133 Jobs: Job Vacancies for Engineer(Electrical/Semi-Conductor) Positions
Senior Analog Circuit Design Engineer (Highspeed IO Buffer LPDDR6)ID:60080
10,000 MYR ~ 22,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
We are seeking an experienced Analog / Mixed-Signal Circuit Design Engineer to develop high-performance High-Speed I/O analog buffer circuits for LPDDR6 memory interfaces, from architecture definition through tapeout and silicon bring-up. The candidate should have strong hands-on expertise in high-speed analog I/O design, with proven ownership of silicon-proven blocks. Seniority level will be determined based on experience.Key Responsibilities• Design high-speed TX/RX analog buffer circuits for LPDDR6 memory interfaces, including output drivers, input receivers, level shifters, termination, impedance calibration, biasing, and reference circuits.• Define and implement programmable drive strength, slew-rate control, and on-die termination schemes to meet LPDDR6 electrical and timing requirements.• Translate system and interface specifications into detailed transistor-level circuit architectures and design specifications.• Own end-to-end block/IP delivery, including architecture studies, schematic design, pre-layout simulation, post-layout extraction, and sign-off.• Build and maintain verification test benches; validate performance across PVT corners, mismatch/Monte Carlo, aging, and post-extraction parasitics.• Analyze high-speed performance metrics such as eye margin, jitter, timing skew, voltage noise sensitivity, and simultaneous switching effects.• Work closely with layout engineers to provide floorplanning guidance, review critical layouts, and ensure robust matching, isolation, and parasitic control.• Support interface integration and sign-off, including power, performance, area (PPA) optimization and reliability checks (e.g., EM/IR, overstress, aging).• Support testchip and product silicon bring-up, characterization, and correlation with simulation results; drive root-cause analysis and ECOs as needed.• Collaborate effectively with digital design, verification, layout, package, SI/PI, product, and test teams.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementSenior Software Engineer (PLC) ID:60017
6,000 MYR ~ 8,500 MYRBayan BaruJob Description
• Design, development, and implementation of PLC and/or PC based software solutions• Perform system integration, testing and commissioning of advanced control systems for equipment automation system.• Participate in control system requirement analysis.• Involved in drafting of functional specifications and detailed design specification.• Provide technical onsite support to external and internal customers.• Interpret client requirements, identify design parameters, and ensure solutions are implemented accurately and within budget to meet project requirements and schedules• Ensure software issues are resolved in a timely manner
Benefit
Salary package: ~RM5,000 - RM7,000
AL: Starting from 12 days
SL: 14 / 18 / 22 days
<Others>
• Mobile phone reimbursements/transport allowances
• Medical insurance
• Medical claim
*The rest of the benefits, they will be able to share during interview sessionProcess Engineer (Fresh Grads OK)ID:60000
3,860 MYR ~ 6,360 MYRBukit MinyakJob Description
- Developing, optimising and improving manufacturing processes to enhance productivity, quality and safety.- Identifying and implementing process improvements to reduce costs, minimise waste and increase efficiency- Collaborating with cross-functional teams to ensure smooth integration of new processes, technologies and equipment.- Monitoring and analysing process data, identifying trends and proposing solutions for process improvement continuously- Performing process capability studies, statistical analysis and data-driven decision-making t achieve operational excellence and meet production targets- Maintain procedures, control plan and record- Handle customer audit- Support quality team in any customer feedback
Benefit
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performanceSIPI Engineer (Senior/Staff/Principal)ID:59941
10,000 MYR ~ 20,000 MYRBayan Lepas, Bayan BaruJob Description
Job SummaryResponsible for Signal Integrity and Power Integrity (SI/PI) analysis, simulation, lab validation, and customer support for high-speed digital interfaces across chip, package, and board levels.Key ResponsibilitiesSignal Integrity• Simulation for high-speed interfaces: HBM, DDR, LPDDR, UCIe, MIPI• Crosstalk, reflection, impedance, and eye-diagram analysis• Transmission line modeling and stackup reviewPower Integrity• Power delivery network (PDN) analysis and optimization• Decoupling capacitor selection and validation• PDN impedance measurement and simulation correlationTools & Methods• SI/PI tools: HyperLynx, Ansys SIwave, Cadence Sigrity• Lab equipment: TDR, VNA, high-speed oscilloscope• S-parameter, Y/Z-parameter and multi-port matrix analysis Collaboration• Work with chip, package, PCB design, and layout teams• Support customers on board design reviews and technical queries• Participate in design reviews, failure analysis, and root-cause debugging
Benefit
- Annual Leave 14 days
- Medical Leave
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementProcess Engineer (Junior/Senior) (JB)ID:59971
5,000 MYR ~ 8,000 MYRJohor BahruJob Description
- Responsible for project debugging work, including equipment installation verification, commissioning, parameter adjustment, and performance optimization according to design and debugging plans.- Ensure assembled equipment is properly installed as per design requirements and complies with mechanical and electrical inspection standards.- Conduct preliminary and detailed commissioning to verify equipment functions and performance meet specifications.- Identify issues during debugging, analyze root causes, and provide quick resolution or improvement suggestions.- Maintain 5S standards for debugging machines and surrounding work areas.- Work closely with mechanical, electrical, and software teams to ensure smooth commissioning and delivery of equipment.- Carry out Checklist document checks to ensure equipment meets design and usage requirements.- Assist in verification of control plans and support validation with process, quality, or customer teams.- Provide technical support, equipment setup, commissioning, and operator training at customer sites during business trips.- Collect equipment operation data and user feedback for performance analysis and improvement suggestions.- Handle customer technical inquiries during equipment usage.- Participate in continuous self-improvement, training programs, and cross-departmental support tasks as assigned.
Benefit
- Annual Leave starting from 10 days
- Phone allowance
- OT allowance
- Optical / Dental = RM300
- Medical = RM500
- Compassionate Leave
- Marriage Leave
- Travel AllowanceProcess Engineer (Junior/Senior) (PG)ID:59970
5,000 MYR ~ 8,000 MYRBatu KawanJob Description
- Responsible for project debugging work, including equipment installation verification, commissioning, parameter adjustment, and performance optimization according to design and debugging plans.- Ensure assembled equipment is properly installed as per design requirements and complies with mechanical and electrical inspection standards.- Conduct preliminary and detailed commissioning to verify equipment functions and performance meet specifications.- Identify issues during debugging, analyze root causes, and provide quick resolution or improvement suggestions.- Maintain 5S standards for debugging machines and surrounding work areas.- Work closely with mechanical, electrical, and software teams to ensure smooth commissioning and delivery of equipment.- Carry out Checklist document checks to ensure equipment meets design and usage requirements.- Assist in verification of control plans and support validation with process, quality, or customer teams.- Provide technical support, equipment setup, commissioning, and operator training at customer sites during business trips.- Collect equipment operation data and user feedback for performance analysis and improvement suggestions.- Handle customer technical inquiries during equipment usage.- Participate in continuous self-improvement, training programs, and cross-departmental support tasks as assigned.
Benefit
- Annual Leave starting from 10 days
- Phone allowance
- OT allowance
- Optical / Dental = RM300
- Medical = RM500
- Compassionate Leave
- Marriage Leave
- Travel AllowanceTechnical Operation Manager (Mechanical / Electrical)ID:59900
9,000 MYR ~ 13,000 MYRKota Damansara/Petaling JayaJob Description
• Manage and Lead the Hawkeye department to deliver quality and efficient preventive maintenance services and project implementation to our customers.• Manage and Lead Hawkeye Software development team to continue develop DCIM Software.• Maintain support services by meeting the customer’s Service Level Agreement (SLA) terms and conditions• Handling customer complaints or any major incidents such as equipment and or system failure.• Set KPI for engineers and software developer and keep track on their performance.• Ensure all engineers are observing and practice safety measure at all time.• Perform other work as instructed by superior when required.
Benefit
Car Allowance – RM150
Annual Leave – 14 Days
Medical Leave – 14 Days
Medical Claim – RM 800 per annum
Group Insurance – Hospital and Surgical
Performance Bonus – Review annually
Dental – RM 300 per annum
Spectacle – RM 300 Per annumEmulation and Prototyping Engineer (Senior/Lead)ID:59881
10,000 MYR ~ 20,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
We are seeking a highly skilled and motivated Senior or Lead Emulation and Prototyping Engineer to define and lead emulation strategies for IP, complex SoC and system-level projects. This role requires a strong technical leader who can work independently, while also collaborating closely with system architects and pre-silicon verification teams to drive successful pre-silicon validation, firmware development, and early software enablement using industry-leading emulation/prototyping platforms.Key Responsibilities:• Define and lead the emulation and prototyping strategy for IP & SoC programs to support architectural validation, functional verification, and software bring-up.• Work closely with chip architects to understand IP & system-level design goals and translate them into emulation requirements and constraints.• Collaborate with pre-silicon design verification engineers to integrate emulation/prototyping into the broader verification strategy and identify high-value use cases.• Partition and map RTL designs to commercial emulation/prototyping platforms (e.g., Cadence Palladium, Synopsys ZeBu, Mentor Veloce).• Develop emulation models, transactors, and hybrid environments (e.g., simulation + emulation or virtual platforms).• Lead bring-up and debug activities of the emulation/prototyping environment, ensuring performance, accuracy, and reusability.• Drive the development of automated test environments, infrastructure, and scripts to enable fast deployment and repeatability.• Support firmware and software teams with stable and functional pre-silicon platforms for development and debug.• Maintain comprehensive documentation including emulation and prototyping setup guides, debug workflows, and system usage instructions.• Mentor junior engineers and evangelize emulation best practices across engineering teams.
Benefit
- Annual Leave
- Medical Leave
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementEquipment EngineerID:59834
3,860 MYR ~ 5,360 MYRBukit MinyakJob Description
1. Troubleshoot and repair machine to ensure minimum downtime.2. Work on preventive measure to eliminate unplan downtime.3. Continuous improvement to reduce machine scrap and improve yield.4. Analyse machine rejection and propose solution.5. Ensure analyse and inform quality team if rejection related to incoming component.6. Support quality team to reply customer feedback if any.7. Spare part inventory control. Maintain min and max inventory and review if changes needed.8. Work with vendor to develop new equipment when needed.
Benefit
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performanceSales & Application EngineerID:59889
5,000 MYR ~ 8,000 MYRShah AlamJob Description
1. Responsible for Sales & Marketing in all multidiscipline engineering activities for Gas Turbine/ Gas Engine Co-generation project.2. Identified new prospects to achieve sales goals and developing sales strategies.3. Promote and identify new prospects as well as new segment area.4. Perform project feasibility studies, presentation, technical and commercial proposals.5. Any sales & application task assigned, etc
Benefit
Total salary package: RM5,000 - RM8,000
Monthly fixed allowances:
◆ General Allowance: RM 220.00
◆ Travel Allowance: RM350.00
◆ Sales Allowance: ~RM200.00 (They will share during the interview session)
Total fixed allowances: ~RM770.00
Other benefits:
◆ Company's provide phone (iPhone) & mobile line
◆ Travel/Petrol and Toll Allowance (Pay and Claim)
◆ Bonus: Subject to Performance & Company Performance/month
◆ Travel/Petrol and Toll Allowance (Pay and Claim and without late or leave early)
◆ AL: 14 days for service less than 3 yrs. After 3 yrs 21 days.
◆ MC: 14 days
◆ Attendance Allowance
◆ Company Activities: CNY, Hari Raya, Deepavali
◆ Long Service Award
◆ Outstation allowances: