26 Jobs for Process Engineer(Mechanical) found
Process Engineer / Product Engineer (Fresh Grads OK)ID:58142
3,000 MYR ~ 5,000 MYRPerai工作内容
1. Process Optimization & Improvement- Analyze existing roller chain production processes (stamping, heat treatment, assembly, etc.)- Identify and implement improvements to increase efficiency, reduce waste, and maintain quality.- Conduct time and motion studies, cycle time analysis, and cost reduction initiatives.2. New Process Development- Develop and validate new manufacturing processes or upgrades.- Support new product introduction (NPI) by designing scalable and efficient production methods.3. Tooling and Equipment Management- Specify, evaluate, and commission jigs, fixtures, dies, and automated equipment.- Troubleshoot machinery/process issues and work with maintenance to ensure uptime.4. Quality and Compliance- Work closely with QA/QC to ensure processes meet ISO/IATF 16949, and customer-specific standards.- Lead root cause analysis and implement corrective actions for process-related issues.5. Documentation and Standardization- Prepare and update work instructions, SOPs, PFMEA, process flow charts, and control plans.- Maintain accurate documentation for audits and production traceability.6. Cross-functional Support- Collaborate with Design, Maintenance, and Production teams for continuous improvements.- Train operators and technicians on new processes or improvements.
福利制度
- Annul Leave 10 days onwards
- Medical Leave 14 days onwards
- Hospitalization leave 60 days
- Insurance Coverage
- Panel Clinic
- Performance Bonus
- Yearly IncrementMolding Engineer (Fresh Grads OK)ID:58143
3,860 MYR ~ 6,360 MYRBukit Minyak工作内容
• Responsible follow up and establish new standard for process stabilizing and optimization (procedure, control plan, SOP, FMEA, WI, form)• Repalletized process control• Responsible for Process yield improvement• Compile and analyses yield report• Responsible daily monitor and control production waste /scrap and generate weekly report• Follow up and trouble shooting together with line technicians, if found any abnormality. Provide problem solving (fine tune problem and develop the solution)• Respond to internal and external audits, actions follow- up till closure• Resin stock management• Assist in establish production process control procedure• Assist in optimize production / process running• Work with QA on product quality related matter (especially customer feedback)• To support internal training and training manual preparation• WI and OPL preparation• Handle other tasks and duties as and when requested by Superior
福利制度
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Medical RM600/year & Dental RM300/year
- Toll claimable (Candidate from Island only)
- Transport Allowance RM300
- Internet Allowance RM60
- Individual bonus - 1month fixed
- Increment every year (July) -Rate based on performanceProduction Engineer ID:58130
3,000 MYR ~ 4,500 MYRPerai工作内容
. Prepare drawings based on given specifications and calculations created by engineers for manufacture, fabrication, maintenance, or repair of the product and structure.2. Design plans using computer-aided design and drafting software. Help design products with engineering and manufacturing techniques. Reversed engineering based on prototype or sample given and convert into a technical drawing.3. To supervise a team of engineers/skill workers/sub-contractors by managing tasks to achieve project completion date while aware of maintaining a safe and clean working environment.4. To estimate total required material for specific thickness & length from drawings & manage cutting layout with optimum use of material/plates. Confirms system and product capabilities by designing feasibility and testing methods; testing properties.5. Assures system and product quality by designing testing methods; testing finished - product and system capabilities; confirming fabrication, assembly, and installation processes6. Develops manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components. Prepares product reports by collecting, analyzing, and summarizing information and trends.7. Coordinate between production and painter to achieve delivery schedule. Contributes to team effort by accomplishing related results as needed.8. Control and submit design appraisal to maintain the validity.9. To perform other ad-hoc duties and responsibilities that may be needed or assigned by superior from time to time10. Promote ISO 9001, other relevant quality, product standard and certification maintained by Company.
福利制度
- Transport Allowances RM150
- AL 14 days
- Bonus Performances depends on company performanceProduction EngineerID:58083
3,500 MYR ~ 4,500 MYRBayan Lepas工作内容
- Analyze production issue, troubleshooting & implementation of preventive issue. Monitoring effectiveness of action.- Conduct manufacturing process studies, production performance & workflow analysis.- Address necessary process improvement with cost effective way to improve production throughput including designing automated & maintaining production tools without compromising product quality.- Ensure compliance with safety, environmental, and regulatory requirements.- Support capital investment projects, including equipment selection and commissioning.- Driving process automation: Evaluate & implement of automation/digitalization solution to enhance throughput, consistency & worker safety.
福利制度
- AL : 14 days, max : 20 days
- Transport allowance - RM100
- Meal allowance: RM3/day
- Yearly increment
- 2 times bonus every year
- Mileage claim RM0.55/km
- Dental claim RM100/month
- Panel clinicTooling EngineerID:58094
4,000 MYR ~ 6,000 MYRSimpang Ampat, Bukit Minyak工作内容
- Evaluate customer part designs and prepare the DFM documents. - Develop injection mould tools in accordance with part design requirements.- Evaluate tool designs for manufacturability, functionality, longevity and prepare the DFM documents. - Coordinate with suppliers and toolmakers for new tooling and tool modifications.- Oversee tool trials and validations, analyze results, and implement necessary changes.- Support root cause analysis and resolution of tooling-related issues.- Develop and maintain preventative maintenance schedules for tools.- Ensure compliance with safety, quality, and regulatory standards.- Optimize tooling for cycle time reduction, durability, and ease of maintenance.- Document all tooling activities, changes, and maintenance records.- Provide technical support during production start-up and troubleshooting phases.
福利制度
- Annual Leave:
0-2 years: 16 days
2-5 years: 20 days
5 years above: 23 days
- Medical Leave
0-2 years: 14 days
2-5 years: 18 days
5 years above: 22 days
- Company Insurance
- Medical Claim: RM 1,500 / year
- 13 months Bonus (December)
- Performance Bonus (before CNY)
- Transport Allowance: RM10/day
- Phone & Internet Allowance: RM100
- OT Claims
- Mileage: RM 0.80 / kmMolding EngineerID:58093
4,000 MYR ~ 6,000 MYRSimpang Ampat, Bukit Minyak工作内容
- Develop, document, and optimize injection moulding processes for new and existing tools.- Establish and maintain robust process parameters to ensure part consistency, cycle time efficiency, and quality compliance.- Analyze and troubleshoot moulding issues such as flash, short shots, sink marks, warpage, and dimensional inaccuracies.- Collaborate with tooling, quality, and production teams on mould trials, new tool validations (IQ/OQ/PQ), and DOE studies.- Monitor equipment performance and recommend improvements or upgrades to enhance productivity and reduce downtime.- Lead root cause investigations and implement corrective actions for non- conformances and process deviations.- Support preventive maintenance efforts for moulds and machines to ensure reliable operation.- Assist in training production staff and process technicians on best practices and new processes.- Identify opportunities for automation, cost reduction, and waste elimination within the moulding process.- Ensure all operations comply with health, safety, and environmental regulations, as well as ISO/quality standards.
福利制度
- Annual Leave:
0-2 years: 16 days
2-5 years: 20 days
5 years above: 23 days
- Medical Leave
0-2 years: 14 days
2-5 years: 18 days
5 years above: 22 days
- Company Insurance
- Medical Claim: RM 1,500 / year
- 13 months Bonus (December)
- Performance Bonus (before CNY)
- Transport Allowance: RM10/day
- Phone & Internet Allowance: RM100
- OT Claims
- Mileage: RM 0.80 / kmNPI Project EngineerID:57972
4,360 MYR ~ 6,360 MYRBukit Minyak工作内容
The Project Engineer in NPI acts as the technical coordinator who ensures product and process readiness, supports smooth pilot builds, and drives timely issue closure — so that new/transfer products launch into mass production successfully and on schedule.Key Responsibilities:- Plan NPI/transfer project by defining deliverables, milestones, actions and timelines.- Coordinate with cross-functional teams (Design, Manufacturing Engineering, Quality, Procurement, Supply Chain) to track project status and resolve issues.- Prepare and update project status reports, dashboards, and presentations for management, mostly on weekly basis.- Highlight risks, roadblocks, and escalate critical issues to manager.- Document lessons learned and propose continuous improvement initiatives for future NPI projects.- Perform purchasing for tool & component and delivery planning.- Filling for RTP (Release to Production) for project closure.
福利制度
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performanceManufacturing Engineer (NPI)ID:57971
4,360 MYR ~ 6,360 MYRBukit Minyak工作内容
The Manufacturing Engineer (NPI) is responsible for defining, developing, and validating manufacturing processes to successfully introduce new/transfer products into mass production. This role ensures processes are robust, efficient, and compliant with quality requirements by working closely with cross-functional teams from product design to production ramp-up.Key Responsibilities:1. Feasibility & manufacturability support- Lead DFM (Design for Manufacturing) activities.- Participate in drawing and design reviews to provide feedback on manufacturability.- Evaluate and confirm inspection feasibility; define required measurement tools and methods.2. Process planning & definition- Define and document end-to-end process flows for new products.- Identify and specify necessary equipment, tooling, jigs, and fixtures.- Set and validate process cycle time requirements to meet capacity targets.3. Process documentation & systems- Create Process Flow, Control Plan, FMEA and Work Instructions.- Ensure process documentation is approved and ready before pilot builds.- Revise/update process documentation after pilot build with lesson learnt.- Create and maintain process routings and BOM data in ERP systems (e.g., AX).4. Pilot build & line validation- Support pilot, pre-production, and qualification builds in production floor.- Validate actual process cycle time, study gap against planned requirements.- Validate process stability and capability to achieve required first pass yield.- Analyze build data to identify process gaps or failure modes.- Lead root cause analysis and implement corrective actions.- Perform drop test to validate packaging design.
福利制度
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performanceProcess Engineer (Fresh Grads OK)ID:57970
3,860 MYR ~ 5,360 MYRBukit Minyak工作内容
- Developing, optimising and improving manufacturing processes to enhance productivity, quality and safety.- Identifying and implementing process improvements to reduce costs, minimise waste and increase efficiency- Collaborating with cross-functional teams to ensure smooth integration of new processes, technologies and equipment.- Monitoring and analysing process data, identifying trends and proposing solutions for process improvement continuously- Performing process capability studies, statistical analysis and data-driven decision-making t achieve operational excellence and meet production targets- Maintain procedures, control plan and record- Handle customer audit- Support quality team in any customer feedback
福利制度
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performanceProject Management Senior Executive/AM ID:57926
8,000 MYR ~ 12,000 MYRBayan Lepas工作内容
• Collaborate with project functional managers and teams to develop comprehensive project plans, outlining tasks, timelines, and resource allocation.• Act as a contact window between internal & external stakeholders to ensure clear and consistent communication throughout the project lifecycle.• Maintain accurate project documentation, including meeting minutes, progress reports, and action items, ensuring all stakeholders are informed of developments.• Risk Management: Identify potential project risks and work proactively with teams to develop mitigation strategies.• Resource Coordination: Assist in allocating and managing resources effectively to meet project objectives and deadlines.• Quality Assurance Support: Ensure that project deliverables meet IoTronix quality standards and client expectations.• Ability to thrive in a dynamic, fast-paced environment.• Calculate product costs by allocating direct materials, direct labour, and Manufacturing overhead expenses based on volume, UPH, rate. • Analyse variances between standard costs and actual costs, identifying areas for improvement. • Prepare cost reports (PPT) and summaries for review and gap analysis as improvement. • Demonstrated experience working collaboratively in cross-functional teams.
福利制度
Salary: RM8,000 - RM12,000
AL: Starting from 14 days
MC: 14 / 18 / 22 days
<Other benefits>
• Meal subsidy
• Fixed allowances: Phone, transport
• After confirmation: Medical insurance, health screening, dental/optical (They will share more during interview session)
