quality checking for wiring harness design c. Checking of Electrical aggregates (fouling etc.) in DMU to final sign off. d. Preparing the Info. Fitment Drawing of Electrical components & Wiring Harness. e. Solutions for the DFA & DFM and Vehicle level issues. f. Control Prints and other technical documentation g. Support design related activities/ built support at Customer location. h. Defining of electrical components. i. Ensure correct pilot build up (first piece) j. Evaluate and perform engineering judgement for Engineering Permit k. Define the validation plan as customer requirement l. Maintain and grow customer relations m. Train technicians n. Provide design leadership to ensure that all customer deliverables are met, while assuring accuracy and completeness of all design output2. Lead, Coordinate & Support on QVC activitiesa. Design for cost reductionb. Design for manufacturingc. Propose VAVE ideas to customer design house and follow up till approvedd. Support component localizatione. Support supplier optimization3. Support New Business Quotationa. Prepare related design document to support new project quotationb. Work with other department to react on each new project needs and related cost to support new project quotations.c. Support RFQ and customers presentations** Travel to China or India in necessary occasion
福利制度
・Salary = RM 3,500 ~ RM 4,500
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 Months
AOI Engineer (SMT) (Opportunity to work in Japan) ID:59000
3,500 MYR ~ 7,000 MYRMalacca
工作内容
The AOI (Automated Optical Inspection) Engineer plays a key role in ensuring product quality and consistency within Maruwa’s SMT (Surface Mount Technology) production lines. Automated Optical Inspection (AOI) engineers use specialized cameras, lighting, and image processing algorithms to develop and implement automated systems for detecting defects in manufactured products, particularly printed circuit boards (PCBs), ensuring quality and consistency. This position is responsible for developing, implementing, and optimizing automated inspection systems used to detect defects on printed circuit boards (PCBs) and electronic components. The AOI Engineer works closely with production and quality teams to enhance inspection accuracy, improve manufacturing efficiency, and support continuous improvement initiatives.• Design, configure, and optimize camera, lighting, and image processing setups used in SMT inspection equipment.• Create and fine-tune algorithms that identify solder joint defects, missing or misaligned components, and other PCB surface abnormalities.• Ensure AOI machines are effectively positioned after key stages such as component placement and reflow soldering.• Train and deploy machine learning or neural network models to improve defect recognition and reduce false calls.• Regularly calibrate AOI machines and validate inspection results to ensure reliability and repeatability.• Investigate inspection or production issues, perform root cause analysis, and support corrective actions.• Work with SMT process engineers, maintenance, and quality teams to improve inspection standards and reduce production errors.• Contribute to enhancing AOI programs, inspection parameters, and overall process capability within SMT operations.
福利制度
Salary: ~RM3.5K - RM7K

• AL
• SL
• Entitled to EPF, SOCSO, EIS

<Other benefits>
• Performance bonus - depends on company and individual performance
• Medical coverage
• Personal insurance
QC Manager (Printing)ID:58989
6,000 MYR ~ 8,000 MYRPasir Gudang
工作内容
We are seeking a highly experienced QC Incoming Manager with a strong background in printing processes and excellent color vision to join our team.Job Responsibilities:- Manage and supervise incoming quality control inspection for raw materials and printed components- Ensure all incoming materials meet printing quality standards, including color accuracy and consistency- Analyze defects related to printing, color variation, ink, and materials- Work closely with suppliers, production, and QC teams to resolve quality issues- Develop and improve QC incoming procedures and inspection standards- Prepare quality reports and support audits when required- Able to work independently and lead QC activities effectively
福利制度
- Bonus (Average 2 months Bonus)
- AL starting from 8 days
- MC starting from 14 days
- Transportation allowance: Claim Basis
- Free parking
- Hospitalization Leave
- Group Personal Accident Insurance