11 Jobs: Job Vacancies for Process Engineer(Mechanical) Positions
[ Terengganu ] Advanced Manufacturing Engineering (AME) EngineerID:59043
3,000 MYR ~ 4,500 MYRTerengganuJob Description
< ROLE OVERVIEW >To lead the development and implementation of advanced manufacturing technologies and processes, ensuring innovation, efficiency, and scalability for new product introductions and continuous improvement initiatives.< RESPONSIBILITIES AND DUTIES >Advanced Process Development Design and implement cutting-edge manufacturing processes for new products. Evaluate and integrate automation, robotics, and Industry 4.0 solutions.Technology Assessment & Implementation Research emerging manufacturing technologies and assess feasibility. Drive adoption of advanced tools such as additive manufacturing, smart sensors, and digital twins.New Product Introduction (NPI) Collaborate with design and R&D teams to ensure manufacturability. Develop process flow, tooling, and equipment for new product launches.Continuous Improvement Lead projects to enhance productivity, reduce cycle time, and improve quality. Apply Lean, Six Sigma, and advanced analytics for process optimization.Cost & Efficiency Conduct ROI analysis for new technologies and equipment. Optimize resource utilization and reduce operational costs.Compliance & Safety Ensure all advanced processes meet safety, environmental, and regulatory standards
Benefit
・All-in Salary = RM 3,000 ~ RM 4,500 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 MonthsSr. Engineer/Principal Engineer – Process Engineering & DevelopmentID:58933
4,500 MYR ~ 7,000 MYRBayan LepasJob Description
- Responsible for New Product Introduction, process transfer, qualification of new production equipment/machine and conducting First Article Report- Conduct research and development materials projects, as well as design experiments for investigation into root causes of materials issues and resolve the issues.- To provide process support for metal fabrication and consolidation by Vacuum Induction Melting (VIM), heat treatment, machining and all their related processes.- Responsible for input required to prepare process related documents such as, but not limited to process travellers, specific work instructions, process procedures & specifications and actual process performance.- Investigate process and quality problems and implement immediate short term fixes and long term solutions.- Identify, define and implement other process improvement projects, including but not limited to quality improvements, cost reductions, capacity increases and material handling equipment and methods.- Maintain process instructions, procedures and documentation.- Interface with customer and engineering support group in headquarter with regard to product changes and evaluate impact to manufacturing operation.- Participate in meeting with customer and other supporting group.- Responsible to design and buy-off new equipment/ production tools for VIM process.- Responsible as project management leader to oversee the overall project management of New Product Introduction (NPI), generate milestone Gantt chart, identify risk of project and maintenance of existing program to meet customer’s requirements and expectations.- Perform other related tasks as needed.
Benefit
- Annual Leave:
Less than 2 years – 12 days
2-5 years – 16 days
More than 5 years – 20 days
- Medical Leave
- Dental & Optical claim – RM600 per year
- Specialist treatment claim
- Performance Bonus
- OT claim
- Medical coverage will be under company panel doctor and extended to dependants for married staffs.
- Term Life Insurance for staffs and Hospitalization Insurance scheme
extended to dependants for married staffs.Engineer – Process Engineering & DevelopmentID:58932
3,500 MYR ~ 4,500 MYRBayan LepasJob Description
- Responsible for New Product Introduction, process transfer, qualification of new production equipment/machine and conducting First Article Report- Conduct research and development materials projects, as well as design experiments for investigation into root causes of materials issues and resolve the issues.- To provide process support for metal fabrication and consolidation by Vacuum Induction Melting (VIM), heat treatment, machining and all their related processes.- Responsible for input required to prepare process related documents such as, but not limited to process travellers, specific work instructions, process procedures & specifications and actual process performance.- Investigate process and quality problems and implement immediate short term fixes and long term solutions.- Identify, define and implement other process improvement projects, including but not limited to quality improvements, cost reductions, capacity increases and material handling equipment and methods.- Maintain process instructions, procedures and documentation.- Interface with customer and engineering support group in headquarter with regard to product changes and evaluate impact to manufacturing operation.- Participate in meeting with customer and other supporting group.- Responsible to design and buy-off new equipment/ production tools for VIM process.- Responsible as project management leader to oversee the overall project management of New Product Introduction (NPI), generate milestone Gantt chart, identify risk of project and maintenance of existing program to meet customer’s requirements and expectations.- Perform other related tasks as needed.
Benefit
- Annual Leave:
Less than 2 years – 12 days
2-5 years – 16 days
More than 5 years – 20 days
- Medical Leave
- Dental & Optical claim – RM600 per year
- Specialist treatment claim
- Performance Bonus
- OT claim
- Medical coverage will be under company panel doctor and extended to dependants for married staffs.
- Term Life Insurance for staffs and Hospitalization Insurance scheme
extended to dependants for married staffs.Converting Process EngineerID:58689
4,000 MYR ~ 7,000 MYRSimpang Ampat, Bukit MinyakJob Description
- Conduct feasibility assessment and validation for new product processes, analyzing technical viability, production operability, and cost-effectiveness to ensure alignment with customer requirements and production capabilities.- Develop and maintain process documentation, including Standard Operating Procedures (SOPs), Process Specifications (PS), and work instructions, to standardize production workflows and ensure consistency in operations.- Verify the accuracy and compliance of tooling drawings, die-cut part assembly diagrams, and screen printing process parameters, ensuring they meet design standards and can be smoothly applied in actual production.- Track and resolve technical issues during new product testing (e.g., die-cut part assembly misalignment, screen printing ink adhesion defects), collaborating with R&D and Quality teams to implement corrective and preventive actions.- Evaluate new product test results, judge product compliance with standards, summarize improvement directions, and timely feedback test outcomes to cross-functional teams (R&D, Production, Sales) for process optimization.- Organize and archive new product test documents (e.g., test reports, measurement data), coordinate the submission of measurement samples, and track sample testing progress to ensure complete and traceable records.- Assist the Production Department in analyzing technical problems of mass-produced products (e.g., low yield, inconsistent process parameters), providing process improvement solutions to enhance production efficiency and product quality.- Identify opportunities to reduce test and production costs, such as optimizing screen printing ink usage, improving die-cut part material utilization, or simplifying redundant process steps.- Lead the development of new processes (focusing on die-cut part assembly and screen printing), researching advanced technologies, adjusting process parameters, and establishing quality control standards to expand production capacity and product scope.- Support the R&D Department in related testing work, including participating in test plan formulation, assisting in test setup, and providing professional process advice for new product design.
Benefit
- Annual Leave:
0-2 years: 16 days
2-5 years: 20 days
5 years above: 23 days
- Medical Leave
0-2 years: 14 days
2-5 years: 18 days
5 years above: 22 days
- Company Insurance
- Medical Claim: RM 1,500 / year
- 13 months Bonus (December)
- Performance Bonus (before CNY)
- Transport Allowance: RM10/day
- Phone & Internet Allowance: RM100
- OT Claims
- Mileage: RM 0.80 / kmMolding Engineer (Fresh Grads OK)ID:58530
3,860 MYR ~ 6,360 MYRBukit MinyakJob Description
• Responsible follow up and establish new standard for process stabilizing and optimization (procedure, control plan, SOP, FMEA, WI, form)• Repalletized process control• Responsible for Process yield improvement• Compile and analyses yield report• Responsible daily monitor and control production waste /scrap and generate weekly report• Follow up and trouble shooting together with line technicians, if found any abnormality. Provide problem solving (fine tune problem and develop the solution)• Respond to internal and external audits, actions follow- up till closure• Resin stock management• Assist in establish production process control procedure• Assist in optimize production / process running• Work with QA on product quality related matter (especially customer feedback)• To support internal training and training manual preparation• WI and OPL preparation• Handle other tasks and duties as and when requested by Superior
Benefit
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Medical RM600/year & Dental RM300/year
- Toll claimable (Candidate from Island only)
- Transport Allowance RM300
- Internet Allowance RM60
- Individual bonus - 1month fixed
- Increment every year (July) -Rate based on performanceProcess Engineer / Product EngineerID:58524
3,500 MYR ~ 7,000 MYRPeraiJob Description
1. Process Optimization & Improvement- Analyze existing roller chain production processes (stamping, heat treatment, assembly, etc.)- Identify and implement improvements to increase efficiency, reduce waste, and maintain quality.- Conduct time and motion studies, cycle time analysis, and cost reduction initiatives.2. New Process Development- Develop and validate new manufacturing processes or upgrades.- Support new product introduction (NPI) by designing scalable and efficient production methods.3. Tooling and Equipment Management- Specify, evaluate, and commission jigs, fixtures, dies, and automated equipment.- Troubleshoot machinery/process issues and work with maintenance to ensure uptime.4. Quality and Compliance- Work closely with QA/QC to ensure processes meet ISO/IATF 16949, and customer-specific standards.- Lead root cause analysis and implement corrective actions for process-related issues.5. Documentation and Standardization- Prepare and update work instructions, SOPs, PFMEA, process flow charts, and control plans.- Maintain accurate documentation for audits and production traceability.6. Cross-functional Support- Collaborate with Design, Maintenance, and Production teams for continuous improvements.- Train operators and technicians on new processes or improvements.
Benefit
- Annul Leave 10 days onwards
- Medical Leave 14 days onwards
- Hospitalization leave 60 days
- Insurance Coverage
- Panel Clinic
- Performance Bonus
- Yearly Increment【Japanese Speaker】Production EngineerID:58233
3,000 MYR ~ 4,500 MYRShah AlamJob Description
1) Plan & execute validation for process change and new product (New Product Transfer)2) Plan & execute product sample request by customers or Japanese members3) Handling of new product documentation & revision of related documents4) Make improvement to process through introduction of new/modification of tools/machine (Automation and Gorikaproject)5) Assist production & QA to analysis & solve production problems (Claims and abnormality improvement project)6) Attend meeting & exchange email with Japanese members7) Assist supervisor in managing New Product Transfer groupwork progress
Benefit
Basic Salary: RM 3,000 - 4,500
- Language allowance
- Transportation allowance
- AL/MC
- Bonus (subject to the company performance)NPI Engineer (Sheet Metal)ID:57794
6,000 MYR ~ 10,000 MYRNibong TebalJob Description
- Lead and manage NPI projects from concept through production readiness.- Work with design, quality, production, procurement, and supply chain teams to ensure manufacturability and seamless product launch.- Interpret and review technical drawings, BOMs and customer specifications.- Support DFM (Design for Manufacturing) and provide feedback to design teams for sheet metal components and assemblies.- Develop and maintain project timelines, track deliverables, and report status to stakeholders.- Coordinate prototyping, testing, and validation of new products.- Define and document work instructions, routing sheets, and process flow for new products.- Support the transition from prototype to production, including tooling, fixtures, and machine setup.- Identify and mitigate risks throughout the NPI process.- Ensure compliance with quality standards and customer requirements.- Maintain close communication with customers and internal teams to manage change requests and feedback.- Support cost estimation and quoting activities for new projects.
Benefit
- Annual Leave 10 days
- Medical Leave 14 days
- Meal Allowance
- Yearly Bonus
- Salary Increment
- Medical Benefit and Insurance
- Maternity and Paternity Leave【Japanese Speaker】 Sales & Marketing EngineerID:57789
3,500 MYR ~ 4,500 MYRMalaccaJob Description
- Identify new business opportunities and manage customer relationships to drive sales growth.- Deliver product presentations (optical and electronic products), prepare quotations, and propose offer sheets tailored to customer needs.- Collaborate closely with internal teams (Engineering, Production, Shipping, etc.) to ensure timely delivery and effective customer support.- Schedule and conduct visits to potential customers; follow up on submitted quotations through direct communication or personal visits.- Monitor market trends, customer direction, and competitor activities to support strategic planning.- Maintain accurate sales records, report customer activity, and input monthly sales forecasts for glass consumption.- Participate in industry exhibitions and events to identify potential business opportunities and expand market presence.- Demonstrate the ability to work independently and complete assigned tasks with minimal supervision.-
Benefit
- EPF, SOCSO, EIS provided
- AL: 14 days
- MC: 14 days
- Transportation: fixed/ Calculate by km
- Free parking
- Bonus: 3 months (average)
- Increment: 3-7% depends on the performance【Japanese Speaker】 Sales & Marketing EngineerID:57790
3,500 MYR ~ 4,500 MYRMalaccaJob Description
- Ensure control plans and related documentation are effectively implemented and maintained- Monitor and report on quality-related Key Performance Indicators (KPIs)- Conduct root cause analysis and implement permanent corrective and preventive actions for product quality issues- Manage all quality-related issues within the optical glass production environment- Verify the effectiveness of corrective actions taken- Support Head of Department (HOD) in resolving product quality issues- Work independently to determine the approach and execution of assigned tasks- Lead and participate in continuous improvement initiatives related to process flow and quality enhancement- Review, improve, and control existing production process flows to increase efficiency and consistency- Develop and document new production process flows for new products or upgraded production setups
Benefit
- EPF, SOCSO, EIS provided
- AL: 14 days
- MC: 14 days
- Transportation: fixed/ Calculate by km
- Free parking
- Bonus: 3 months (average)
- Increment: 3-7% depends on the performance
