60个职位: 招聘信息 其他(半导体)工程师
Senior Analog Circuit Design Engineer (High-Speed I/O)ID:59652
10,000 MYR ~ 22,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/Puchong工作内容
We are seeking a Circuit/Analog Design Engineer to develop high-performance analog/mixed-signal IPs from architecture through tapeout and silicon bring-up. The candidate should have specialized expertise in High-Speed I/O as described below. Seniority level to be determined by experience.Key Responsibilities• Design TX/RX, analog front-end, serializers/deserializers, high-speed level shifters, predrivers/drivers, and termination/impedance calibration blocks.• Equalization: Feed-Forward Equalization (FFE), DFE, CTLE and related adaptation/control loops.• Clocking support for links (e.g., CDR interactions, low-jitter clock generation/distribution as needed by PHY).• SI analysis and creation/validation of IBIS/IBIS-AMI models; channel characterization (insertion loss, return loss, crosstalk) and eye diagram margin assessment.• Own end-to-end block/IP delivery: architecture studies, specification, transistor-level design, simulation, post-layout sign-off, and silicon bring-up/characterization.• Build verification test benches; validate performance across PVT corners, mismatch/Monte Carlo (as applicable), and post-extraction parasitics.• Work closely with layout/mask designers: floorplanning guidance, layout reviews, and ensuring LVS/DRC clean implementation and parasitic awareness.• Support interface integration and sign-off: PPA optimization, reliability checks (e.g., EM/IR, aging/overstress), and timing closure collaboration.• Support IP integration on to Testchip as well as post-silicon evaluation including correlation with simulation and root-cause analysis for first-silicon bring-up.
福利制度
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementSenior Analog Circuit Design Engineer (Pure Analog)ID:59651
10,000 MYR ~ 22,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/Puchong工作内容
We are seeking a Circuit/Analog Design Engineer to develop high-performance analog/mixed-signal IPs from architecture through tapeout and silicon bring-up. Seniority level to be determined by experience.Key Responsibilities• Reference generation: bandgap, bias circuits, reference voltages/currents; high-accuracy, low-noise design techniques.• Low offset / low-noise voltage regulators (LDO) and stability/compensation networks; PSRR and transient response optimization.• Voltage and power monitoring circuits: droop detection, voltage detectors, PowerGood and POR generation, analog sensing, and housekeeping blocks.• Power-management components, linear and/or switching-adjacent blocks, charge pumps, as applicable to the SoC/PHY environment.• Design/support ADC/DAC blocks and associated analog support circuits (sampling, references, amplifiers/comparators, clocking).• Voltage and temperature sensor design and characterization. Bandgap and PTAT-based temperature sensing; process corner detection circuits. Sensor readout, digitization, and calibration techniques.• Own end-to-end block/IP delivery: architecture studies, specification, transistor-level design, simulation, post-layout sign-off, and silicon bring-up/characterization.• Build verification test benches; validate performance across PVT corners, mismatch/Monte Carlo (as applicable), and post-extraction parasitics.• Work closely with layout/mask designers: floorplanning guidance, layout reviews, and ensuring LVS/DRC clean implementation and parasitic awareness.• Meet quality and reliability requirements (e.g., EM/IR, aging/overstress); contribute to robust design methodology and sign-off checklists.• Support IP integration on to Testchip as well as post-silicon evaluation including correlation with simulation and root-cause analysis for first-silicon bring-up.
福利制度
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementTool Maker (Stamping)ID:59553
3,000 MYR ~ 4,500 MYRBukit Minyak工作内容
- Maintaining stamping dies in good productive condition.- Analyze problem and repair tooling for corrective action.- Make improvement and propose corrective and preventive action.- Understand and read engineering drawing.- Setup and follow-up on die setup and minor trouble-shooting on press machine.- Assemble new tooling and modification / upgrading.- Operate surface grinding machine for fabrication, resurface and modification.- Completes routine die report for traceability / improvements and communicates effectively through detail information.- Control spare part inventory.- Conduct test runs with completed tools or dies to ensure that parts meet specifications; make adjustments as necessary.- File, grind, shim, and adjust different parts to properly fit them together.- Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools.- Inspect finished dies for smoothness, contour conformity, and defects.- Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.- Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.- Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.- Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators.- To handle other tasks and duties as and when requested by superior.
福利制度
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Medical RM200/year & Dental RM300/year
- Toll claimable (Candidate from Island only)
- Mobile allowances (Depend)
- Individual bonus - 1month fixed
- Increment every year (July) -Rate based on performanceCircuit Design Engineer (Senior/Staff/Principle)ID:59444
6,000 MYR ~ 30,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/Puchong工作内容
Senior/Staff• Design and implement high speed interfaces and complex mixed-signal circuits using cutting-edge CMOS tech and EDA tools.• Design block IO blocks such as compensation circuit, reference voltage, transmitters and receivers.• Sub blocks include and not confined to , high speed serializers and deserializers, high speed levelshifters , predrivers , drivers , Feed Forward Equalization , DFE , CTLE.• Block to pass rigorous quality and reliability like EM-IR , Aging , Overstress• Run initial SI analysis and IBIS/IBIS-AMI creations.• Timing closure using Prime-Time or equivalent methods.• Work on serial and parallel interfaces.• Work closely with mask designers to deliver the physical design and assist with silicon evaluation.• Perform architecture studies, circuit designs & simulations, floor-planning, instructing mask designers, reliability verifications and silicon bring-up.Principle• Lead and manage team that design and implement high speed interfaces and complex mixed-signal circuits using cutting-edge CMOS tech and EDA tools.• Manage deliveries between function groups for example Layout, RTL , DV , Physical Design and SIPI/Package.• Harmonize schedule and end to end delivery.• Work closely with business development team to understand future projects and resource needed.• First line of clarification and explanation for customer related questions and support.• Work with post silicon team for design intent and required validations.
福利制度
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementDesign Verification Engineer (Senior/Staff/Principal)ID:59121
10,000 MYR ~ 30,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/Puchong工作内容
We are seeking a highly experienced and technically profound Design Verification Engineer. This role will be responsible for RTL verification, debug, functional coverage and SVA assertion development, UVM testbench development, testplan development and new verification methodology.Key Responsibilities- Develop and maintain UVM-based verification environments for IP designs.- Create detailed test plans based on design specifications, architectural documents, and use-case scenarios.- Implement constrained-random testbenches, scoreboards, and monitors to validate functional behavior.- Perform coverage-driven verification, including:a. Functional coverage (covergroups, coverpoints)b. Code coverage (statement, branch, toggle)c. Assertion coverage (SystemVerilog assertions)- Drive coverage closure by identifying gaps and enhancing test scenarios.- Execute gate-level simulations to validate timing, reset sequences, and power-up behavior post-synthesis.- Apply Formal Property Verification (FPV) to prove critical design properties and uncover corner-case bugs.- Debug simulation failures and collaborate with RTL designers to resolve issues efficiently.- Document verification results, coverage metrics, and regression summaries for traceability and quality assurance.
福利制度
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementCircuit Design Manager / Senior ManagerID:59119
15,000 MYR ~ 35,000 MYRBayan Lepas, Bayan Baru, Bandar Sunway/Puchong工作内容
• Lead and manage team that design and implement high speed interfaces and complex mixed-signal circuits using cutting-edge CMOS tech and EDA tools.• Manage deliveries between function groups for example Layout, RTL , DV , Physical Design and SIPI/Package.• Harmonize schedule and end to end delivery• Work closely with business development team to understand future projects and resource needed• First line of clarification and explanation for customer related questions and support• Work with post silicon team for design intent and required validations
福利制度
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementManufacturing EngineerID:58884
3,860 MYR ~ 6,360 MYRBukit Minyak工作内容
Responsibilities• Maintain & troubleshoot any technical problem in production line• To improve production efficiency by planning and analyze process performance, workflow, capacity, space requirements and equipment layout.• Handles & follow up on product ECN/DN• Handles product from other site to Malaysia in the areas of detailed parts drawing, assembly drawing and preparation of Bill of materials and etc.• Carry out any other responsibilities as and when assigned by Superior/Management• To train and supervise production operators in performing their daily work tasks to achieve target• To ensure all production activities and process comply with ISO standards and mandatory regulations• To maintain good housekeeping, safety and hygiene practices• To ensure sufficient stock of spare parts for smooth operation and continuous running to meet customer delivery• To be responsible for capacity, productivity and quality control of any products from the production line• To evaluate processes by designing and conducting research programs, applying knowledge of fabrication, assembly, tooling and materials, conferring with the requirements from vendors• To plan manpower efficiently to achieve labor efficiency and productivityAuthorities▪ Stop machine when there is a quality issue.▪ Work with vendor on equipment and fabrication.▪ Review and change process flow & procedures.▪ Conduct interview for technician position.
福利制度
- AL: 12 days, increase gradually based on company policy.
- Individual Insurance
- Outpatient clinic - RM90 per visitation
(RM1,000 per annum)
- Specialist- RM350 per visitation (RM2,000 per annum)
- Dental (RM300 per annum)
- Transport allowance
- Internet allowance
- Mobile allowance (Depend)
- Toll claimable (Candidate from Island only)
- Individual bonus - 1month fixed
- Increment every year (July) - Rate based on performanceElectrical Engineer (Senior/Team Lead) (JB)ID:57914
6,000 MYR ~ 15,000 MYRJohor Bahru工作内容
Job Responsibilities:1. Lead electrical engineering tasks for projects.2. Evaluate, confirm, and execute the feasibility of electrical solutions.3. Conduct electrical design work, including BOMs, schematics, PLC & HMI programming, and operation/maintenance manuals.4. Provide on-site guidance for electrical installation, inspect construction quality, and oversee final acceptance.5. Perform electrical commissioning, including in-house testing and on-site support at customer locations (with travel requirements).6. Participate in and organize technical training to continuously enhance professional skills.7. Prepare technical training documentation.
福利制度
- Annual Leave starting from 10 days
- Phone allowance
- OT allowance
- Optical / Dental = RM300
- Medical = RM500
- Compassionate Leave
- Marriage Leave
- Travel AllowanceElectrical Engineer (Senior/Team Lead) (PG)ID:57913
6,000 MYR ~ 15,000 MYRSimpang Ampat工作内容
Job Responsibilities:1. Lead electrical engineering tasks for projects.2. Evaluate, confirm, and execute the feasibility of electrical solutions.3. Conduct electrical design work, including BOMs, schematics, PLC & HMI programming, and operation/maintenance manuals.4. Provide on-site guidance for electrical installation, inspect construction quality, and oversee final acceptance.5. Perform electrical commissioning, including in-house testing and on-site support at customer locations (with travel requirements).6. Participate in and organize technical training to continuously enhance professional skills.7. Prepare technical training documentation.
福利制度
- Annual Leave starting from 10 days
- Phone allowance
- OT allowance
- Optical / Dental = RM300
- Medical = RM500
- Compassionate Leave
- Marriage Leave
- Travel AllowanceConsulting Enginner (Mechanical/Electrical)ID:58647
3,300 MYR ~ 6,500 MYRKota Damansara/Petaling Jaya工作内容
1. To provide solutions to potential clients in the Critical Application and Data Centre industry for Mechanical and Electrical (M&E) infrastructure requirements.2. To develop a strong foundation in engineering designs in Electrical and Mechanical applications in the Data Centre industry.3. To provide sound technical and design advice to ensure a smooth delivery of Data Centre projects.4. To be actively involved in Data Centre project implementations, supporting the project team in technical and design areas.5. To provide assistance to the Sales Department in the following areas:- Site visits to potential project sites- Technical Meetings with potential and existing clients- Liaise with vendors and suppliers for cost sourcing- Prepare Bill of Quantities, Design Data and Schematic Drawings- Prepare Solution and Site Preparation Proposals- Prepare product information and data- Prepare tender submittals for current Products and Services- Prepare presentation material for presentation to existing and potential clients- To do active market research on current and trending technology, products and services- To perform other works as instructed by superior when required
福利制度
Transport Allowance – RM 500
Annual Leave – 12 Days
Medical Leave – 14 Days
Medical Claim – RM 600 per annum
Group Insurance – Hospital and Surgical
Performance Bonus – Review annually
Dental – RM 200 per annum
Spectacle – RM200 Per annum
