32 Jobs: Job Vacancies for Other(Mechanical) Engineer Positions
Instrumentation Engineer (Bentong) (Fresh Grads OK)ID:60327
4,000 MYR ~ 10,000 MYRPahangJob Description
Position SummaryThe Instrumentation Engineer is responsible for ensuring the reliability, accuracy, and integrity of all instrumentation, control systems, and automation equipment used across company's rubber thread production facilities. The role supports continuous operations by maintaining, troubleshooting, calibrating, and improving sensors, analyzers, PLC/SCADA systems, and process-monitoring devices throughout the compounding, extrusion, , drying, curing, effluent-treatment, water-treatment, and utilities areas.The ideal candidate has experience in a manufacturing environment, preferably within latex, rubber, polymer, or chemical processing industries, and possesses strong analytical, diagnostic, and problem-solving capabilities.Key Responsibilities1. Instrumentation Maintenance & Troubleshooting- Perform routine inspection, calibration, tuning, and preventive maintenance of all instrumentation devices, including:- Level, flow, pressure, temperature, and pH sensors- Load cells, viscosity meters, thermocouples, RTDs- Dosing-pump controllers, flow meters, and pressure transmitters- Process analyzers in compounding, acid baths, water-bath monitoring, drying ovens, and curing ovens- Diagnose failures and ensure timely corrective actions to minimize downtime in production lines.2. Control Systems & Automation- Knowledgeable in handling and programming Siemens TIA Portal- Support PLC, HMI, and SCADA system troubleshooting, modifications, and improvements (Siemens, Omron, Allen-Bradley or equivalent).- Assist in programming logic corrections, alarm settings, and process-parameter tuning for extrusion control, oven temperature control, talcum-powdering systems, curing profiles, and festooning equipment.- Ensure proper integration of sensors and control elements with mechanical and electrical systems.3. Process Stability & Quality Assurance- Monitor key production parameters- Ensure accuracy of instrumentation data used by Chemical Lab and Physical Lab for QC testing and product-spec verification.- Proactively identify instrumentation-related issues that could impact thread quality (e.g., diameter variations, coagulation inconsistencies, humidity defects, ribboning temperature deviations).4. Project Implementation & Continuous Improvement- Execute instrumentation upgrades, line expansions, and new equipment commissioning.- Recommend improvements for sensor selection, data-logging systems, predictive-maintenance tools, and automation enhancements.- Work closely with mechanical, electrical, chemical, and production teams on reduction of breakdowns and optimization of energy usage.5. Documentation & Compliance- Maintain accurate calibration records, loop drawings, wiring diagrams, and PM schedules.- Prepare technical reports, root-cause analyses, and failure-mode documentation.- Ensure compliance with internal safety procedures, OEM specifications, and industry standards.
Benefit
- Annual Leave 12 days
- 13th months salary
- Accommodation provided
- Higher than industry average performance bonus
- Outpatient Medical (including spouse and dependent) and Dental benefit (Employee only)
- Group hospitalization (including spouse and dependent) and Group Personal Accident (Employee only)
- Public holiday falls on a Saturday, one day is credited to the leave creditsCosting EngineerID:60303
5,200 MYR ~ 7,200 MYRBangi/KajangJob Description
- Analyze customer drawings, specifications, and functional requirements to determine manufacturing feasibility.- Identify and recommend the most cost-effective manufacturing processes.- Prepare detailed cost breakdowns, including material costs, machining cycle time, tooling and fixtures, testing, and packaging.- Collaborate with Production and Engineering teams to validate manufacturability and optimize processes.- Propose Design for Manufacturing (DFM) improvements to reduce cost and enhance machining efficiency.- Work closely with cross-functional departments such as Sheet Metal Fabrication, Assembly, Purchasing, and Sales to ensure alignment on project requirements.- Support quotation preparation and provide technical clarification to customers when required.
Benefit
- Annual Leave: 12 days
- Medical Leave: 14 days
- Travelling Allowance
- Handphone Reimbursement
- Medical & Dental Claim
- Lunch Subsidies
- Yearly increment & bonus
- Uniform provided
- All Gazette Selangor Public Holidays are observed
- Replacement leave for public holidays
- Comprehensive insurance coverageSection Manager of Contract Manufacturing (Kulim)ID:60280
10,000 MYR ~ 13,000 MYRKulimJob Description
• Manage daily business communications and maintain strong relationships with existing contract manufacturer, while leading the development, auditing, certification, and onboarding of new contract manufacturers. • Act as the primary person responsible for handling outsourcing production exceptions, responding promptly and leading the resolution of issues such as material shortages, quality defects, capacity bottlenecks, and delivery delays; Establish and improve standardized processes for exception reporting, handling, and escalation. • Liaise with the planning department to evaluate the master production schedule and demand forecasts, provide contract manufacturers with rolling demand forecasts for joint capacity planning, and monitor raw material inventory and production schedules to ensure alignment with company needs.• Participate in price negotiations and cost analysis with contract manufacturer, including drafting, reviewing, and monitoring the execution of related contracts.• Lead regular factory performance reviews (QBRs) and continuous improvement programs, coordinating cross-functional teams such as planning, quality, R&D, and logistics, and facilitating Sales and Operations Planning (S&OP) meetings to support root-cause resolution and ensure seamless information alignment.• Support team development by providing training to key members, sharing expertise, and fostering a strong, collaborative departmental culture.• Any ad-hoc tasks as per assigned by manager.
Benefit
Salary: RM10,000 - RM13,000
AL: Starting from 14 days
MC: 14 / 18 / 22 days
<Other benefits>
• Meal subsidy
• Fixed allowances: Phone, transport
• After confirmation: Medical insurance, health screening, dental/optical (They will share more during interview session)Mechanical Design Engineer / Mechanical Engineer (PG)ID:58969
10,000 MYR ~ 12,000 MYRBatu KawanJob Description
Core Duties:1. Responsible for project design and planning.2. Drafting technical drawings and preparing related documentation.3. Managing drawings and design documents.4. Troubleshooting design issues during product trial production.Job Responsibilities1. Project design and planning.2. 3D design for projects.3. Preparation of 2D drawings, BOMs, operation manuals, and maintenance manuals. 4. Drafting other technical documentation.5. Organizing, compiling, and archiving project materials.
Benefit
- Phone allowance
- OT allowance
- Optical / Dental = RM300
- Medical = RM500
- Annual Leave
- Compassionate Leave
- Marriage Leave
- Travel AllowanceSenior/Staff Design for Testability (DFT) EngineerID:60263
10,000 MYR ~ 20,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
We are seeking an experienced and strategic Senior or Staff DFT Design Engineer to join our team and in support the company’s ASIC design and IP development initiatives in the area of Design for Testability (DFT) design and verification. The candidate will play a key role in leading the planning and execution of various DFT features implementation and verification.Key Responsibilities:• DFT microarchitecture planning, DFT rtl generation/integration and verification of various DFT feature.• Memory BIST design implementation and verification for IP and ASIC projects.o Mbist logic insertion, integration and verification.o Mbist collateral generations including mbist pattern and timing constraint.• Scan design implementation and verification for IP and custom ASIC.o Scan controller generation (clock/reset control, test compression) implementation and scan chain stitchingo ATPG pattern generations and GLS simulation to verify the scan design.o Scan collaterals generation including scan constraint, scan timing closure, ATPG pattern debug etc.• JTAG/Boundary Scan design implementation and verificationo Tap controller design and verificationo Boundary scan chain implementation at IP and soc level, bscan verification and bsdl generation.• Post silicon debug and test pattern bring up supports to enable silicon power on activities and high-volume manufacturing testing.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementQuality EngineerID:60220
5,000 MYR ~ 8,000 MYRBayan LepasJob Description
This role is responsible for ensuring product quality through inspections, issue resolution, corrective actions, and continuous improvement across manufacturing processes.• Responsible for quality management, quality inspection and quality control during the manufacturing process.• Propose and implement corrective and preventative actions and track their effectiveness shall potential issue arise.• Assist in quality analysis of product quality issues, execute and implement quality improvement plans, track quality improvement plans, track quality improvements and ensure the final resolution of quality issues.• Summarize and analyze various quality data and push responsible departments to resolve issues promptly.• Handle customer complaints, drive improvements and track the effectiveness of corrective actions.• Collaborate with project and technical personnel on new product pilot runs and quality control.• Any ad-hoc tasks as per assigned by manager.
Benefit
Salary: RM5,000 - RM8,000
AL: Starting from 14 days
MC: 14 / 18 / 22 days
<Other benefits>
• Meal subsidy
• Fixed allowances: Phone, transport
• After confirmation: Medical insurance, health screening, dental/optical (They will share more during interview session)Material Planner (Kedah) ID:60041
3,000 MYR ~ 8,000 MYRKulimJob Description
• Develop and maintain material planning strategies to ensure uninterrupted production. • Analyze demand forecasts and adjust material plans accordingly to avoid shortages or excess inventory. • Develop and maintain accurate material plans to meet production schedules, ensureing the availability of materials at the right time and in the right quantity. • Collaborate with internal & external stakeholders such as production planners, SQE and procurement team, to ensure timely material availability & requirements. • Work closely with logistics and warehouse teams to streamline material storage and distribution. • Identify and resolve material shortages, excess stock , and supply chain bottlenecks.• Generate reports on material status, usage, and planning efficiency for management review.• Ensure compliance with company policies, quality standards and industry regulations. • Other duties and assignments as assigned by superiors from time to time
Benefit
Salary: RM3,000 - RM8,000
AL: Starting from 14 days
MC: 14 / 18 / 22 days
<Other benefits>
• Meal subsidy
• Fixed allowances: Phone, transport
• After confirmation: Medical insurance, health screening, dental/optical (They will share more during interview session)Test EngineerID:60018
5,000 MYR ~ 8,000 MYRBayan LepasJob Description
• Improve testing capacity and detection rate.• Responsible for repairing and analyzing defective products in product line.• Manage the debug team, achieve the clearance and closure of defective products, and meet the timely closure of production lines.• Provide daily analysis and summary reports to assist the production team in continuously improving product yield.• Participate in batch or abnormal fault analysis, generate failure analysis reports, and share them with the team to improve yield.• Reduce the loss rate of maintenance materials and control the scrap rate of maintenance products to save costs for the company.• Perform component level analysis on the faults that occur and perform system settings on the PCBA.• Assist in improving production yield, lead the analysis of functional defects that occur during the testing phase of products and propose improvement measures.• Propose further improvement suggestions for the product and evaluate whether the improvement plan is reasonable.• Summarize and statistically analyze the test results, track the tests, and provide feedback.• Any ad-hoc tasks as per assigned by manager.
Benefit
Salary: RM5,000 - RM8,000
AL: Starting from 14 days
MC: 14 / 18 / 22 days
<Other benefits>
• Meal subsidy
• Fixed allowances: Phone, transport
• After confirmation: Medical insurance, health screening, dental/optical (They will share more during interview session)Technical Operation Manager (Mechanical / Electrical)ID:59900
9,000 MYR ~ 13,000 MYRKota Damansara/Petaling JayaJob Description
• Manage and Lead the Hawkeye department to deliver quality and efficient preventive maintenance services and project implementation to our customers.• Manage and Lead Hawkeye Software development team to continue develop DCIM Software.• Maintain support services by meeting the customer’s Service Level Agreement (SLA) terms and conditions• Handling customer complaints or any major incidents such as equipment and or system failure.• Set KPI for engineers and software developer and keep track on their performance.• Ensure all engineers are observing and practice safety measure at all time.• Perform other work as instructed by superior when required.
Benefit
Car Allowance – RM150
Annual Leave – 14 Days
Medical Leave – 14 Days
Medical Claim – RM 800 per annum
Group Insurance – Hospital and Surgical
Performance Bonus – Review annually
Dental – RM 300 per annum
Spectacle – RM 300 Per annumEquipment Engineer (Fresh Grads OK)ID:59834
3,860 MYR ~ 5,360 MYRBukit MinyakJob Description
1. Troubleshoot and repair machine to ensure minimum downtime.2. Work on preventive measure to eliminate unplan downtime.3. Continuous improvement to reduce machine scrap and improve yield.4. Analyse machine rejection and propose solution.5. Ensure analyse and inform quality team if rejection related to incoming component.6. Support quality team to reply customer feedback if any.7. Spare part inventory control. Maintain min and max inventory and review if changes needed.8. Work with vendor to develop new equipment when needed.
Benefit
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performance
