215 Jobs
Senior Analog Circuit Design Engineer (Pure Analog)ID:59651
10,000 MYR ~ 22,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
We are seeking a Circuit/Analog Design Engineer to develop high-performance analog/mixed-signal IPs from architecture through tapeout and silicon bring-up. Seniority level to be determined by experience.Key Responsibilities• Reference generation: bandgap, bias circuits, reference voltages/currents; high-accuracy, low-noise design techniques.• Low offset / low-noise voltage regulators (LDO) and stability/compensation networks; PSRR and transient response optimization.• Voltage and power monitoring circuits: droop detection, voltage detectors, PowerGood and POR generation, analog sensing, and housekeeping blocks.• Power-management components, linear and/or switching-adjacent blocks, charge pumps, as applicable to the SoC/PHY environment.• Design/support ADC/DAC blocks and associated analog support circuits (sampling, references, amplifiers/comparators, clocking).• Voltage and temperature sensor design and characterization. Bandgap and PTAT-based temperature sensing; process corner detection circuits. Sensor readout, digitization, and calibration techniques.• Own end-to-end block/IP delivery: architecture studies, specification, transistor-level design, simulation, post-layout sign-off, and silicon bring-up/characterization.• Build verification test benches; validate performance across PVT corners, mismatch/Monte Carlo (as applicable), and post-extraction parasitics.• Work closely with layout/mask designers: floorplanning guidance, layout reviews, and ensuring LVS/DRC clean implementation and parasitic awareness.• Meet quality and reliability requirements (e.g., EM/IR, aging/overstress); contribute to robust design methodology and sign-off checklists.• Support IP integration on to Testchip as well as post-silicon evaluation including correlation with simulation and root-cause analysis for first-silicon bring-up.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementMechanical Engineer (Project and Design)ID:59647
4,000 MYR ~ 5,000 MYRShah Alam, Other Selangor DistrictJob Description
Mechanical & Structural Design- Perform detailed mechanical and structural design of cranes and material handling systems.- Analyze application requirements and translate them into practical and efficient designs.- Execute engineering calculations to ensure structural integrity, performance, and comp liance with relevant standards.Component Selection- Select appropriate mechanical compo nents based on project requirements.- Ensure all components meet safety, performance, and compliance standards.Design for Manufacturing- Design parts optimized for fabrication, machining, and cost effectiveness.- Collaborate with manufacturing teams to improve production efficiency.- Generate detailed 2D production, 3D models and assembly drawings.Explosion Proof Design- Apply IECEx and ATEX standards in designing equipment for hazardous environments.- Integrate necessary safety features to minimize operational risks.International Project Management- Coordinate international projects with global EPC clients.- Ensure project progress aligns with schedules and deliverables.Project Documentation- Prepare and manage technical documentation, drawings, certi ficates, and records.- Ensure compliance with client and regulatory documentation requirements.
Benefit
- Salary: RM4,000 - 5,000
- Work time: Monday to Friday :8.00am to 5.30pm
- Annual increment and bonus (based on performance)
- AL: 14 days
- MC: 14 days
- Accommodation provided (if required)
- Public holidays in accordance with Selangor's official calendar
- EPF / Socso
- Travel allowance: Claim basis
- Medical and miscellaneous claims
- Free parking【Japanese Speaker】QA QC Engineer (Rubber Contact Dept)ID:59623
4,300 MYR ~ 4,800 MYRShah AlamJob Description
1) Coordinate and investigate customer complaints and quality claims.2) Conduct root cause analysis and prepare reports such as 8D reports.3) Coordinate with production and related departments to identify corrective and preventive actions.4) Extract and interpret product requirements from specifications, drawings and technical documents.5) Support internal and external quality audits.
Benefit
Salary: RM 4,300 - 4,800 (depending on working experiences)
(Basic Salary: RM3,500 - 4,000)
- RM 800 (Language allowance) will be provided with N2 or above certificate
※This will be assessed and decided by the client during the interview.
- AL/YEAR: Less than 2y of svc = 8 days, 2y- 5y of svc = 12, more than 5y svc = 16days
- MC/YEAR: Less than 2y of svc = 14 days, 2y- 5y of svc = 18, more than 5y svc = 22 days
- EPF,SOCSO,EIS
- Medical Allowance
- Insurance
- Commuting expenses covered
- Health check
- Housing / Car Subsidy Shceme【Japanese Speaker】 Automation Engineer (Office Automation dept)ID:59621
4,300 MYR ~ 4,800 MYRShah AlamJob Description
1) Auto Inspection handling (programming, teaching and trouble shoot)2) Window person with KD (sister company at ShenZhen, China); cross technology transfer (quality)3) Automation creative4) New models development
Benefit
- AL/YEAR: Less than 2y of svc = 8 days, 2y- 5y of svc = 12, more than 5y svc = 16days
- MC/YEAR: Less than 2y of svc = 14 days, 2y- 5y of svc = 18, more than 5y svc = 22 days
- EPF,SOCSO,EIS
- Medical Allowance
- Insurance
- Commuting expenses covered
- Health check
- Housing / Car Subsidy ShcemeProject ManagerID:59617
8,000 MYR ~ 10,000 MYRSeri PetalingJob Description
• Manage the planning, organizing and implementation of complex strategic project/initiatives• Monitor of Project Implementation Plan of overall works• Review progress against plans, reporting progress and result to the Management• Lead and coordinate project team to eliminate the obstacle as well as mentoring the team to improve project approach, process and implementation• Develop and monitoring project plan and track project milestones with appropriate process to ensure the project runs according to schedule and budget• Planning work program of project and monitoring stage completion• Monitoring inspections and test are carried out in accordance to the contract specification• Coordinate, review and submission of progress payment to the customer and facilitate timely certification of sub-contractor claims• To liaise with Client• Co-ordinate interfacing activities works of various sub-contractors• Perform other duties as assigned from time to time
Benefit
1) Annual Leave
(<2 years @ 14 days)
(2-5 years @ 17 days)
(>5 years @ 20 days)
2) Medical Leave
(<2 years @ 14 days)
(2-5 years @ 18 days)
(>5 years @ 22 days)
3) Medical Claims (RM800/year) at panel clinic
4) Dental claim (RM300/year)
5) Insurance (after confirmation)
6) Mobile Phone claim (up to RM120)
7) Mileage, parking & toll claim – for site visit/meeting clientAssistant Service ManagerID:59576
6,000 MYR ~ 7,000 MYRPasir GudangJob Description
• Service Operations Leadership: Lead and coordinate daily service operations including field service and workshop activities, ensuring efficient execution of service jobs and timely response to customer requests. • Support Service Business Performance: Support the Service Manager （Head of Department） in achieving service sales targets, revenue growth, and cost control for the service department.• Team Supervision & Development: Supervise service supervisors and technicians, review service reports, and provide coaching and training to improve team capability. Appraisal for all service staff with Service Manager.• Workshop & Inventory Management: Oversee workshop operations, service tools, rental units, and spare parts inventory.• Warranty & Technical Support: Evaluate technical issues and support warranty claim judgment in accordance with company policy.• Safety & Compliance: Ensure compliance with safety standards and company safety policies.• Communication & Reporting: Act as the key person between management and the service team, ensuring clear communication and effective implementation of management directives.
Benefit
Salary range: RM6,000 - RM7,000
• Annual Leave
• Medical leave
<Other benefits>
• Company annual dinner
• Annual bonus (subjected to company and individual performance)
• Medical check-up
• Company tripTool Maker (Stamping)ID:59553
3,000 MYR ~ 4,500 MYRBukit MinyakJob Description
- Maintaining stamping dies in good productive condition.- Analyze problem and repair tooling for corrective action.- Make improvement and propose corrective and preventive action.- Understand and read engineering drawing.- Setup and follow-up on die setup and minor trouble-shooting on press machine.- Assemble new tooling and modification / upgrading.- Operate surface grinding machine for fabrication, resurface and modification.- Completes routine die report for traceability / improvements and communicates effectively through detail information.- Control spare part inventory.- Conduct test runs with completed tools or dies to ensure that parts meet specifications; make adjustments as necessary.- File, grind, shim, and adjust different parts to properly fit them together.- Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.- Inspect finished dies for smoothness, contour conformity, and defects.- Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.- Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.- Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.- Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.- To handle other tasks and duties as and when requested by superior.
Benefit
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Medical RM200/year & Dental RM300/year
- Toll claimable (Candidate from Island only)
- Mobile allowances (Depend)
- Individual bonus - 1month fixed
- Increment every year (July) -Rate based on performanceService EngineerID:59476
3,000 MYR ~ 6,000 MYRKota Damansara/Petaling JayaJob Description
Key Responsibilities:- Travel to client sites in Malaysia and ASEAN for machine installation, maintenance, troubleshooting, and repairs.- Provide technical support and training to client machine operators.- Diagnose mechanical/electrical issues and ensure machines run efficiently.- Prepare service reports and maintain accurate documentation.- Work closely with the engineering team to escalate complex issues.
Benefit
- AL: Starting from 10 days
- MC: Starting from 14 days
- PH: 13 days
- EPF, SOCSO
- Parking allowance RM150
- Travel Expenses Claimable
- Medical Claim
- Medical & Personal Accident InsuranceCircuit Design Engineer (Senior/Staff/Principle)ID:59444
6,000 MYR ~ 30,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/PuchongJob Description
Senior/Staff• Design and implement high speed interfaces and complex mixed-signal circuits using cutting-edge CMOS tech and EDA tools.• Design block IO blocks such as compensation circuit, reference voltage, transmitters and receivers.• Sub blocks include and not confined to , high speed serializers and deserializers, high speed levelshifters , predrivers , drivers , Feed Forward Equalization , DFE , CTLE.• Block to pass rigorous quality and reliability like EM-IR , Aging , Overstress• Run initial SI analysis and IBIS/IBIS-AMI creations.• Timing closure using Prime-Time or equivalent methods.• Work on serial and parallel interfaces.• Work closely with mask designers to deliver the physical design and assist with silicon evaluation.• Perform architecture studies, circuit designs & simulations, floor-planning, instructing mask designers, reliability verifications and silicon bring-up.Principle• Lead and manage team that design and implement high speed interfaces and complex mixed-signal circuits using cutting-edge CMOS tech and EDA tools.• Manage deliveries between function groups for example Layout, RTL , DV , Physical Design and SIPI/Package.• Harmonize schedule and end to end delivery.• Work closely with business development team to understand future projects and resource needed.• First line of clarification and explanation for customer related questions and support.• Work with post silicon team for design intent and required validations.
Benefit
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementShop Drawing Manager(Penang)ID:59199
7,000 MYR ~ 10,000 MYRTanjung Tokong, Tanjung Bungah, Gelugur, Georgetown, Jelutong, Air Itam, Bayan Lepas, Bayan Baru, Batu Maung, Bukit Jambul, Perai, Sebarang JayaJob Description
SummaryThe role focuses on preparing and managing shop drawings, coordinating with project stakeholders, and ensuring quality deliverables.Key Responsibilities- Prepare and manage shop drawings for various projects.- Coordinate with Project Managers, consultants, site staff, design teams, and subcontractors regarding shop drawings.- Review and improve details to align with Kajima Standard Details.- Implement Kajima Standard Details in shop drawings.- Maintain and organize project drawing folders and documents in the Common Data Environment (CDE).- Provide shop drawing registers and schedules to Project Managers.- Support site staff and subcontractors in managing shop drawing operations.- Collect feedback from ongoing or completed projects and share insights for improving the quality of deliverables.- Coordinate, guide, and monitor the performance of junior staff involved in shop drawings.
Benefit
- Annual leave: 10 days
- Medical leave: 14 days
- Medical claims: RM1,000/year
- Accommodation
- OT allowance
- Performance appraisal twice yearly.
Mid year - Increment & promotion
Year end - bonus.