152个职位: Manufacturing(Electronics/Semiconductors)
Senior Planning Executive (Contract)ID:60199
5,000 MYR ~ 7,000 MYRBayan Lepas工作内容
- Plan, administer and coordinate when receive new orders.- Oversee company vision inclusive of specific Key Performance Indicators (KPI) on quality, production, on time delivery, customers’ satisfaction, continuous improvement and profitability.- Participate in decision making of Master Production Schedule (MPS) loading through proper materials’ sizing.- Analyze, maintain, and execute Materials Requirement Plan (MRP).- Continuously monitor and verify the material pipeline to ensure MRP requirements are met.- Run daily systems reports to determine material shortages that need to be expedited.- Follow-up with appropriate Buyer to ensure materials are available to support Manufacturing use per load plan.- Performs material and capacity analysis in establishing a production schedule for each order, and communicates/resolves related issues.- Analyze potential impact of forecast and production schedule changes on component procurement and production volume.- Ensure materials availability to support production per the MPS through MRP execution, on-time delivery, and coordination of materials movement through receiving to Manufacturing.- Ensure all customers’ Engineering Change Notices (ECN) are implemented in a timely manner.- Monitors material status on upcoming orders and flags and release orders as daily release schedule is defined.- Identify and appropriately address materials supply issues.- Plan and schedule for each Work Order/Job Traveller according to customers’ demand.- Provide Month End Closing Stock to Finance Department.- Work closely with Manufacturing Supervisor and Manufacturing Manager to meet customers’ satisfaction and requirements.- Assist Planning Manager in planning and control production to meet customers’ requirements.
福利制度
- 13 months salary
- Performance Bonus (Average 2 months)
- Transport allowance
- Medical Claim
- Optical/ Dental Claim
- Annual Leave – 14 days
- Life insurance and HospitalizationLogic Design Engineer / RTL Design Engineer (Senior/Staff/Principal)ID:60086
8,000 MYR ~ 35,000 MYRBayan Lepas, Bayan Baru工作内容
Job SummaryThe Logic Design Engineer will be responsible for the architecture, design, implementation, and delivery of high-performance digital IPs and subsystems for ASIC/SoC products. The role involves microarchitecture definition, RTL development, functional validation support, timing convergence, and IP release activities while collaborating closely with architecture, verification, physical design, firmware, and system teams to achieve performance, power, area (PPA), and quality targets.The engineer will take ownership of IP or subsystem-level RTL implementation from specification through customer release and contribute to design quality through lint, CDC, formal verification, timing closure, and design reviews.Key Responsibilities1. RTL Design & Microarchitecture• Define and implement block-level or subsystem-level RTL architecture based on product specifications.• Develop high-quality RTL using Verilog/SystemVerilog for ASIC/SoC products.• Participate in microarchitecture definition and document design decisions.• Ensure RTL complies with coding standards, synthesis guidelines, and design methodologies.• Review RTL implementation and participate in peer design reviews.2. Digital IP Development• Own assigned digital IPs or logic blocks from specification through implementation and release.• Design high-speed digital logic capable of achieving timing closure on advanced process nodes.• Collaborate with architects, firmware, and system engineers to ensure correct feature implementation.• Support IP integration into subsystem or SoC environments.3. Design Quality & Verification Support• Produce functional test plans covering design requirements.• Support Design Verification teams in debugging simulation failures and functional issues.• Perform and resolve: Lint, CDC/RDC, Formal Equivalence Verification (FEV), Low Power (UPF/CPF)• Participate in coverage closure and verification reviews.4. Timing & Design Closure• Work closely with Physical Design and STA teams to achieve timing closure.• Support synthesis, timing optimization, clock-domain crossing, and low-power implementation.• Develop and validate timing constraints (SDC) and power intent where applicable.• Resolve setup/hold timing issues and support floorplan optimization.5. IP Release & Documentation• Own IP release deliverables including RTL packages, documentation, and quality sign-off.• Prepare design documentation, architecture specifications, and implementation reports.• Ensure all deliverables meet internal quality standards and customer requirements.6. Cross-functional Collaboration• Work closely with Architecture, DV, Physical Design, Firmware, Validation, and System Engineering teams.• Participate in design reviews, technical discussions, and project planning.• Contribute to continuous improvement of RTL design methodology and automation flows.
福利制度
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly IncrementSenior Material PlannerID:60166
5,700 MYR ~ 8,200 MYRBangi/Kajang工作内容
Job Summary:Responsible for ensuring material availability to support production execution and customer delivery commitments.Ensures material availability aligns with production plans while managing supply risks, inventory levels, and supply commitments. Job Description:1. Material Planning & Forecasting- Analyze Available-to-Promise (ATP) to determine material availability and validate feasible prior to confirming customer demand requirement/forecast.- Execute daily MRP exception messages, shortage reports, and demand changes to ensure timely material availability.- Evaluate demand–supply alignment on a periodic basis and update the material requirements plan to reflect current priorities and constraints.2. Inventory Management- Manage inventory positions including allocation and ATP balance on a daily basis with focus on critical and constrained materials.- Drive periodic review of inventory policies, including safety stock, buffer strategies, and planning parameters in alignment with demand volatility.- Enforce inventory repositioning actions driven by forecast changes, engineering change (ECN), and product lifecycle transitions, to ensure supply continuity while preventing excess and obsolete inventory risk.3. Supply, Risk & Contingency Management- Track and manage supplier delivery commitments on a daily basis, ensuring strict alignment with material requirement plan.- Drive timely resolution of material shortages, ensuring recovery plans are clearly defined, executed and tracked to closure.- Execute supply mitigation and risk containment actions including expediting, de-expediting, alternative sourcing, and part substitution to minimize production execution and customer delivery.- Secure supply for long lead-time items (LLI) and constrained components on an as-required basis, based on demand signals, MRP exceptions, and supply risk indicators.4. Production Support- Manage and sustain Clear-to-Build (CTB) status as a mandatory prerequisite prior to production execution, ensuring no material-related disruption to Manufacturing Order (MO) release and build activities.- Coordinate material constraints, CTB gaps, and recovery actions to Production Planning on a daily execution basis to ensure proactive production planning adjustments.- Drive production prioritization decisions based on material readiness status, ensuring constrained materials are allocated in alignment with business priorities and customer commitments.- Drive regular execution alignment discussions, providing visibility on material readiness risks impacting production output and delivery performance.5. Cross-Functional Coordination- Coordinate with procurement/sourcing/internal supply team on an ongoing basis for supply management, recovery actions, and escalation handling.- Drive coordination with engineering to ensure timely material substitution and effective control of ECN impacts on supply and production execution.- Collaborate with production on a daily basis to ensure material readiness supports execution plans.- Communicate delivery commitments, supply risks, and mitigation actions on a regular basis to Project, Sales and Account Management teams.6. System & Data Accuracy- Maintain accurate and up-to-date SAP system data on a daily basis, including supply commitment status and material availability.- Drive timely system updates for all changes in demand, supply, and engineering changes.
福利制度
- Annual Leave: 12 days
- Medical Leave: 14 days
- Travelling Allowance
- Handphone Reimbursement
- Medical & Dental Claim
- Lunch Subsidies
- Yearly increment & bonus
- Uniform provided
- All Gazette Selangor Public Holidays are observed
- Replacement leave for public holidays
- Comprehensive insurance coverageStaff Test Operations EngineerID:60151
7,867 MYR ~ 11,233 MYRKulim工作内容
【Job description】This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).【Key Responsibilities】- Responsible for Test Operations interface to our company's Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle- - Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)- Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from our company's Product Group groups- Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand- Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development- Implement best known practices and process within test manufacturing sites- Drive Gross Margins (OEE, Yield, Retest) improvement initiatives
福利制度
Annual Salary Range :RM94400-RM134800
(Monthly: RM7,867-RM11,233)
*Regarding the employee benefits, please check them directly with the company during your interview.Senior Test Operations Engineer ID:60157
6,417 MYR ~ 9,167 MYRBayan Lepas工作内容
【Job description】This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).【Key Responsibilities】- Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle- Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)- Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups- Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand- Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development- Implement best known practices and process within test manufacturing sites- Drive Gross Margins (OEE, Yield, Retest) improvement initiatives
福利制度
Annual Salary Range ::RM77000-RM110000
(Monthly: RM6,417-RM9,167)
*Regarding the employee benefits, please check them directly with the company during your interview.Sales & Marketing ManagerID:60138
10,000 MYR ~ 15,000 MYRBukit Minyak工作内容
1. Strategic Leadership• Define and execute the overall strategy for the Sales, Marketing, and R&D departments.• Align group objectives with company goals to drive sustainable growth.• Lead cross-functional collaboration to create customer-centric innovations and go-to-market plans.2. Sales & Business Development• Set sales targets and monitor performance.• Expand new markets, key accounts, and strategic partnerships.• Ensure customer relationship excellence and retention.3. Marketing• Oversee branding, market positioning, and digital marketing strategies.• Ensure effective market research, competitor analysis, and product positioning.• Drive campaigns that increase visibility and sales.4. People Management• Lead, coach, and develop high-performing teams across the two departments.• Foster a culture of collaboration, accountability, and innovation.• Manage performance, recruitment, and succession planning.5. Reporting & Budgeting• Oversee departmental budgets, forecasts, and KPIs.• Provide timely reports and recommendations to top management.
福利制度
- Annual Leave from 12 days
- Travel Allowance
- Phone Allowance
- Performance Bonus
- Medical Claims
- Medical InsuranceBusiness Development ManagerID:60137
10,000 MYR ~ 15,000 MYRBukit Minyak工作内容
• Identify and pursue new business opportunities within the chemical industry through targeted market research, industry networking, and direct client engagement.• Develop and execute territory growth strategies to capture market share and establish the company as a preferred supplier.• Establish annual and quarterly sales targets in alignment with organizational growth objectives.• Develop accurate sales forecasts and growth projections based on market analysis, customer intelligence, and competitive positioning.• Initiate and maintain professional relationships with prospective and existing clients, serving as a trusted point of contact for chemical supply needs.• Lead contract negotiations with a focus on securing long-term agreements and maximizing commercial value.• Partner with internal teams including supply chain, technical services, and marketing to develop effective sales strategies and ensure seamless service delivery.• Provide market feedback to inform pricing strategies, product positioning, and inventory planning.• Prepare financial projections, pricing models, and sales budgets to support strategic decision-making.• Deliver regular sales reports and performance updates to senior management, highlighting achievements, market trends, and areas for growth.• Deliver professional sales presentations to key decision-makers, clearly articulating value propositions and technical differentiators.
福利制度
- Annual Leave from 12 days
- Travel Allowance
- Phone Allowance
- Performance Bonus
- Medical Claims
- Medical InsuranceSenior Operations ManagerID:60125
8,000 MYR ~ 12,000 MYRShah Alam工作内容
【Summary】Lead the end-to-end setup and operations of a new export-oriented manufacturing facility, including production, localization, quality, and supply chain management. Responsible for driving operational efficiency, cost competitiveness, and stable production while building and leading the operations team.【Job Responsibilities】- Lead the setup and commissioning of a new manufacturing plant and production lines- Establish SOPs, operational workflows, and manufacturing systems- Manage daily CKD/SKD assembly and production operations- Drive productivity improvement, lean manufacturing, and operational efficiency initiatives- Develop and execute localization strategies for components and suppliers- Identify, evaluate, and manage local suppliers across Malaysia and ASEAN- Implement and maintain quality management systems and ensure compliance with US standards- Oversee export operations to the USA, including logistics, shipping, packaging, and documentation- Manage CAPEX/OPEX and drive cost optimization initiatives- Monitor operational KPIs such as OEE, yield, cost per unit, and on-time delivery- Lead continuous improvement and defect reduction activities- Coordinate with international teams, including China-based stakeholders and OEM partners- Build, lead, and manage cross-functional operations teams including production, planning, maintenance, and operations administration- Support production ramp-up and ensure stable manufacturing operations- Handle operational issues, troubleshooting, and plant-level execution activities
福利制度
• Annual Leave
• Medical Leave
• Phone allowance
• EPF
• SOCSO
• Panel Clinic
• Performance bonus depending on company and personal performance
• Claimable expenses
• Annual dinner
• Birthday Celebration
• Team building activitiesSenior Technical EngineerID:60114
6,000 MYR ~ 7,000 MYRSimpang Ampat工作内容
• Machine assembly, standard part and fabrication part receiving, modifcation, alignment, test run, trouble shooting, installation and customer service as define by department Standard Operating Procedure (SOP), Work Instruction (WI) and Customer Specification. • Perform fine tuning, troubleshooting and analyze machine performance related issues followed by initiating rework or changes required.• Lead, support and coordinate with project team to resolve machine performance issues which is not able to solve by Production team within the allocated deadline/ budget/ quality for each project he is assigned including extra hours as needed. • Feedback and update on time to Production Manager/Mechanical Assembly Manager/Project Manager on project progress and issue encounters as define by Standard Operating Procedure (SOP) and Work Instruction (WI). • Records any information discovered during the fine tuning process that would make the process easier and more efficient; Production Improvement Activity. • Assist Production Manager/Mechanical Assembly Manager on section planning and lead improvement activities. • Develop training program and conduct training for production staffs including subcontractors. • Analyzes assembly blueprint and specification manual (for Build To Print) • Responsible for the use of production facilities and individual tools or equipment as define by Company Tools - Term and Condition. (5%) • Follows safety rules and keeps work area clean and organized as define by 5S Best Practice. • Performs other duties and assignments as instructed by superior from time to time.
福利制度
Salary range: RM6,000 - RM7,000
Fixed allowances:
• Phone allowance
• Petrol allowance
AL: Start with 14 days
SL: 14 / 18 / 22 days
<Other benefits>
• Contractual bonus (pro-rated based on confirmation date)
• Annual bonus (based on individual and company performance)
• Medical insurance
<If OT>
• Daily rate RM16/hour
• Min. 2 hours and above
• Claim on monthly basis
<If travelling>
• Daily allowance (Depending on the country they visit)Memory Layout LeadID:60085
10,000 MYR ~ 12,000 MYRBayan Lepas, Bayan Baru工作内容
We are seeking a Memory Layout Lead to independently execute physical layout design and completion of SRAM and/or Register File (RF) memory macros. You will own full-custom layout from floorplanning through DRC/LVS sign-off, working closely with circuit designers to deliver pitchmatched, tape-out-ready memory blocks. Seniority level to be determined by experience.Key Responsibilities• Execute full-custom physical layout of SRAM and/or multi-port Register File (RF) macros, including bit cell arrays, periphery circuits (decoders, wordline drivers, sense amplifiers, write drivers), and I/O rings, to tape-out quality with limited guidance.• Interpret circuit schematics and layout specifications to implement pitch-matched arrays and hierarchical peripheral blocks, ensuring correct device sizing, poly/diffusion pitches, and metal routing within process constraints.• Drive DRC, LVS, and ERC verification to closure independently; track and resolve violations systematically and maintain sign-off records for assigned memory blocks.• Perform parasitic extraction (PEX) and work directly with circuit designers on post-layout simulation correlation; flag and resolve layout-induced timing or performance degradations.• Implement design-for-manufacturability (DFM) best practices: critical layer fill, dummy device insertion, metal density compliance, and multi-patterning coloring at advanced nodes.• Produce accurate layout deliverables including GDS stream-out, LEF abstracts, and associated documentation; maintain revision history and design review records.• Interface with circuit designers and physical verification engineers to resolve layout-toschematic mismatches and drive end-to-end closure on all assigned memory macros.
福利制度
- Annual Leave 14 days
- Medical Leave 14 days
- Medical Insurance
- Dental/Optical RM500/year
- Outpatient RM1000/year
- Performance Bonus
- Yearly Increment
