128 Jobs: Job Vacancies for Engineer(Electrical/Semi-Conductor) Positions
Senior Electric Engineer ID:55979
9,000 MYR ~ 11,000 MYRPeraiJob Description
- Plan and Organize: Figuring out the best way to make the products. including planning how much of each part is needed and how to assemble everything efficiently.- Fix Problems: If something goes wrong during production, working to fix it quickly so that the factory can keep making products without big delays.- Improve Processes: looking for ways to make production better, faster, and cheaper, but still keep the quality of the products high.- Ensure Safety: Making sure that the workplace is safe for everyone and that the machines are used correctly.(Japan Side handing Design)- Communicate with clients in Netherlands
Benefit
- EPF, SOCSO provided
- AL:10days(first year), after that additional 2days every year(Maximum 20days)
- MC:14days(first year), after that additional 4days every year(Maximum 22days)
-Transportation allowance:(RM100-200/month depends on range)
-Meal Allowance: (RM100/per month)
-Medical Allowance: RM50/per 1time(unlimited)
-Canteen
-Insurance
-Uniform ＆ Shoes
-Long-service awardPhysical Design Lead EngineerID:60207
10,000 MYR ~ 20,000 MYRBayan Lepas, Bayan BaruJob Description
We are seeking a Physical Design Lead to own and drive the end-to-end physical implementation of testchips and high-speed interface subsystems such as DDR/LPDDR PHY, HBM PHY, and UCIe from netlist through tape-out-ready GDSII on leading-edge process nodes. This is a technical lead role: candidate is expected to take full ownership of implementation scope, mentor junior PD engineers, define methodology, and drive cross-functional coordination with RTL design, DFT, analog/custom layout, and verification teams. Seniority level to be determined by experience.Key Responsibilities• Own end-to-end physical implementation of assigned testchip or high-speed interface subsystem (DDR/LPDDR, HBM, UCIe, or equivalent): floorplanning, power grid design, placement, clock tree synthesis (CTS), routing, and chip finishing through to GDSII stream-out.• Coordinate timing closure across all functional modes and PVT corners with the dedicated full-chip STA owner; provide timing-aware physical implementation decisions, flag routing and placement contributors to timing degradation, and execute physical ECOs as directed.• Lead chip-level or subsystem-level floorplan definition: partition boundaries, I/O ring assembly, hard IP (PHY, memory, custom analog) placement, power domain planning, and bump/pad assignment; balance area, routability, and signal-integrity constraints.• Define and enforce the physical design methodology and flow for the team: synthesis-to-P&R handoff conventions, ECO management, signoff checklists, and documentation standards; develop and maintain flow automation scripts for regression, reporting, and incremental ECO runs.• Drive power integrity sign-off: static and dynamic IR-drop analysis (Redhawk/Voltus or equivalent), EM rule compliance, power strapping strategy, and decap insertion; collaborate with circuit and layout teams to resolve violations.• Coordinate physical verification closure (DRC/LVS/ERC/Antenna) using Calibre or equivalent, including custom analog and mixed-signal IP integration; manage foundry rule deck updates and waiver documentation.• Interface with RTL designers, DFT engineers, and analog/custom layout engineers to align on design constraints, resolve integration issues, and ensure clean handoff at each project milestone; represent physical design in architecture and tapeout readiness reviews.• Mentor and technically guide junior and mid-level physical design engineers; review their floorplans and closure strategies; provide actionable feedback and escalate risks proactively to the program lead.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementProject Engineering LeaderID:60201
6,000 MYR ~ 7,500 MYRBangi/KajangJob Description
The Project Engineering Lead oversees all project management and manufacturing operations, ensuring projects are delivered on time, within budget, and to quality standards. This role involves coordinating with customers, internal teams, and suppliers while continuously improving processes and departmental performance.1. Project Management & Customer CoordinationLead project kick-offs, review customer drawings, and coordinate with internal teams and suppliers to ensure timely and reliable project delivery.2. Factory Layout & Process DesignDevelop 2D/3D factory layouts, including equipment and process layouts, and design jigs and production processes in collaboration with suppliers.3. Supplier Management & Negotiation-Negotiate lead times, costs, and manage supplier relationships to optimize production schedules and expenses.4. Production & Manufacturing OversightSupervise production activities, including manpower planning, machine capacity optimization, quality control, and resource utilization across production lines.5. Process Improvement & Performance MonitoringEstablish KPIs, prepare monthly reports, identify recurring production issues, and implement improvements to enhance departmental efficiency.6. Departmental Operations & Team ManagementEnsure compliance with ISO standards and regulatory requirements, manage departmental budgeting and cost control, and conduct performance appraisals for team members.
Benefit
- AL: 14 days
- MC: 14 days
- EPF, SOCSO
- Bonus (Depends on company performance)
- Salary Increment(Once a year)Senior Field Support Engineer (Test Socket)ID:60206
6,000 MYR ~ 8,000 MYRGelugurJob Description
As a Senior Field Support Engineer, provide technical and on-site support for test socket products throughout the design and post-sales phases.Collaborate with internal teams and customers to resolve issues, improve performance, and ensure smooth qualification processes.Conduct evaluations, troubleshooting, and technical presentations to enhance customer satisfaction and product reliability.- Provide technical support to customers on test sockets (pre- and post-sales).- Respond to technical inquiries and assist in prototype design from a field application perspective.- Support qualification and evaluation of test sockets at customer sites.- Work closely with internal teams to propose improvements and resolve issues quickly.- Troubleshoot and provide on-site solutions to prevent production downtime.- Prepare and deliver technical presentations and reports for customers and management.- Coordinate information with QC, Engineering, Production, and Sales teams.- Participate in meetings, trade shows, and technical events as needed.
Benefit
- AL: starting from 10 days
- MC: starting from 14 days
- Fixed transport allowance: RM 100
- AWS (1 month fixed bonus)
- Performance Bonus (Max 1.75 monthly salary)
- Medical Insurance (Personal Accident, Outpatient and Hospitalization)
- Annual Health Screening
- Dental Claims RM200 per year
- Annual IncrementLogic Design Engineer / RTL Design Engineer (Senior/Staff/Principal)ID:60086
8,000 MYR ~ 35,000 MYRBayan Lepas, Bayan BaruJob Description
Job SummaryThe Logic Design Engineer will be responsible for the architecture, design, implementation, and delivery of high-performance digital IPs and subsystems for ASIC/SoC products. The role involves microarchitecture definition, RTL development, functional validation support, timing convergence, and IP release activities while collaborating closely with architecture, verification, physical design, firmware, and system teams to achieve performance, power, area (PPA), and quality targets.The engineer will take ownership of IP or subsystem-level RTL implementation from specification through customer release and contribute to design quality through lint, CDC, formal verification, timing closure, and design reviews.Key Responsibilities1. RTL Design & Microarchitecture• Define and implement block-level or subsystem-level RTL architecture based on product specifications.• Develop high-quality RTL using Verilog/SystemVerilog for ASIC/SoC products.• Participate in microarchitecture definition and document design decisions.• Ensure RTL complies with coding standards, synthesis guidelines, and design methodologies.• Review RTL implementation and participate in peer design reviews.2. Digital IP Development• Own assigned digital IPs or logic blocks from specification through implementation and release.• Design high-speed digital logic capable of achieving timing closure on advanced process nodes.• Collaborate with architects, firmware, and system engineers to ensure correct feature implementation.• Support IP integration into subsystem or SoC environments.3. Design Quality & Verification Support• Produce functional test plans covering design requirements.• Support Design Verification teams in debugging simulation failures and functional issues.• Perform and resolve: Lint, CDC/RDC, Formal Equivalence Verification (FEV), Low Power (UPF/CPF)• Participate in coverage closure and verification reviews.4. Timing & Design Closure• Work closely with Physical Design and STA teams to achieve timing closure.• Support synthesis, timing optimization, clock-domain crossing, and low-power implementation.• Develop and validate timing constraints (SDC) and power intent where applicable.• Resolve setup/hold timing issues and support floorplan optimization.5. IP Release & Documentation• Own IP release deliverables including RTL packages, documentation, and quality sign-off.• Prepare design documentation, architecture specifications, and implementation reports.• Ensure all deliverables meet internal quality standards and customer requirements.6. Cross-functional Collaboration• Work closely with Architecture, DV, Physical Design, Firmware, Validation, and System Engineering teams.• Participate in design reviews, technical discussions, and project planning.• Contribute to continuous improvement of RTL design methodology and automation flows.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementStaff Test Operations EngineerID:60151
7,867 MYR ~ 11,233 MYRKulimJob Description
【Job description】This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).【Key Responsibilities】- Responsible for Test Operations interface to our company's Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle- - Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)- Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from our company's Product Group groups- Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand- Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development- Implement best known practices and process within test manufacturing sites- Drive Gross Margins (OEE, Yield, Retest) improvement initiatives
Benefit
Annual Salary Range :RM94400-RM134800
(Monthly: RM7,867-RM11,233)
*Regarding the employee benefits, please check them directly with the company during your interview.Senior Test Operations Engineer ID:60157
6,417 MYR ~ 9,167 MYRBayan LepasJob Description
【Job description】This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).【Key Responsibilities】- Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle- Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)- Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups- Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand- Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development- Implement best known practices and process within test manufacturing sites- Drive Gross Margins (OEE, Yield, Retest) improvement initiatives
Benefit
Annual Salary Range ::RM77000-RM110000
(Monthly: RM6,417-RM9,167)
*Regarding the employee benefits, please check them directly with the company during your interview.【Japanese Speaker】 Production Planner (Fresh Grads Welcome!)ID:60139
3,800 MYR ~ 4,800 MYRShah AlamJob Description
• Planning, scheduling and coordinating production• Evaluating raw materials and equipment to ensure everything is in place for production• Scheduling shifts and workers to provide proper coverage• Watching costs to ensure the production process stays within budget• Reporting on the production status and any production issues to upper management• Handling production disruptions and productivity problems• Finding ways to improve productivity and reduce costs• Using market forecasts and competitive analysis to anticipate necessary production changes• To communicate with HQ
Benefit
Salary range: RM3,800 - RM4,800 + Fixed allowances
Employee Benefits
- Annual Leave
- Medical Leave
- EPF, SOCSO
- Medical Insurance
- Meal Allowance work in office, in canteen
- Attendance Allowance
- Business Trip Opportunity
- Fix Bonus
- Increment/ Performance Review
- Company Uniform
Fixed Allowance
- Responsibility Allowance
- Housing Allowance
- Transportation Allowance[ Malacca ] Sales EngineerID:59752
4,500 MYR ~ 6,000 MYRMalaccaJob Description
・Prepare and sharing of technical presentations on how a product works and solves a customer’s specific problem・Work with existing customers to understand their needs and perhaps design a customized setup or "spec" to solve problems・Communicate and coordinate with head office for purchases, technical and administration support required facilitating the customers' requirements・Communicate and updating to department head to ensure that sales and customer objective are met・Handle the technical details of Requests for Proposals and provide accurate data for official quotations・To develop the sales and market/product presence for the Malaysia market to maximize sales revenues and meeting corporate objectives・Provide feedback from the field to the R&D or Product team to help improve future versions of the product
Benefit
・Basic Salary = RM 4,500 ~ RM 6,000
・AL: 8 days (increase based on service year)
・MC: <2Y 14d, 2~5Y 18d, >5Y 22d
・Car Allowance (rate is differ base on region and position)
・Outstation Allowance (rate is differ base on distance, region and position)
・Mileage (rate is differ base on distance, region and position)
・Medical Claim: RM1,000/year (claim basis)
・Optical Allowance: RM 500/2 years (after 2 years employment)
・Dental Allowance: RM500/year
・Insurance: Group Medical Insurance, Group PASales & Marketing ManagerID:60138
10,000 MYR ~ 15,000 MYRBukit MinyakJob Description
1. Strategic Leadership• Define and execute the overall strategy for the Sales, Marketing, and R&D departments.• Align group objectives with company goals to drive sustainable growth.• Lead cross-functional collaboration to create customer-centric innovations and go-to-market plans.2. Sales & Business Development• Set sales targets and monitor performance.• Expand new markets, key accounts, and strategic partnerships.• Ensure customer relationship excellence and retention.3. Marketing• Oversee branding, market positioning, and digital marketing strategies.• Ensure effective market research, competitor analysis, and product positioning.• Drive campaigns that increase visibility and sales.4. People Management• Lead, coach, and develop high-performing teams across the two departments.• Foster a culture of collaboration, accountability, and innovation.• Manage performance, recruitment, and succession planning.5. Reporting & Budgeting• Oversee departmental budgets, forecasts, and KPIs.• Provide timely reports and recommendations to top management.
Benefit
- Annual Leave from 12 days
- Travel Allowance
- Phone Allowance
- Performance Bonus
- Medical Claims
- Medical Insurance
