118个职位: 招聘信息 工程师(机械)
Mechanical Design & Field EngineerID:60418
3,000 MYR ~ 3,500 MYRShah Alam工作内容
■ COMPANY OUTLOOKThe company has expanded its business by focusing on freezing and compression technologies ever since its establishment in year of 1924.With more than 90 years of experience in this industry, we offer a comprehensive range of compressors with hundreds of models.As a thermal engineering company we have long contributed to providing business solutions to our customers based on these technologies and in turn continuously evolved our technology and services.■ JOB OVERVIEWWe are seeking a Mechanical Engineer for the end-to-end design of industrial cold rooms.You will transition daily between engineering design and active, under-construction project sites and ensure the proper installation, testing, and commissioning of large-scale cold storage facilities.■ KEY RESPONSIBILITIES• System Design: - Calculate cooling loads, heat gains, and equipment capacities. - Generate detailed P&IDs, piping layouts, and 3D models. - Specify compressors, evaporators, condensers, and expansion valves. - Design panel layouts, underfloor insulation, and pressure relief vents.• Site Survey: Visit raw, under-construction sites to measure dimensions and verify constraints.• Design Validation: Inspect on-site installations to ensure builders strictly follow your drawings.• Technical Support: Resolve engineering design clashes discovered during the active construction phase. ■ WORKING CONDITIONS• Environment: Time divided between an office desk and construction sites.• Mobility: May require travel & overnights to various regional or overseas project locations.• Physical Demand: Ability to climb scaffolding and walk rugged site terrain• Safety: Wearing full PPE is mandatory during frequent site inspections.
福利制度
・Salary Package : RM 3,000 - RM 3,500
(includes Fixed Transportation allowance : RM300)
・AL: <3Y 14d, 3~5Y 18d, >5Y 22d
・MC: <3Y 14d, 3~5Y 18d, >5Y 22d
・Medical Benefits
・Insurance coverage entitled upon joining
-> Hospital & Surgical + Personal Accident
・Annual Medical Claim based on receipt, max amount depend on age
- 20s: 1,000 RM
- 30s: 1,200 RM
- 40s: 1,400 RM
- 50s: 1,600 RM
・Increment: once a year, but after probation will be entitled based on good performance
・Bonus : 1 or 2 times in a year (subject to company performance)QA Engineer (Japanese Speaker)ID:60664
4,800 MYR ~ 5,300 MYROther Negeri Sembilan District工作内容
- Assist in corresponding to all customer related request and activities.- Assist in managing and preparing for all customer audit, internal audit and compliance audit.- Drive customer / internal corrective actions by carrying out root cause failure analysis, cross sectioning, dimensional analysis or other means.- Implements on-going quality improvement process working with inter-department teams to ensure the production and supply of product is in accordance with the quality and safety standard.- Assist in monitoring and improving in process and outgoing quality and handling of line quality related issue, implement and drive internal corrective actions.- Assist in developing and maintaining the quality system to ensure that all products going through proper process of development before Mass Production transition to meet the Quality Management System requirement.- Facilitate all quality reports, records and procedures are updated from time to time and arranged properly in accordance to ISA and Quality Management System.- Assist in Quality Data Management, maintaining inspection records, quality related update documents, code, standards and specifications as required by the quality system.- Assist in research and proposal to the management in the term of suitable and efficient methods of QC improvement that use of the industry.- Analyze, produce and present QC report to the management of company.- Assist in maintaining manual and electronic filing system for all correspondences.- Assist in establishing effective procedure and monitoring performance of environment test performance test and ensure compliance with ISO and customer's' requirements.- Perform other duties as assigned by the management.- Adhere and follow all the rules and regulation of company from time to time.
福利制度
◆ Basic Salary = RM4k~4.5k
◆ AL: <2y=13d, 2~5y=16d, >5y=19d
◆ MC: <2y=14d, 2~5y=18d, >5y=22d
◆ Language Allowance=RM300 (fixed)
◆ Attendance allowance=RM100 (pro-rated)
◆ Transport allowance=RM300 (pro-rated)
◆ Special Operational Allowance=RM50~150 (pro-rated)
◆ Bonus=Average 2M yearly (2.4M in Y2023)
◆ Increment=Average 5~6% yearly
◆ Free Meal (in-house cafeteria, breakfast, lunch, dinner)
◆ On-Call Allowances (Operational only, applicable for Executive & above)
◆ GHS/GPA (Hospitalization scheme)
◆ Out-patient at normal clinic under Medilink (including spouse & children, for married staff & including parents, for single staff) upcap at RM1500/y
◆ Coverage for GPA ,GTL & GHS (individual)
◆ Long service Award for 5Y, 10Y, 15Y, and 20Y of service
◆ Others Award- Perfect attendance award, Zero MC award, zero utilize medical outpatient benefit
◆ Recreational facility at D’Tempat Country Club
◆ Uniform & PPE provided
◆ Annual Dinner, Sport Events
◆ Training in Japan (2~3 times yearly)Production Engineer (Japanese Speaker)ID:60419
4,800 MYR ~ 5,300 MYROther Negeri Sembilan District工作内容
- Lead the production team to meet product quality and delivery requirements.- Optimize productivity and machinery capacity.- Initiate problem solving and trouble shooting processes.- Training the operation staff to meet production activities and targets.- Establish and maintain SOPs and quality records.- Initiate cost saving activities.- Initiate projects to improve production capability and efficiency.- To prepare research and proposal to management in terms of suitable and efficient methods of production improvement (KAIZEN) in automotive industry.- Responsible for implementation of new designs and techniques to improve plant operations and processes.- Plan manpower arrangements to support daily operations.- Develop KPI to align with company objectives.- To perform other duties as assigned by the management.- To lead in monitoring and improving process and drive internal corrective actions.- Adhere and follow all rules and regulations of company from time to time.
福利制度
◆ Basic Salary = RM4k~4.5k
◆ AL: <2y=13d, 2~5y=16d, >5y=19d
◆ MC: <2y=14d, 2~5y=18d, >5y=22d
◆ Language Allowance=RM300 (fixed)
◆ Attendance allowance=RM100 (pro-rated)
◆ Transport allowance=RM300 (pro-rated)
◆ Special Operational Allowance=RM50~150 (pro-rated)
◆ Bonus=Average 2M yearly (2.4M in Y2023)
◆ Increment=Average 5~6% yearly
◆ Free Meal (in-house cafeteria, breakfast, lunch, dinner)
◆ On-Call Allowances (Operational only, applicable for Executive & above)
◆ GHS/GPA (Hospitalization scheme)
◆ Out-patient at normal clinic under Medilink (including spouse & children, for married staff & including parents, for single staff) upcap at RM1500/y
◆ Coverage for GPA ,GTL & GHS (individual)
◆ Long service Award for 5Y, 10Y, 15Y, and 20Y of service
◆ Others Award- Perfect attendance award, Zero MC award, zero utilize medical outpatient benefit
◆ Recreational facility at D’Tempat Country Club
◆ Uniform & PPE provided
◆ Annual Dinner, Sport Events
◆ Training in Japan (2~3 times yearly)3D Drafter (Waste Water Treatment Plant)ID:60626
4,000 MYR ~ 7,500 MYRKota Damansara/Petaling Jaya工作内容
- Primary responsibilities include 3D conceptual engineering, design, and detailing of building structure with piping details.- Communicate with Project Manager in Japan HQ (in English) to understand drawing request based on HQ instruction and client requirement.- Support tender process by managing dateline and provide quality assurance on drawing deliverables.- Play as a Hub Designer role in future to support other international branches such as Myanmar, China, Thailand.- Participate in internal and customer reviews, in any necessary occasion.- Any ad-hoc drawing task upon request from superior or from Japan HQ.- Manage Engineering drawing eg; Process Flow Diagram, Piping Instrumentation Diagram, General arrangement drawing (layout/plot plan/piping plan)- Site visit for measurement/ collect data for Engineering.
福利制度
・Total Salary = RM 4,000 ~ RM 7,500
・AL: 1~2Y = 8 days, 3~4Y = 12 days, >5Y = 16 days
・MC: 1~2Y = 14 days, 3~4Y = 18 days, >5Y = 22 days
・Hardship Working Allowance (if you work at site >20 days/month): RM 500
・Car Fuel Allowance: RM 0.30 / km (for both commuting and business trip)
・Child Allowance: RM 100 / month (Maximum 2 children)
・Mobile Phone: Provided by company for business use
・Medical Fee (Max): RM 2,400 / year (covering 1 spouse and kids)
・Medical Checkup: 1 time / year
・Business Trip outside Klang Valley (within 100 km): RM 10 / day
・Domestic Business Trip (more than 100km): RM 20 / day
・Overseas Business Trip: RM 70 / day
・Bonus (Average 1 month payout / year)
・Welcome Lunch[ Terengganu ] Manufacturing ManagerID:60502
10,000 MYR ~ 12,000 MYRTerengganu工作内容
■ JOB OVERVIEWAs a Manufacturing Manager, you will lead large-scale, labor-intensive manufacturing operations to achieve high performance in safety, quality, delivery, cost, and people development.You will oversee multi-shift production operations, ensure operational stability, and drive continuous improvement in alignment with customer requirements and business objectives.■ RESPONSIBILITIESOverall• Lead end-to-end manufacturing operations including cutting, crimping, sub-assembly, final assembly, and inspection processes• Manage large workforce across multiple shifts, including operators, line leaders, and supervisors• Ensure achievement of production targets (daily, weekly, monthly) with effective manpower deployment• Drive operational discipline, standardization, and adherence to work practices• Optimize manpower utilization, attendance, and workforce flexibility (multi-skilling, skill matrix)• Drive productivity improvement (labor efficiency, output per hour, cycle time)• Control direct labor cost, overtime, absenteeism, and attrition• Lead line balancing, takt time improvement, and capacity optimization• Ensure compliance with quality standards (e.g. IATF/ISO) and customer requirements• Drive defect reduction, customer complaint prevention, and structured problem-solving initiatives• Promote strong shopfloor safety culture and zero-incident mindset• Manage manufacturing cost including labor, scrap, and consumables• Lead cost reduction and continuous improvement initiatives (Lean, Kaizen, 5S, Poka-Yoke)• Monitor KPIs and drive performance through structured review and escalation processes• Develop and coach supervisors and team leaders to improve capability and performance• Manage industrial relations issues in a labor-intensive environment• Collaborate with cross-functional teams (Engineering, PC&L, Quality, Maintenance, HR) to ensure smooth operationsEnvironment, Health & Safety (EHS)• Comply with company EHS policies and support site EHS objectives and targets• Ensure compliance with all safety rules, procedures, and legal requirements• Maintain a safe, clean, and environmentally responsible working environment• Identify, report, and follow up on unsafe conditions, unsafe acts, and hazards• Support risk assessments, incident investigations, and corrective actions• Promote safety awareness, safe behavior, and continuous EHS improvement
福利制度
・All-in Salary = RM 10,000 ~ RM 12,000 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 MonthsService Engineer (CNC - Electrical & Electronics)ID:60497
2,500 MYR ~ 3,000 MYRKlang工作内容
• Responsible for programming, installation, systems setup, testing• Provide maintenance and service of machines• Provide technical support to customers • Conduct product training, demonstration and technical advices to customers• Develop and maintain close relationship with customers, entertainment after work is necessary• Any ad-hoc tasks as assigned by Supervisor• Area coverage: whole Malaysia
福利制度
◆ Degree Holder Fresh Graduate = RM 3,000
◆ Diploma Holder Fresh Graduate = RM 2,800
== Benefits ==
◆ Annual Leave 8 days, increase 2 days every year. Max 16 days
◆ Company Phone (after probation)
◆ Company Car (after probation)
＊＊Allow personal use
＊＊Car maintenance expenses, car insurance cover by company
＊＊New car change in 4 years cycle
◆ Petrol and toll fully claimable (for client visit)
◆ Outstation transport and accommodation will be covered by client
◆ OT is paid according to law (1.5x~2x by hour)
◆ Meal allowance (during outstation) RM 40/day (or extra RM 40 if overnight)
◆ Performance bonus (averagely 4 months depending on personal and company performance)
** Year 2021: 6 months bonus
** Year 2022: 8 months bonus
◆ 1-3 weeks training in Japan (after probation, based on selection)
◆ Company T-shirts / Company Trip
◆ Group Hospitalization & Surgical, Group Personal Accident, MedicalService Engineer (Robot - Mechanical / Mechatronics)ID:59624
2,500 MYR ~ 3,000 MYRKlang工作内容
• Responsible for programming, installation, systems setup, testing• Provide maintenance and service of machines• Provide technical support to customers • Conduct product training, demonstration and technical advices to customers• Develop and maintain close relationship with customers, entertainment after work is necessary• Any ad-hoc tasks as assigned by Supervisor• Area coverage: whole Malaysia
福利制度
◆ Degree Holder Fresh Graduate = RM 3,000
◆ Diploma Holder Fresh Graduate = RM 2,800
== Benefits ==
◆ Annual Leave 8 days, increase 2 days every year. Max 16 days
◆ Company Phone (after probation)
◆ Company Car (after probation)
＊＊Allow personal use
＊＊Car maintenance expenses, car insurance cover by company
＊＊New car change in 4 years cycle
◆ Petrol and toll fully claimable (for client visit)
◆ Outstation transport and accommodation will be covered by client
◆ OT is paid according to law (1.5x~2x by hour)
◆ Meal allowance (during outstation) RM 40/day (or extra RM 40 if overnight)
◆ Performance bonus (averagely 4 months depending on personal and company performance)
** Year 2021: 6 months bonus
** Year 2022: 8 months bonus
◆ 1-3 weeks training in Japan (after probation, based on selection)
◆ Company T-shirts / Company Trip
◆ Group Hospitalization & Surgical, Group Personal Accident, MedicalSafety & Health Officer (SHO)ID:60707
5,000 MYR ~ 8,000 MYRPerai工作内容
Main Tasks / Responsibilities- Conduct regular workplace inspection on environmental, health and safety of workplace to detect non-conformance of safety regulations, unsafe act of workers, unsafe condition in the workplace, and to take immediate corrective action to rectify all non-compliances to reduce the incident rate.- To be innovated and provide solution on the improvement on EHS related matter.- Conduct accident, incident and near miss investigation and report to corporate and DOSH on timely manner.- Ensure all the hygiene monitoring such as LEV, Noise, CHRA and Chemical monitoring are done and completed on timely basis.- To interact with various authorities such as DOSH, DOE, BOMBA and other local or government authorities related to EHS.- To ensures that hazardous waste are collected, stored, labeled and disposed of according to Schedule Waste Regulation 2005.- To lead the team and ensure the waste management system are in compliance with DOE requirements.- To Prepare legal register.- To Maintain stock of First Aid Kits.- Maintain updated SDS.- PPE issue and recording and inspection.- Coordinate fire drill and ERT.- Carry out compliance obligation check.- To conduct site inspection for non-compliance of safety regulations, unsafe act of workers, unsafe condition in the workplace, and to take immediate corrective action to rectify all non-compliances.- To lead and manage the customers audit related to EHS requirements.- To conduct training and share knowledge to the organization to on EHS related matter.- Ensure all the regulated training such as noise, forklift, chemical and scheduled waste are conducted on timely manner.- Contribute to continuous improvement activities.To perform special task and project assigned by Superior from time to time.- Other duties assigned by supervisors or management from time to time.HR GA Responsibilities1) Office & Facility ManagementCoordinate and monitoring cleanliness, maintenance, and safety of the Hostel/office/factory/ for repairs, supplies, and servicesArrangement and check on hostel capacity and employee disciplineMonitoring company transport Bus performanceArrangement and monitoring security work performance and enhance on security rules and procedure2) Compliance & Legal SupportSupport in license renewals, permits, and auditsAssist in documentation for government reporting3) Organize and support any company event activities4) Accept the new job assignment by superior from time to time.
福利制度
- Socso
- Medical benefits – RM35.00 company bear Per visit
- Transportation ( depends on distance )
- Bonus once a year is 1 month
- Friday prayer 2hrs time off (12.30pm – 02:30pm)
- OT rate on Normal day – RM10.00 per hour & on rest day & Public Holiday RM12.00 per hour
1/ Annual Leave
< 2 years 12 days
> 2 years < 5 years 16 days
>5 years 20 days
2/ MC
( a )Less than 2 years
14 days per year
( b )2 years but less than 5 years
18 days per year
( c )5 years or more
22 days per yearFactory Manager (Johor)ID:60705
8,000 MYR ~ 10,000 MYRPontian工作内容
The RoleAs our Factory Manager, you will be the custodian of the end-to-end material lifecycle at our facility and the glue that brings our operations together. Moving beyond standard floor operations, you will take full ownership of the entire process—from the moment materials arrive at the factory, through physical processing and laboratory analysis, to final logistics. Just as importantly, you will be the unifying force that builds synergy across these diverse departments, ensuring that the team works as one cohesive unit to strictly meet all critical turnaround time targets.Key Responsibilities1. Factory & Processing Operations- Direct all daily factory operations, overseeing the intake, physical sorting, decanning, crushing, and milling of precious metal-bearing scrap materials.- Manage production schedules to ensure steady throughput, preventing bottlenecks on the factory floor and ensuring a continuous feed for subsequent stages.- Enforce strict inventory and material tracking controls to monitor mass balance and prevent any material loss during physical processing.2. Cross-Functional Coordination (Lab & Refining)- Work closely with the Laboratory team to ensure that milled and blended samples meet strict technical standards for grain size and homogeneity before assaying.- Coordinate seamlessly with the Refining team to streamline the hand-off of processed materials, aligning factory outputs with refining schedules and capacities.- Act as the primary operational link between material processing, laboratory feedback, and downstream refining execution to resolve any variance or workflow issues quickly.3. Maintenance, Logistics & Facility Management- Oversee warehouse logistics, incoming material reception, and the secure storage of high-value scrap and processed materials.- Supervise preventative maintenance programs for all heavy industrial machinery (e.g., shredders, ball mills, blending equipment) to ensure maximum equipment uptime.- Manage local operational budgets (OPEX) and factory floor resource allocation.4. Team Leadership & Regulatory Compliance- Lead, mentor, and build a disciplined factory workforce, including operators, supervisors, and warehouse staff, by setting clear operational KPIs.- Ensure the entire facility operates in strict compliance with Malaysia’s Department of Occupational Safety and Health (DOSH) standards and local municipal council regulations.- Coordinate closely with corporate functions to uphold company handbooks, workplace communication standards, and safety protocols on the floor.
福利制度
- Annual Leave
< 2 years : 8 days
2-5 years : 12 days
>5 years : 16 days
- Medical Leave
< 2 years : 14 days
2-5 years : 18 days
>5 years : 22 days
- Medical Claim up to RM 1500 yearly
- Performance Bonus
- Yearly IncrementSenior Automation Engineering Manager (PG)ID:59884
15,000 MYR ~ 20,000 MYRSimpang Ampat, Batu Kawan工作内容
Job SummaryThe Senior Automation Engineering Manager leads the Automation Engineering department, overseeing daily operations, budget and manpower planning, project execution, and team development. The role ensures compliance with OSHA and GMP standards, drives continuous improvement initiatives, and manages customer and internal coordination to define project requirements and SOW, while ensuring timely delivery of automation design projects.Job Responsibilities- Responsible for the daily management of the Automation engineering department, developing department budget and manpower plans.- Implement department's workflow and system, etc.- Lead initiatives, such as Kaizen events and 5S workplace organization, to eliminate waste and improve efficiency.- Conduct training and development for team members followed by certification to enhance the overall skills of the team.- Interface with customers to understand and interpret Project requirements, then work with customers and internal team to finalize SOW.- Be aware of Safety & Compliance: Enforce OSHA and GMP (Good Manufacturing Practices) standards to maintain a zero-incident culture and ensure product regulatory compliance.- Key Performance Indicators (Automation design KPIs).- Train and certify all engineers as per agreed to plan with CTO.- On-Time In-Full (OTIF): Rate of design projects delivered on the promised date and budget.- Finish project design activities within agreed to timeline and budget.- Project DFM generation and documentation.- Carry out detailed design reviews (3D/2D/BOM).- Review and approve the operation and maintenance manual of the equipment.- Provide technical support related to the equipment.- Manage & organize and file project materials.- Align with company objectives and follow the work arrangements.- Take work seriously and with full responsibility.- Be determined to challenge oneself and figure out work efficiency improvement options.- Help CTO develop Technology roadmap.
福利制度
- Phone allowance
- Optical / Dental = RM300
- Medical = RM500
- Annual Leave
- Compassionate Leave
- Marriage Leave
- Travel Allowance
