9 Jobs: Job Vacancies for QC/QA(Mechanical) Positions
QAQC & Production Management ExecutiveID:59695
6,000 MYR ~ 7,500 MYRKota Damansara/Petaling JayaJob Description
【Responsibilities】- Perform incoming inspection of raw materials, components, and products in accordance with quality standards and specifications- Conduct product evaluation, testing, and validation to ensure compliance with required performance criteriaIdentify, document, and report non-conforming materials or products- Coordinate with suppliers and internal teams to resolve quality issues and implement corrective actions- Support root cause analysis and contribute to continuous improvement initiatives- Maintain accurate inspection records, reports, and quality documentation- Review technical drawings, specifications, and quality requirements for inspection readiness- Collaborate with procurement, production, and engineering teams to ensure quality alignment- Assist in the development and improvement of inspection procedures and quality standards- Participate in audits and ensure compliance with internal and external quality systems- Monitor supplier quality performance and provide feedback for improvement【Memo】- After joining the company, you will be required to travel to our Singapore production site for approximately one month for training purposes. The duration may be extended depending on progress and business needs. This assignment will also involve supporting the transfer of technical know-how from the Singapore production site to Malaysia.- The location of the production site in Malaysia has not yet been finalized. Areas in or around Kuala Lumpur are currently being considered as potential candidates.- Once the production site location is confirmed, you will be assigned there as your primary workplace and will support the site setup and launch activities. Until then, your base will be the Malaysia Kuala Lumpur office, where you will undergo office-based training and may also travel to affiliated companies for additional training, including the assignment mentioned above. In addition to Singapore, business trips to Japan may also be required.- In cases where subcontracting work is carried out in Malacca, you will be expected to provide on-site support through short-term business trips, including possible day trips.
Benefit
• Car Allowance : RM600 (for maintenance purpose)
*The cost for client visiting such as toll and carpark is claimable based on Touch & Go
• Medical & Dental Claim
• Business trip allowance
• Annual Wage Supplement (AWS)
• Performance Bonus (depends on the company performance, twice a year and total 1-2 month as average)
• AL: starts from 12 days and up to 16 days
• Company Trip (subject to the company performance)QA EngineerID:59533
5,000 MYR ~ 7,000 MYRSimpang AmpatJob Description
Job Overview: The successful candidate for this position will be responsible for day-to-day quality activities, support Production & Engineering on the assurance of quality processes and products compliance with the Standard of Quality Management System and customer requirements.Job Responsibilities:• Responsible for projects related to product and process quality to ensure quality products and total customer satisfaction.• Analyze data to understand a problem and develop solutions for quality improvement projects.• Be the key person to interface with customers / suppliers / internal team related to quality issues and failure incidences.• Driving issues for root cause(s), corrective action, and monitoring for effectiveness.• Lead the internal team and prepare customer / Internal 8D report whenever there is quality issue.• Involve in and support all the relevant quality of new part approval project and transfer projects.• Support and assist in customer and third-party audit.• To perform internal audit and supplier audit when necessary.• To establish and maintain quality documents such as SOP, WI, SIP, Control Plan and etc.• Conduct training of quality related topics/ISO standard to QA Inspectors and internal team.• Oversee quality inspection and testing of incoming, in process and outgoing product to confirm products quality meet the specification.• To manage non-conformance incoming parts and goods tin accordance with quality management system.• Any other tasks deemed necessary and assigned by superior.
Benefit
• 13th month salary (August)
• Yearly performance bonus (January)
• Annual increment subject to company and employee performance (July)
• Public Holidays – 18 days per year
• Annual leave
- < 2 years - 12 days
- 2 to 5 years – 14 days
- > 5 years - 16 days
• Medical & Health benefits:
- Sick leave (14 to 22 days per annum)
- Clinical expenses at company panel (Red Alert) cover employee only limit to RM600 per year, RM60 per visit.
- Group Hospitalization & Surgical insurance benefits for employees only.
- Group Personal Accident Insurance – RM50,000 for Executive
- Group Term Life Insurance – RM50,000 for Executive
- Prolong illness benefit.
- Dental / Vision / Medical Check-up – RM200 per year
• Birthday leave – 1 day upon confirmation
• Compassionate leave 1 – 3 working days[ Rawang ] Customer Service TechnicianID:59042
2,000 MYR ~ 3,000 MYRRawangJob Description
Support the Customer Service Engineer at the Customer Production Line Ensure customer line is supported at all times. Support Customer Service Engineer to resolve any issues at the customer end in a timely manner. To feedback to Customer Service Engineer accurate & timely information on all issues at the customer plant.Support all change implementation To support Customer Service Engineer for SQE to evaluate changes made by supplier and carry out fitment at the customer end.Follow up on Engineering Changes & Permits Support Customer Service Engineer for assurance engineering changes & permits are implemented in accordance to accepted procedures. Monitor the cut off for changes is done correctly and effectively.Support Customer Service Engineer in Monitor Quality System Involve in all rework or reprocessing at the Customer plant Control of non-conforming products.Ensure that material respect is followed at all times. Assist in the identification, development and implementation of new work instructions.Problem Solving Participate in problem solving teams.
Benefit
・All-in Salary = RM 2,000 ~ RM 3,000 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 MonthsQA ExecutiveID:59253
2,600 MYR ~ 4,100 MYRPeraiJob Description
< JOB SUMMARY >The QA Executive will be responsible for overseeing and ensuring the quality, completeness, and accuracy of job listings obtained through automated web scraping.This role is critical in maintaining high data standards across the platform by regularly auditing job feeds, validating extracted fields, identifying scraping anomalies, and coordinating with the tech and data teams to address and resolve issues.< KEY RESPONSIBILITIES >・Perform routine quality inspections on raw materials, in-process products, and finished goods.・Ensure compliance with company standards and customer specifications.・Document and report inspection results accurately and timely.・Identify and record any product defects or non-conformities and report to immediate superior.・Assist in maintaining calibration of QC equipment.・Maintain clean and organized inspection records and workspaces.・Support the immediate superior in daily operations.
Benefit
・Basic Salary = RM 2,600 ~ RM 4,100
・AL = 12d, MC = 14d (increase proportionally with service year)
・Birthday Leave
・Transportation Allowance
・Phone Allowance
・Birthday Allowance
・Insurance: GPA, GTL, GHS
・Medical Claim, Optical Claim, Dental Claim
・Contractual Bonus (13th Month Bonus)
・Performance Bonus: Average 2 ~ 3 months
・Company Activities: Festive Event, Company Trip, Annual DinnerHeat Treatment Manager (Klin Drying & Thermal Modification)ID:59072
10,000 MYR ~ 12,000 MYRPahangJob Description
<Key Responsibilities>1. Stacking Standards & Material Preparation • Develop and enforce correct stacking methods for different species and dimensions • Ensure even sticker spacing, airflow paths, board alignment, and load stability• Train stacking teams to minimize: warping, twisting, surface checking, inconsistent drying• Inspect all loads before they enter the kilns/thermal chambers 2. Heat Treatment Cycle Management (KD & Thermal)• Plan, run, and optimize heat-treatment cycles for all species• Ensure accurate control of: temperature ramps, humidity schedules, airflow • Adjust cycles based on board thickness, MC content, grain orientation, and defects• Monitor and analyze live data from sensors and probes• Maintain accurate documentation for every cycle 3. Defect Prevention & Quality Control During Treatment• Conduct QC checkpoints:- Pre-loading moisture content- Mid-cycle sampling- Final MC checks- Visual grading post-treatment• Reduce reject rates caused by:- Warping/bending- Inconsistent MC- Honeycombing- Internal/surface checks- Color inconsistency• Perform root-cause analysis and implement corrective action4. Machine, Kiln & Equipment Reliability • Oversee daily inspection and function checks for:- Kilns- Thermal modification chambers- Fans/blowers- Sensors - Moisture meters • Work closely with engineering to minimize downtime from:- Faulty sensors- Boiler pressure drops- Air leaks- Fan failures- Temperature inconsistencies• Implement preventive maintenance schedule (weekly/monthly)• Ensure calibration of all instruments and controls 5. Continuous Improvement & Yield Optimization • Analyze data to improve recovery %, reduce cycle duration, and lower energy usage• Optimize: - Airflow patterns- Chamber loading capacity- Energy consumption • Lead small trials to improve: - Thermal modification performance - Deeper colour penetration - Durability performance • Set and tract KPIS:- Net Recovery Rate- Reject Rate- Cycle Efficiency - Cost/M(3) Treated 6. Training and Team Competency• Train kiln/thermal operators in proper control, safety, and QC• Build strong discipline for SOPs and documentation• Improve operator understanding of wood behaviour during drying
Benefit
Salary range: ~RM10,000 - RM12,000
<Leaves>
AL: Starting from 16 days
SL: 14 / 18 / 22 days
<Other benefits>
• GPA 24x7 coverage
• GHS coverage up to RM50K/per annum
• Performance/KPI linked bonus
• Production output incentives
• Medical claims for GP treatmentQC Manager (Printing)ID:58989
6,000 MYR ~ 8,000 MYRPasir GudangJob Description
We are seeking a highly experienced QC Incoming Manager with a strong background in printing processes and excellent color vision to join our team.Job Responsibilities:- Manage and supervise incoming quality control inspection for raw materials and printed components- Ensure all incoming materials meet printing quality standards, including color accuracy and consistency- Analyze defects related to printing, color variation, ink, and materials- Work closely with suppliers, production, and QC teams to resolve quality issues- Develop and improve QC incoming procedures and inspection standards- Prepare quality reports and support audits when required- Able to work independently and lead QC activities effectively
Benefit
- Bonus (Average 2 months Bonus)
- AL starting from 8 days
- MC starting from 14 days
- Transportation allowance: Claim Basis
- Free parking
- Hospitalization Leave
- Group Personal Accident InsuranceJunior Manufacturing Engineer (Fresh Grads OK) (Johor)ID:58355
3,000 MYR ~ 5,500 MYRPasir GudangJob Description
• Supervising the manufacturing processes, ensuring quality work is done in a safe, efficient manner.• Liaising with other engineers to develop plans that improve production, costs, and labor required.• Diagnosing problems in the production line and providing recommendations and training.• Establishing safety procedures and protocols that take the workers' well-being into account, and that also minimize the carbon footprint.• Keeping abreast of advancements in engineering and production, and sharing knowledge with co-workers.• Identifying, documenting, and reporting unsafe practices.• Analyzing all facets of production and making recommendations for improvement.
Benefit
- Bonus (Average 2 months Bonus)
- AL starting from 8 days
- MC starting from 14 days
- Transportation allowance: Claim Basis
- Free parking
- Hospitalization Leave
- Group Personal Accident InsuranceQC Assistant Manager/QC Engineer (Japanese Speaker) (Johor)ID:58155
5,000 MYR ~ 9,000 MYRPasir GudangJob Description
• Understand customer needs and requirements to develop effective quality control processes• Devise and review specifications for products or processes• Supervise downline and other staff and provide guidance and feedback• Oversee all product development procedures to identify deviations from quality standards • Inspect final output and compare properties to requirements• Approve the right products or reject defectives• Keep accurate documentation and perform statistical analysis• Solicit feedback from customers to assess whether their requirements are met• Submit detailed reports to appropriate HOD• Be on the lookout for opportunities for improvement and develop new efficient procedures• Oversee and handle Store area including support staffs
Benefit
- Bonus (Average 2 months Bonus)
- AL starting from 8 days
- MC starting from 14 days
- Transportation allowance: Claim Basis
- Free parking
- Hospitalization Leave
- Group Personal Accident Insurance【Japanese Speakers】QA Enginner/ManagerID:57812
6,000 MYR ~ 7,000 MYRSeri KembanganJob Description
**Job Title:**Japanese Quality Assurance Engineer – Automotive & Electronics Die Casting Products**Company Overview:**Our company is one of the largest Japanese manufacturers in Malaysia, with over 700 employees. Specializing in aluminum die-casting components for the automotive and electronics industries, we are now seeking a Japanese Quality Assurance Engineer to support our continued business expansion. Our operations are stable and resilient to economic fluctuations, thanks to our broad customer base across Malaysia and international markets.We supply high-precision aluminum die-cast components not only for conventional automobiles but also for eco and electric vehicles—sectors poised for further growth.**Products:*** Automotive and motorcycle parts* Computer components* Hydraulic equipment parts* General industrial machinery components(*Note: Aluminum die casting is a technique in which molten metal is injected into a mold to produce precise components.*)**Key Responsibilities:***Internal Quality Assurance:** Manage and monitor quality across all production stages* Implement and lead quality improvement initiatives* Establish and maintain internal quality standards* Conduct on-site inspections and recommend manufacturing improvements when needed*Client-Facing Activities:** Respond to customer inquiries and requests regarding product quality* Investigate issues, coordinate with internal teams, and formulate appropriate countermeasures* Draft related documentation such as manuals when necessary* Participate in discussions on quality standards and specifications with clients**Work Environment:*** Office-based work with regular access to adjacent production facilities* Uniform required during working hours* In-house cafeteria available (meals at lower-than-city prices)**Location:**3377, Taman Industri Selesa Jaya, Balakong, Taman Industri Selesa Jaya, 43300 Seri Kembangan, Selangor, Malaysia**Career Opportunity:**The company employs approximately 20 Japanese professionals, providing strong potential for advancement within the organization.**Business Travel:**Required (based on project needs)
Benefit
**Leave**
* Paid Annual Leave: Yes (increases with years of service)
* Sick Leave: 14 days per year
**Health & Insurance**
* Health/Medical Insurance: Coverage up to RM300 per year (with specific terms and conditions)
* No company-provided health checkups
* Workers’ compensation insurance is provided
**Additional Information**
* Calendar follows Malaysian public holidays
* Company mobile phone provided
* On-site cafeteria available for lunch
* Housing options: Company dormitory available / Housing allowance provided. For details, please refer to the “in-house sharing” section
* Company car available after 3 months of employment, with fuel card provided
* Overtime: Subject to workload
