5 Jobs: Job Vacancies for Quality Control/Production Management Positions
Quality Assurance Engineer (Validation & Verification)ID:61193
5,000 MYR ~ 6,500 MYRSimpang Ampat, Bukit MinyakJob Description
Responsibilities:- Responsible for reviewing and maintaining validation & verification activities to ensure manufacturing processes, equipment, software systems, test methods, and facilities comply with applicable regulatory requirements, Quality Management System (QMS) standards, and applicable global medical device regulations.- Participate in new project introduction and project transfer qualification activities, such as lead on qualification and validation strategies.- Coordinate validation activities for software used in production, quality, and manufacturing processes where appropriate.- Ensure validation and verification documentation is accurate and meet applicable regulatory expectations.- Perform periodic review and revalidation activities as required.- Coordinate and support investigations involving nonconformances, customer complaints and/or audit findings related to validation. Follow-up on the corrective and improvement actions as required.- Support measurement system verification activities, including Gauge R&R and measurement system analysis (MSA).- Provide training to quality technicians, inspectors or relevant personnel on validation requirements and best practices when necessary.- Other responsibilities are subject to the arrangement of the immediate superior/management.Authority:- Make the decision on validation & verification acceptance criteria.- To stop production or shipment when nonconformance is found due to not meeting validation and/or verification requirements.
Benefit
- Annual Leave:
0-2 years: 16 days
2-5 years: 20 days
5 years above: 23 days
- Medical Leave
0-2 years: 14 days
2-5 years: 18 days
5 years above: 22 days
- Company Insurance
- Medical Claim: RM 1,500 / year
- 13 months Bonus (December)
- Performance Bonus (before CNY)
- Transport Allowance: RM10/day
- Phone & Internet Allowance: RM100
- OT Claims
- Mileage: RM 0.80 / kmQuality Assurance Engineer (Metrology & Lab)ID:61062
5,000 MYR ~ 7,000 MYRSimpang Ampat, Bukit MinyakJob Description
Responsibility:- Responsible for overseeing the daily operation, organization, and housekeeping of the Metrology Laboratory.- Ensure all metrology and testing equipment are properly maintained, calibrated, and available for use.- Involve in new project and transfer project qualification activities. Responsible on measurement equipment and program set up, Inspection Instruction preparation, first article inspection, capability study, measurement system analysis and PPAP packages.- Operate, set up, and maintain OGP (Optical Gaging Products) smart scope, Vision Measurement Systems (VMS), Peel Strength Tester and other relevant tester in the metrology lab.- Develop, modify, and optimize measurement programs to improve inspection efficiency and repeatability.- Guide and provide training to quality technicians and inspectors on inspection methods and criteria.- Coordinate and support investigations involving nonconformances, customer complaints and/or audit findings related to metrology topics. Follow-up on the corrective and improvement actions as required.- Support measurement system verification activities, including Gauge R&R and measurement system analysis (MSA).- Perform dimensional inspection and measurement activities. Prepare test reports and maintain testing records.- Other responsibilities are subject to the arrangement of the immediate superior/managementAuthority:- Make the decision on product inspection criteria.- To quarantine and stop production or shipment when defective products are found.
Benefit
- Annual Leave:
0-2 years: 16 days
2-5 years: 20 days
5 years above: 23 days
- Medical Leave
0-2 years: 14 days
2-5 years: 18 days
5 years above: 22 days
- Company Insurance
- Medical Claim: RM 1,500 / year
- 13 months Bonus (December)
- Performance Bonus (before CNY)
- Transport Allowance: RM10/day
- Phone & Internet Allowance: RM100
- OT Claims
- Mileage: RM 0.80 / kmSenior Quality Assurance EngineerID:61061
5,000 MYR ~ 7,000 MYRSimpang Ampat, Bukit MinyakJob Description
Responsibility:- Lead in assigned new project and transfer project qualification QA related activities. Responsible on Inspection Instruction establishment, preparation, first article inspection, capability study, measurement system analysis and PPAP packages.- Establish Training Need Analysis (TNA) and new or refresher training to quality technicians and inspectors on new and current inspection methods and criteria.- Compile, drive and lead nonconforming product control and failure analysis and follow-up corrective and continuous improvement plan.- Compile and drive Quality report and lead the internal and customer quality review meeting.- Handle and drive customer complaint and conduct failure analysis. Response and follow up on customer corrective action and improvement plan.- Coordinate and drive improvement on RMA activities and sorting / rework activities with supplier and customer.- Responsible for customer process audit, NPI qualification audit and customer system audit.- Responsible on Engineering change order, coordinate purging activities and monitor on documentation revising.- Responsible on supplier quality management.- To ensure RBA, Supplier Code of Conducts requirements are being met.- Other responsibilities are subject to the arrangement of the immediate superior/managementAuthority:- Establish and update the decision on new and current product inspection criteria.- To stop production or shipment when defective products are found in shortage time possible with immediate containment action.
Benefit
- Annual Leave:
0-2 years: 16 days
2-5 years: 20 days
5 years above: 23 days
- Medical Leave
0-2 years: 14 days
2-5 years: 18 days
5 years above: 22 days
- Company Insurance
- Medical Claim: RM 1,500 / year
- 13 months Bonus (December)
- Performance Bonus (before CNY)
- Transport Allowance: RM10/day
- Phone & Internet Allowance: RM100
- OT Claims
- Mileage: RM 0.80 / kmJunior Manufacturing Engineer (Fresh Grads OK)ID:60436
2,500 MYR ~ 3,500 MYRPasir GudangJob Description
- Supervise production and ensure quality.- Solve production issues and improve efficiency.- Optimize production with the engineering team.- Ensure workplace safety.- Analyze production and recommend improvements.- Support continuous process improvement.- Identify and report unsafe practices.
Benefit
- Bonus (Average 2 months Bonus)
- AL starting from 8 days
- MC starting from 14 days
- Transportation allowance: Claim Basis
- Free parking
- Hospitalization Leave
- Group Personal Accident InsuranceQuality Control ManagerID:60518
8,000 MYR ~ 10,000 MYRSepangJob Description
The Quality Control Manager is responsible for establishing, implementing, and continuously improving the company's quality control system to ensure that plastic components meet customer specifications, industry standards, and regulatory requirements. This role is ideal for a hands-on quality professional with experience in a start-up manufacturing environment who is capable of building quality processes from the ground up while supporting business growth.Key Responsibilities• Lead and manage the Quality Control team to ensure product quality throughout incoming, in-process, and final inspections.• Develop, implement, and continuously improve QC procedures, work instructions, inspection standards, and quality documentation.• Establish quality systems and inspection processes suitable for a start-up manufacturing environment.• Ensure products comply with customer specifications, semiconductor industry requirements, and applicable quality standards.• Monitor key quality performance indicators (KPIs) including defect rate, customer complaints, yield, first-pass yield (FPY), scrap rate, and cost of poor quality.• Lead investigations on customer complaints, internal quality issues, and supplier quality problems.• Work closely with Production, Engineering, Maintenance, Procurement, and Supply Chain to resolve quality issues and improve manufacturing processes.• Support new product introduction (NPI), process validation, and qualification activities.• Ensure all measuring equipment is properly calibrated and maintained.• Coordinate internal quality audits and support customer, certification, and supplier audits.• Participate in external audits including customer assessments and certification bodies.• Support implementation and maintenance of quality management systems such as ISO 9001.• Ensure compliance with cleanroom practices, contamination control, ESD requirements, and semiconductor customer expectations where required.• Manage non-conforming materials and ensure timely disposition.• Develop supplier quality monitoring and incoming quality inspection programs.• Prepare quality reports and present performance updates during management review meetings.• Coach, train, and develop QC Inspectors and Quality Engineers to enhance technical competency.• Promote a culture of quality, continuous improvement, and operational excellence.• Participate in Kaizen, Lean Manufacturing, and Six Sigma improvement initiatives.
Benefit
Salary RM 8,000- RM 10,000 ( depend on Experience)
- Work Time: 7:30AM to 5:00PM (Mon to Fri)
- Work Location； Sepang
- AL: 8 days
- MC: 14days
- EPF,SOCSO,EIS
- Medical Allowance – RM1,000 per year, employee only
- Commuting expenses covered – depending on the distance range between RM90 – RM500 per month