213个职位
Safety & Health Officer (SHO - Green Book)ID:60928
4,000 MYR ~ 6,000 MYRPort Klang工作内容
■ JOB SUMMARYThe Safety & Health Officer (SHO) is responsible for driving, enforcing, and monitoring all occupational safety, health, and environmental compliance at the Global Distribution Centre (GDC).As a DOSH/JKKP Green Book holder, the SHO ensures full compliance with the Occupational Safety and Health Act (OSHA 1994, including 2022 amendments), Factories and Machinery Act (FMA), Environmental Quality Act (EQA), and internal corporate security/EHS standards to maintain a zero-harm workplace.■ JOB RESPONSIBILITIESRegulatory Compliance & DOSH Liaison•Function as the designated Green Book SHO registered with the Department of Occupational Safety and Health (DOSH/JKKP).•Maintain all statutory registers, permits, records, and documentation required under Malaysian safety and environmental laws.•Act as the primary liaison officer for DOSH, BOMBA, Department of Environment (DOE), local authorities, and official audits.•Ensure all machinery and equipment (e.g., Material Handling Equipment [MHE], forklifts, reach trucks, overhead cranes, passenger/cargo hoists) possess valid Certificates of Fitness (CF/PMA/PMT).GDC Warehouse Risk Assessment & Safety Oversight•Establish, review, and maintain HIRARC (Hazard Identification, Risk Assessment, and Risk Control) for all GDC warehouse activities (rack storage, high-reach picking, inbound/outbound staging, loading bays).•Conduct regular site inspections, daily floor walk-throughs, and safety audits across the facility to identify and correct unsafe acts or conditions.•Oversee high-risk operational activities, ensuring proper Permit-to-Work (PTW) implementation (e.g., hot work, working at heights, electrical works, confined spaces).•Enforce traffic management plans within the GDC, including MHE speed limits, pedestrian walkways, loading dock safety, and driver clearance procedures.Incident Investigation & Reporting•Lead immediate investigations for all workplace incidents, accidents, near-misses, and occupational illnesses at the GDC.•Root-cause analysis (RCA) reporting and timely submission of statutory forms (e.g., JKKP 6, JKKP 7, JKKP 8) to DOSH within required deadlines.•Recommend and track Corrective and Preventive Actions (CAPA) to completion.Safety Committee & EHS Training•Serve as the Secretary of the GDC Safety & Health Committee, organizing mandatory quarterly meetings, preparing agendas, and tracking action items.•Plan and conduct EHS induction for all new warehouse operators, staff, third-party logistics (3PL) personnel, contractors, and visitors.•Organize regular toolbox talks, emergency response team (ERT) drills, fire evacuation exercises, and first-aid training.Scheduled Waste & Environmental Management•Oversee the safe collection, labelling, storage, and disposal of Scheduled Waste generated at the GDC in compliance with DOE regulations and the e-SWIS system.•Monitor workplace ergonomics, indoor air quality, lighting levels, and noise exposure standards across picking and packing lines.
福利制度
・AL: <2Y 12d, 2~5Y 14d, >5Y 16d
・MC: <2Y 14d, 2~5Y 18d, >5Y 22d
・AIA Insurance
- Specialist + Normal Outpatient max RM 2,000 / year
- Hospitalization max RM 20,000 / year
・Bonus provided once a year (only if you worked for more than 1 year)
・Annual medical checkup (expenses bear by company)
・Maternity Leave (98 days following labor act)
・Any cost on travel (e.g. office to Daiso warehouse, banks etc) reimbursed
・Annual Bonus (based on company performance / average 2 months)
・Engagement Activities
- Company Annual Dinner
- Company Lunch (Birthday, Welcome Ceremony, Farewell ...)Assistant Manager, Production Planning & Control (PPC)ID:60795
8,000 MYR ~ 9,000 MYRKulim工作内容
【Basic Function】To lead and manage Production Planning & Control activities to ensure efficient production planning, material availability, production capacity utilization, inventory control, and on-time delivery in accordance with customer requirements and company objectives.The position is responsible for coordinating closely with Production, Engineering, Purchasing, Warehouse, Quality, Supply Chain, Sales/Customer Service, and Japan Headquarters to ensure production plans are achievable, materials are available, production progress is controlled, and customer delivery commitments are achieved.【Responsibilities】1. Production Planning & Scheduling2. Material Requirements Planning (MRP)3. Inventory & Material Control4. Production Progress & WIP Control5. Customer & Japan Headquarters Coordination6. Capacity Planning7. Semiconductor Manufacturing Planning8. Engineering Change & New Product Planning9. Delivery & Shipment Control10. ERP / MRP System Management11. KPI & Management Reporting12. Continuous Improvement / Japanese Management13. Team Management14. Risk Management & Escalation
福利制度
- Working Hours : 8:00AM～5:00PM (Mon to Fri)
- Work Location: Kulim
- Probation: 6 months
- AL: 14 days
- MC: In accordance with the applicable Employment - Act and company policy
- EPF, SOCSO, EIS: Provided in accordance with Malaysian statutory requirements
- Outpatient Medical Benefit is provided according to company policy
- Group Hospitalization & Surgical (GHS) Insurance, Group Personal Accident (GPA) Insurance and Group Term Life Insurance
- Applicable business trip allowance will be provided in accordance with company policy
- Provided based on employee's residential location and job level.
Maximum Salary (Basic)Supplier Engineer (Penang)ID:60792
4,000 MYR ~ 5,000 MYRKulim工作内容
- Manage and develop suppliers for sheet metal, machining, and welding components.- Conduct supplier audits and process assessments.- Review engineering drawings, specifications, and GD&T requirements with suppliers.- Identify and resolve supplier manufacturing issues.- Evaluate supplier manufacturing processes, tooling, fixtures, and inspection methods.- Support new product introduction, prototype, FAI, and PPAP activities.- Support engineering changes and ensure proper implementation at suppliers.- Work closely with Quality, Engineering, Purchasing, and Production teams.- Visit suppliers regularly for audits, troubleshooting, and improvement activities.
福利制度
- Working Hours : 8:00AM～5:00PM (Mon to Fri)
- Work Location: Kulim
- Probation: 3 months
- AL: 14 days
- MC: In accordance with the applicable Employment - Act and company policy
- EPF, SOCSO, EIS: Provided in accordance with Malaysian statutory requirements
- Outpatient Medical Benefit is provided according to company policy
- Group Hospitalization & Surgical (GHS) Insurance, Group Personal Accident (GPA) Insurance and Group Term Life Insurance
- Applicable business trip allowance will be provided in accordance with company policy
- Provided based on employee's residential location and job level.
- Overtime: 1 to 3 hours as needed, within a monthly limit of 45 hours.Service Engineer (Melaka)ID:60919
3,500 MYR ~ 5,000 MYRMalacca工作内容
- Provide technical support to customers in the field.- Provide machine maintenance support includes repair and PM- Work with cross-functional teams to resolve complex technical issues- Train customers on equipment usage and maintenance procedures
福利制度
- AL: starting from 14 days
- MC: starting from 14 days
- EPF, SOCSO
- Travel Allowance
- Travel Expenses Claimable
- Annual service incentive
- Annual Bonus
- Personal accident insuranceLaser Cut TechnicianID:60921
3,000 MYR ~ 4,500 MYRNibong Tebal工作内容
• Operate CNC laser cutting machines to cut sheet metal according to engineering drawings and specifications.• Load and unload raw materials (metal sheets) onto the laser cutting machine.• Set up machine parameters such as cutting speed, power, and focus according to material type and thickness.• Monitor machine operations to ensure smooth production and prevent defects.• Ensure cutting accuracy and product quality meet customer specifications.• Inspect finished parts using measuring tools (vernier caliper, ruler, etc.).• Identify cutting defects and report abnormalities to the supervisor.• Maintain production records and job documentation.• Perform basic machine setup before production.• Train and coach Laser Cutting Operators on machine operation, setup procedures, cutting parameters, drawing interpretation, quality requirements, and safe working practices.• Provide hands-on technical guidance and on-the-job training to new and existing operators and assess their competency before independent operation.• Develop and improve work instructions, operating procedures, and training materials for laser cutting processes.• Conduct routine cleaning and basic preventive maintenance of the laser machine.• Report machine malfunctions or maintenance issues.• Follow company safety procedures and wear required PPE.• Maintain a clean and organized working area according to 6S standards.• Ensure proper handling and storage of materials.• Support production improvement activities to enhance productivity and reduce material wastage.• Follow standard operating procedures (SOP) and work instructions.
福利制度
- Annual Leave 10 days
- Medical Leave 14 days
- Meal Allowance
- Yearly Bonus
- Salary Increment
- Medical Benefit and Insurance
- Maternity and Paternity LeaveSenior Chemist (Natural Rubber/Latex) (Bentong)ID:60917
7,000 MYR ~ 10,000 MYRPahang工作内容
Job PurposeWe are seeking a highly motivated and technically proficient Senior Chemist who has a solid experience in handling natural rubber latex to drive formulation development, material optimization, and process efficiency in our manufacturing operations. In this role, you will lead laboratory trials, spearhead raw material assessments (from latex, chemicals and compounds), and collaborate closely with production teams to translate lab-scale innovations into robust, cost-effective factory outputs.Key Responsibilities- Formulation & Product Development: Design, test, and optimize chemical compounding and rubber/latex formulations to meet stringent global quality and performance standards.- Process Optimization & Cost Reduction: Identify opportunities for material substitutions and process improvements to drive cost efficiencies (e.g., compounding yield optimization) without compromising product integrity.- Laboratory & Analytical Leadership: Oversee advanced laboratory analyses and instrumental testing; ensure strict maintenance, calibration, and sterilization protocols for all critical lab equipment.- Production Scale-Up & Support: Provide technical guidance and troubleshooting support directly to the production floor during new product introduction and trials.- Quality & Customer Resolution: Investigate technical customer complaints, perform rigorous root-cause stability testing, and generate comprehensive scientific reports to rectify compounding or processing anomalies.- EHS & Compliance: Maintain full compliance with local and international environmental, health, and safety (EHS) legislation within the laboratory and compounding environments.
福利制度
- Annual Leave 12 days
- 13th months salary
- Accommodation
- Petrol allowance
- Higher than industry average performance bonus (can up to 6 months)
- Outpatient Medical (including spouse and dependent) and Dental benefit (Employee only)
- Group hospitalization (including spouse and dependent) and Group Personal Accident (Employee only)
- Public holiday falls on a Saturday, one day is credited to the leave creditsSenior Project & Automation Engineer (Bentong)ID:60916
7,000 MYR ~ 10,000 MYRPahang工作内容
We are seeking an experienced Senior Project & Automation Engineer to lead major CAPEX, plant improvement and manufacturing automation projects.The successful candidate will be based in the Bentong plant and will manage projects from feasibility study and concept development through design, procurement, installation, commissioning and final handover. This position requires strong hands-on automation knowledge and the ability to coordinate management, Production, Maintenance, Safety, contractors and equipment suppliers.Key Responsibilities- Lead manufacturing CAPEX and automation projects from concept to completion.- Prepare feasibility studies, project justifications, technical proposals, budgets, cost-benefit analyses and project schedules.- Develop User Requirement Specifications (URS), technical specifications, layouts, scopes of work and tender documents.- Design, program, troubleshoot and improve PLC, HMI, SCADA and automated control systems.- Integrate VFDs, servo motors, servo drives, sensors, instrumentation, safety devices and industrial robots.- Troubleshoot industrial communication networks, including Modbus RTU/TCP, Profibus, Profinet, Ethernet/IP or equivalent protocols.- Identify opportunities to automate manual processes, improve productivity, reduce cycle time, minimise quality defects and enhance workplace safety.- Manage major CAPEX projects valued at RM1 million and above, including expenditure tracking, progress monitoring and cost control.- Coordinate contractors and suppliers, evaluate technical quotations and support commercial comparisons.- Conduct design reviews, risk assessments, Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), commissioning and performance validation.- Ensure installations comply with approved drawings, specifications, machine-safety requirements and company EHS procedures.- Diagnose repetitive equipment failures and implement permanent engineering solutions through root-cause analysis.- Maintain accurate PLC backups, electrical drawings, control-panel drawings, manuals, spare-parts lists and project documentation.- Develop preventive-maintenance requirements and train Maintenance and Production personnel before project handover.- Monitor project milestones, risks and delays, and provide regular progress reports to management.- Support emergency troubleshooting and production recovery when required.
福利制度
- Annual Leave 12 days
- 13th months salary
- Accommodation provided
- Higher than industry average performance bonus
- Outpatient Medical (including spouse and dependent) and Dental benefit (Employee only)
- Group hospitalization (including spouse and dependent) and Group Personal Accident (Employee only)
- Public holiday falls on a Saturday, one day is credited to the leave creditsSenior Electrical & Software EngineerID:60912
5,000 MYR ~ 6,000 MYRSungai Buloh工作内容
- Design, develop, and implement electrical and software solutions for manufacturing processes and operational systems- Oversee the installation, commissioning, and maintenance of electrical equipment and systems- Develop and maintain software applications and programmes that support operational efficiency and automation- Conduct technical assessments and feasibility studies for new electrical and software projects- Troubleshoot complex electrical and software issues, providing timely resolutions to minimise downtime- Create and maintain comprehensive technical documentation, including system designs, specifications, and operational manuals- Collaborate with cross-functional teams including production, maintenance, and operations to ensure seamless integration of systems- Lead and mentor junior engineers and technical staff, fostering professional development and technical excellence- Ensure compliance with relevant electrical standards, safety regulations, and industry best practices- Manage electrical and software project budgets and timelines- Participate in continuous improvement initiatives to enhance system performance and reduce operational costs
福利制度
- AL 16 days
- PH 18 days
- OT Allowance (below 4k)
- Hospitalization RM15k
- Medical benefits: UNLIMITED Outpatient Medical Claim for employee, spouse and children
- Dental: UNLIMITED for employeeService Engineer (CNC - Electrical & Electronics)ID:60497
2,500 MYR ~ 3,000 MYRKlang工作内容
• Responsible for programming, installation, systems setup, testing• Provide maintenance and service of machines• Provide technical support to customers • Conduct product training, demonstration and technical advices to customers• Develop and maintain close relationship with customers, entertainment after work is necessary• Any ad-hoc tasks as assigned by Supervisor• Area coverage: whole Malaysia
福利制度
◆ Degree Holder Fresh Graduate = RM 3,000
◆ Diploma Holder Fresh Graduate = RM 2,800
== Benefits ==
◆ Annual Leave 8 days, increase 2 days every year. Max 16 days
◆ Company Phone (after probation)
◆ Company Car (after probation)
＊＊Allow personal use
＊＊Car maintenance expenses, car insurance cover by company
＊＊New car change in 4 years cycle
◆ Petrol and toll fully claimable (for client visit)
◆ Outstation transport and accommodation will be covered by client
◆ OT is paid according to law (1.5x~2x by hour)
◆ Meal allowance (during outstation) RM 40/day (or extra RM 40 if overnight)
◆ Performance bonus (averagely 4 months depending on personal and company performance)
** Year 2021: 6 months bonus
** Year 2022: 8 months bonus
◆ 1-3 weeks training in Japan (after probation, based on selection)
◆ Company T-shirts / Company Trip
◆ Group Hospitalization & Surgical, Group Personal Accident, MedicalService Engineer (Robot - Mechanical / Mechatronics)ID:59624
2,500 MYR ~ 3,000 MYRKlang工作内容
• Responsible for programming, installation, systems setup, testing• Provide maintenance and service of machines• Provide technical support to customers • Conduct product training, demonstration and technical advices to customers• Develop and maintain close relationship with customers, entertainment after work is necessary• Any ad-hoc tasks as assigned by Supervisor• Area coverage: whole Malaysia
福利制度
◆ Degree Holder Fresh Graduate = RM 3,000
◆ Diploma Holder Fresh Graduate = RM 2,800
== Benefits ==
◆ Annual Leave 8 days, increase 2 days every year. Max 16 days
◆ Company Phone (after probation)
◆ Company Car (after probation)
＊＊Allow personal use
＊＊Car maintenance expenses, car insurance cover by company
＊＊New car change in 4 years cycle
◆ Petrol and toll fully claimable (for client visit)
◆ Outstation transport and accommodation will be covered by client
◆ OT is paid according to law (1.5x~2x by hour)
◆ Meal allowance (during outstation) RM 40/day (or extra RM 40 if overnight)
◆ Performance bonus (averagely 4 months depending on personal and company performance)
** Year 2021: 6 months bonus
** Year 2022: 8 months bonus
◆ 1-3 weeks training in Japan (after probation, based on selection)
◆ Company T-shirts / Company Trip
◆ Group Hospitalization & Surgical, Group Personal Accident, Medical