215个职位
Design Manager / Design CoordinatorID:60649
10,000 MYR ~ 20,000 MYRBayan Lepas工作内容
- Lead and coordinate the project engineering team for project design from programming to IFC design.- Organize routine client and internal engineering team coordination meetings, develop meeting minutes, track ARs, and monitor close-out activities.- Ensure overall project design work follows the company's project execution standards, client requirements and specifications, local compulsory codes, and other applicable regulations.- Organize internal and client project design reviews, and track and monitor the close-out of review comments.- Coordinate and manage discipline/work package interfaces.- Maintain project design change procedures, develop design change logs, and track design changes.- Monitor the overall project design schedule and implement mitigation actions when necessary.- Coordinate with other project stakeholders.- Perform other project design coordination and management tasks.
福利制度
- Annual Leave starting from 8 days
- Medical Leave starting from 14 days
- Transport Allowance
- Meal Allowance
- Medical Benefits
- Performance Bonus
- Yearly IncrementLead Electrical EngineerID:60632
10,000 MYR ~ 20,000 MYRBayan Lepas工作内容
• Responsible for overall power supply and distribution system calculation and design according to project and client specifications, and national codes, including but limited to High-Voltage and Low-Voltage system, lighting, lightning system and fire protection electrical system, etc.• Responsible for concept electrical design research in the early project phase; formulating viable electrical design schemes in accordance with the client requirements and relevant specifications, conducting client communication reporting as well as overseeing the consolidation, analysis, and synthesis of electrical demand information• Lead the selection of electrical equipment, and compile detailed equipment technical parameters and specifications• Assist the purchasing department in equipment procurement, review suppliers' technical data, and participate in technical clarification• Leading and coordinating discipline interface• System shop drawing review & approve, technical submittal review & approval• Project site construction schedule, quality and safety coordination
福利制度
- Annual Leave starting from 8 days
- Medical Leave starting from 14 days
- Transport Allowance
- Meal Allowance
- Medical Benefits
- Performance Bonus
- Yearly IncrementLead Mechanical Engineer (HVAC)ID:60631
8,000 MYR ~ 13,000 MYRBayan Lepas工作内容
• Responsible for the overall calculation and design of HVAC systems in accordance with project requirements and client specifications and national codes, including but not limited to air-conditioning system, de-smoke systems and process exhaust systems, etc. • Lead the team to complete the detailed design of HVAC systems, review design drawings, technical parameters, and solve key technical problems in the design process• Track cutting-edge HVAC technologies in the industry, promote technology optimization and application, and reduce project energy consumption and operation costs• Leading and coordinating discipline interface• System shop drawing review & approval, technical submittal review & approval• Project site construction schedule, quality and safety coordination• Participate in the preparation of technical proposals for project bidding, provide professional technical support, and assist the business team in project negotiation
福利制度
- Annual Leave starting from 8 days
- Medical Leave starting from 14 days
- Transport Allowance
- Meal Allowance
- Medical Benefits
- Performance Bonus
- Yearly IncrementCNC Technician (Working in Shift)ID:60627
3,000 MYR ~ 5,000 MYRBangi/Kajang工作内容
1. To manage 5S activity in the department.2. Good understanding of tooling and machining processes and proficient on FANUC controllers.3. Proficient in engineering drawing/ Solid work / Auto cad software.4. Knowledge in 3 axis and 4/5 axis CNC machine is added advantage.5. To create programs for CNC Machining according to drawing given.6. Work closely with Engineering & Quality Assurance Department to enhance the quality & productivity.7. Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.8. Support first run and start-up of CNC Programs.9. Assist and supervise troubleshooting program errors.10. To monitor machining times and optimize from time to time by implementing new techniques and methods.11. Coordinate with CNC Supervisor in developing, building, or testing prototypes or new products, processes, or procedures. 12. Provide training for CNC Machinist and CNC Setter.13. And any other job as assigned by the Management from time to time.
福利制度
- Annual leave: 10 days onwards
- MC: 14 days onwards
- Medical clinic & hospitalization
- SOCSO
- EPF
- Medical Insurance
- Performance BonusOperation and Maintenance Engineer (Water Treatment)ID:60617
5,000 MYR ~ 6,500 MYRPerai工作内容
Operation and Maintenance:- Monitor and control daily operations of water treatment facilities to ensure optimal performance.- Perform regular maintenance checks and troubleshoot equipment issues.- Implement process improvements to enhance system efficiency and reliability.Project Management and Coordination:- Coordinate project activities, resources, and stakeholders to ensure timely and successful project delivery.- Develop and maintain project schedules, track progress, and address any issues or delays.- Prepare and manage project budgets, including cost estimation and expense tracking.- Facilitate meetings and communication between project teams, clients, and other stakeholders.Reporting:- Prepare and review technical documentation, including maintenance reports, manuals, and compliance records.- Conduct regular inspections and audits to ensure operational compliance.- Ensure adherence to local environmental regulations and standards.Validation:- Developing validation protocols and plans for equipment, processes, systems, or products to ensure compliance with regulatory requirements and industry standards.- Qualifying equipment and instruments to ensure their accuracy and reliability in data collection and analysis.- Analyzing validation data, documenting results, and generating reports to demonstrate compliance and identify areas for improvement.Document Control:- Establishing and maintaining document control systems to ensure that all documentation (e.g., procedures, specifications, records) is accurate, up-to-date, and easily accessible.- Implementing access controls and permissions to restrict access to sensitive or confidential documents as necessary.
福利制度
- Annual Leave 12 days
- Medical Leave
- Incentive base on performance
- Travel claim: double of petrol receipt disbursement.Quality Control ManagerID:60518
8,000 MYR ~ 10,000 MYRSepang工作内容
The Quality Control Manager is responsible for establishing, implementing, and continuously improving the company's quality control system to ensure that plastic components meet customer specifications, industry standards, and regulatory requirements. This role is ideal for a hands-on quality professional with experience in a start-up manufacturing environment who is capable of building quality processes from the ground up while supporting business growth.Key Responsibilities• Lead and manage the Quality Control team to ensure product quality throughout incoming, in-process, and final inspections.• Develop, implement, and continuously improve QC procedures, work instructions, inspection standards, and quality documentation.• Establish quality systems and inspection processes suitable for a start-up manufacturing environment.• Ensure products comply with customer specifications, semiconductor industry requirements, and applicable quality standards.• Monitor key quality performance indicators (KPIs) including defect rate, customer complaints, yield, first-pass yield (FPY), scrap rate, and cost of poor quality.• Lead investigations on customer complaints, internal quality issues, and supplier quality problems.• Work closely with Production, Engineering, Maintenance, Procurement, and Supply Chain to resolve quality issues and improve manufacturing processes.• Support new product introduction (NPI), process validation, and qualification activities.• Ensure all measuring equipment is properly calibrated and maintained.• Coordinate internal quality audits and support customer, certification, and supplier audits.• Participate in external audits including customer assessments and certification bodies.• Support implementation and maintenance of quality management systems such as ISO 9001.• Ensure compliance with cleanroom practices, contamination control, ESD requirements, and semiconductor customer expectations where required.• Manage non-conforming materials and ensure timely disposition.• Develop supplier quality monitoring and incoming quality inspection programs.• Prepare quality reports and present performance updates during management review meetings.• Coach, train, and develop QC Inspectors and Quality Engineers to enhance technical competency.• Promote a culture of quality, continuous improvement, and operational excellence.• Participate in Kaizen, Lean Manufacturing, and Six Sigma improvement initiatives.
福利制度
Salary RM 8,000- RM 10,000 ( depend on Experience)
- Work Time: 7:30AM to 5:00PM (Mon to Fri)
- Work Location； Sepang
- AL: 8 days
- MC: 14days
- EPF,SOCSO,EIS
- Medical Allowance – RM1,000 per year, employee only
- Commuting expenses covered – depending on the distance range between RM90 – RM500 per monthTechnician (Yield Management) ID:60592
2,500 MYR ~ 3,000 MYRMalacca工作内容
Manufacturing Process & Yield Support• Assist engineers with collecting production data to support variability reduction and manufacturing process improvement.• Perform routine data checks and basic analysis using defined methods or templates provided by engineering.• Support yield ramp and quality monitoring activities by preparing data sets and performing preliminary reviews for abnormalities.Issue Investigation Assistance• Provide hands on support during production issue investigations by gathering information, running predefined tests, and consolidating results for engineering review • Partner with process, test, product, and quality teams by supporting communication flow and preparing required data or checklists Defense Line & Variability Reduction Support• Assist in executing activities related to Defense Line enhancement and process variability reduction under engineer guidance• Complete assigned tasks to support line stability improvements, feeding observations and measurements back to engineers Documentation & Reporting • Organize analysis results and compile documentation with clear next steps as directed by engineers, ensuring timely progress toward project milestones • Maintain accurate logs and records of assigned tasks, supporting structured reporting
福利制度
Salary: ~RM2,500 - RM3,000
AL: Starting from 8 days
SL: 14 / 18 / 22 days
<Other benefits>
• Performance bonus - depends on company and individual performance
• Medical coverage
• Personal insuranceProduction SupervisorID:60570
5,000 MYR ~ 6,000 MYRBayan Lepas工作内容
• Oversee the daily production processes for PCBA and SMT lines to ensure efficiency, quality, and timely delivery of products. • Collaborate with cross-functional teams to troubleshoot and resolve production issues, ensuring minimal downtime and maximum productivity. • Implement and optimize manufacturing processes to improve yield, reduce costs, and enhance product quality. • Support new product introductions (NPI) by setting up and validating new processes and equipment. • Monitor production data and KPIs to identify areas for improvement, and drive continuous improvement initiatives. • Lead root cause analysis and corrective actions for process and equipment-related issues. • Ensure compliance with industry standards and company policies, including safety and quality requirements. • Ensure all Operators and line leaders are certified all time. Provide trainings and drive multiskills maturity. • Manage and control production indirect material usage.
福利制度
Salary: RM5,000 - RM6,000
AL: Starting from 14 days
MC: 14 / 18 / 22 days
<Other benefits>
• Meal subsidy
• Fixed allowances: Phone, transport
• After confirmation: Medical insurance, health screening, dental/optical (They will share more during interview session)Field Application Engineer ID:60568
8,000 MYR ~ 10,000 MYRBayan Lepas工作内容
• Perform on-site installation, daily maintenance, troubleshooting and rapid resolution of issues related to test systems to maximize production line availability. • Communicate closely with the factory`s production, test and quality teams to address test related issues in a timely manner. • Support product introduction by deploying, installing, integrating and validating test systems (including automation line, fixture, test instruments and software) at the factory site. • Implement upgrades and modifications to existing test system based in engineering change request. • Deploying, installing, debug and maintain automation test line, appearance machine, packing machine etc. • Prepare ad-hoc reports and provide data driven insights for product and process improvement. • Create and update technical documentation, including system configuration manuals, maintenance guides and troubleshooting procedures.• Any other relevant task assigned by manager.
福利制度
Salary: RM8,000- RM10,000
AL: Starting from 14 days
MC: 14 / 18 / 22 days
<Other benefits>
• Meal subsidy
• Fixed allowances: Phone, transport
• After confirmation: Medical insurance, health screening, dental/optical (They will share more during interview session)Mechanical Engineer (CNC) - PenangID:60558
3,000 MYR ~ 4,000 MYRGelugur工作内容
- Troubleshoot & repair the CNC mechanical, electro-mechanical, electronic, and electrical equipment.- Hands-on CNC machine experience with Japanese, Chinese, and US brands (grinding, turning, machining centers)- Support customer in machine repair tasks & demos on-site- Handle customer enquiries related to machine repair
福利制度
- AL: Starting from 10 days
- MC: Starting from 14 days
- EPF, SOCSO
- Transport Allowance RM300
- Performance Bonus
- Salary Increment once per year
- Company Phone provided
- OT provided
- Medical Claim
- Medical insurance (after 1 year)