6个职位: 招聘信息生产管理(工程师(机械))

Production Manager/Senior ManagerID:58930
9,000 MYR ~ 12,000 MYRBayan Lepas
工作内容
- Responsible for overseeing implementation of company’s policies, procedures and work instruction for higher quality and productivity.- Ensure all related activities are monitored and necessary actions are taken to meet operations KPI and on-time delivery.- Liaise with customers and suppliers as and when required.- Responsible for initiating and implementation of operational expansion and process improvement for quality and cost efficiency improvement.- Lead, coach and motivate subordinates, ensure high morale and teamwork across the organization.- Reviewing the performance of subordinates.- Estimating costs and setting the work standards during the operational expansion and ongoing operations.- Identifying training needs.- Responsible for equipment utilization and yield.- Ensure health and safety guidelines are followed by all operations staffs.- Drafting a timescale for the job being assigned in the operational expansion and ongoing operations.- Undertake other special assignments, ad-hoc job / project as and when required.
福利制度
- Annual Leave:
Less than 2 years – 12 days
2-5 years – 16 days
More than 5 years – 20 days
- Medical Leave
- Dental & Optical claim – RM600 per year
- Specialist treatment claim
- Performance Bonus
- OT claim
- Medical coverage will be under company panel doctor and extended to dependants for married staffs.
- Term Life Insurance for staffs and Hospitalization Insurance scheme
extended to dependants for married staffs.
Heat Treatment Manager (Klin Drying & Thermal Modification)ID:59072
10,000 MYR ~ 12,000 MYRPahang
工作内容
<Key Responsibilities>1. Stacking Standards & Material Preparation • Develop and enforce correct stacking methods for different species and dimensions • Ensure even sticker spacing, airflow paths, board alignment, and load stability• Train stacking teams to minimize: warping, twisting, surface checking, inconsistent drying• Inspect all loads before they enter the kilns/thermal chambers 2. Heat Treatment Cycle Management (KD & Thermal)• Plan, run, and optimize heat-treatment cycles for all species• Ensure accurate control of: temperature ramps, humidity schedules, airflow • Adjust cycles based on board thickness, MC content, grain orientation, and defects• Monitor and analyze live data from sensors and probes• Maintain accurate documentation for every cycle 3. Defect Prevention & Quality Control During Treatment• Conduct QC checkpoints:- Pre-loading moisture content- Mid-cycle sampling- Final MC checks- Visual grading post-treatment• Reduce reject rates caused by:- Warping/bending- Inconsistent MC- Honeycombing- Internal/surface checks- Color inconsistency• Perform root-cause analysis and implement corrective action4. Machine, Kiln & Equipment Reliability • Oversee daily inspection and function checks for:- Kilns- Thermal modification chambers- Fans/blowers- Sensors - Moisture meters • Work closely with engineering to minimize downtime from:- Faulty sensors- Boiler pressure drops- Air leaks- Fan failures- Temperature inconsistencies• Implement preventive maintenance schedule (weekly/monthly)• Ensure calibration of all instruments and controls 5. Continuous Improvement & Yield Optimization • Analyze data to improve recovery %, reduce cycle duration, and lower energy usage• Optimize: - Airflow patterns- Chamber loading capacity- Energy consumption • Lead small trials to improve: - Thermal modification performance - Deeper colour penetration - Durability performance • Set and tract KPIS:- Net Recovery Rate- Reject Rate- Cycle Efficiency - Cost/M(3) Treated 6. Training and Team Competency• Train kiln/thermal operators in proper control, safety, and QC• Build strong discipline for SOPs and documentation• Improve operator understanding of wood behaviour during drying
福利制度
Salary range: ~RM10,000 - RM12,000

<Leaves>
AL: Starting from 16 days
SL: 14 / 18 / 22 days

<Other benefits>
• GPA 24x7 coverage
• GHS coverage up to RM50K/per annum
• Performance/KPI linked bonus
• Production output incentives
• Medical claims for GP treatment
[ Terengganu ] Advanced Manufacturing Engineering (AME) EngineerID:59043
3,000 MYR ~ 4,500 MYRTerengganu
工作内容
< ROLE OVERVIEW >To lead the development and implementation of advanced manufacturing technologies and processes, ensuring innovation, efficiency, and scalability for new product introductions and continuous improvement initiatives.< RESPONSIBILITIES AND DUTIES >Advanced Process Development Design and implement cutting-edge manufacturing processes for new products. Evaluate and integrate automation, robotics, and Industry 4.0 solutions.Technology Assessment & Implementation Research emerging manufacturing technologies and assess feasibility. Drive adoption of advanced tools such as additive manufacturing, smart sensors, and digital twins.New Product Introduction (NPI) Collaborate with design and R&D teams to ensure manufacturability. Develop process flow, tooling, and equipment for new product launches.Continuous Improvement Lead projects to enhance productivity, reduce cycle time, and improve quality. Apply Lean, Six Sigma, and advanced analytics for process optimization.Cost & Efficiency Conduct ROI analysis for new technologies and equipment. Optimize resource utilization and reduce operational costs.Compliance & Safety Ensure all advanced processes meet safety, environmental, and regulatory standards
福利制度
・All-in Salary = RM 3,000 ~ RM 4,500 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 Months
[ Rawang ] Customer Service TechnicianID:59042
2,000 MYR ~ 3,000 MYRRawang
工作内容
Support the Customer Service Engineer at the Customer Production Line Ensure customer line is supported at all times. Support Customer Service Engineer to resolve any issues at the customer end in a timely manner. To feedback to Customer Service Engineer accurate & timely information on all issues at the customer plant.Support all change implementation To support Customer Service Engineer for SQE to evaluate changes made by supplier and carry out fitment at the customer end.Follow up on Engineering Changes & Permits Support Customer Service Engineer for assurance engineering changes & permits are implemented in accordance to accepted procedures. Monitor the cut off for changes is done correctly and effectively.Support Customer Service Engineer in Monitor Quality System Involve in all rework or reprocessing at the Customer plant Control of non-conforming products.Ensure that material respect is followed at all times. Assist in the identification, development and implementation of new work instructions.Problem Solving Participate in problem solving teams.
福利制度
・All-in Salary = RM 2,000 ~ RM 3,000 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 Months
[ Terengganu ] Material PlannerID:59039
3,000 MYR ~ 4,500 MYRTerengganu
工作内容
・Plan, manage, and coordinate the flow of production-related materials to ensure continuous support for manufacturing activities.・Collaborate closely with the Warehouse and Production Planning teams to monitor material status and verify accurate consumption, minimizing the risk of production downtime.・Maintain inventory levels at or below target thresholds, while actively managing and reducing obsolete stock.・Establish and regularly update safety stock levels based on the production schedule and demand forecast.・Monitor and control inbound logistics costs, including efforts to reduce premium freight expenses.・Execute tasks and responsibilities in accordance with instructions and plans provided by the immediate superior.
福利制度
・All-in Salary = RM 3,000 ~ RM 4,500 (inclusive with below allowances)
・AL = 8 days, increase to max after 5yr 16days/yr
・Accommodation Allowance = RM 150
・Meal Allowance = RM 90
・Free Parking
・Outpatient Claim = RM1,000 / yr
・Medical Card coverage includes dependent
・Bonus average 2 Months
** Top performer = 4 Months
Molding Engineer (Fresh Grads OK)ID:58530
3,860 MYR ~ 6,360 MYRBukit Minyak
工作内容
• Responsible follow up and establish new standard for process stabilizing and optimization (procedure, control plan, SOP, FMEA, WI, form)• Repalletized process control• Responsible for Process yield improvement• Compile and analyses yield report• Responsible daily monitor and control production waste /scrap and generate weekly report• Follow up and trouble shooting together with line technicians, if found any abnormality. Provide problem solving (fine tune problem and develop the solution)• Respond to internal and external audits, actions follow- up till closure• Resin stock management• Assist in establish production process control procedure• Assist in optimize production / process running• Work with QA on product quality related matter (especially customer feedback)• To support internal training and training manual preparation• WI and OPL preparation• Handle other tasks and duties as and when requested by Superior
福利制度
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Medical RM600/year & Dental RM300/year
- Toll claimable (Candidate from Island only)
- Transport Allowance RM300
- Internet Allowance RM60
- Individual bonus - 1month fixed
- Increment every year (July) -Rate based on performance